Opens in a new tab

ADG408BRZ-REEL7

8-ch mux, 50Ohm RON, +/-15V, TSSOP-16, precision signal routing, industrial grade

14805

Effective Inventory

Image for reference only

Manufacturer Part:

ADG408BRZ-REEL7

Package:

TSSOP-16 (5.00 x 4.40 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADG408BRZ-REEL7 from Analog Devices is an 8-channel multiplexer with 50 Ohm RON in a TSSOP-16 package. Operating from +/-15V dual supply, it provides high-voltage precision signal routing for industrial data acquisition and test equipment.

Key Specifications

RON (typical) 50 Ohm
Channels 8:1 multiplexer
Supply Voltage +/-15 V dual supply
Analog Signal Range -15V to +15V
Switching Time 170 ns (typical)
Charge Injection 20 pC (typical)
Operating Temperature -40C to +85C

Features

  • 50 Ohm typical on-resistance for +/-15V signal range
  • +/-15V dual supply for high-voltage analog signals
  • Break-before-make switching prevents channel shorting
  • 20pC charge injection suitable for precision sampling
  • All channels OFF with EN low for power saving
  • Industry-standard pinout compatible with DG408/MUX08

Applications

  • Industrial data acquisition and process control
  • Precision test and measurement instruments
  • Audio and video signal routing
  • Medical imaging and patient monitoring
Product Introduction: ADG408BRZ-REEL7 Product Introduction

The ADG408BRZ-REEL7 from Analog Devices is an 8-channel monolithic CMOS analog multiplexer in a TSSOP-16 tape-and-reel package. The device switches one of eight inputs (S1-S8) to a common output (D) as determined by 3-bit binary address lines A0-A2. An EN input enables or disables the device. The 50 Ohm typical on-resistance is optimized for +/-15V dual supply operation with analog signal range from -15V to +15V. The device uses a proprietary CMOS process for low charge injection (20pC) and low leakage current. Break-before-make switching prevents momentary channel shorting during transitions. The ADG408 is pin-compatible with industry-standard DG408 and MUX08 devices. All channels turn off when EN is low, reducing power consumption. The device is specified over the -40C to +85C industrial temperature range.

Working Principle: ADG408BRZ-REEL7 Working Principle

The ADG408BRZ-REEL7 uses a high-voltage CMOS process for +/-15V analog switching. (1) Switch Core: Each of the eight channels contains a CMOS transmission gate with complementary N-channel and P-channel MOSFETs in parallel. This provides low and flat on-resistance across the full +/-15V analog input range. (2) Address Decoding: A 3-to-8 line decoder translates the A0-A2 address inputs into one-of-eight channel select signals. The EN input gates the decoder, disabling all channels when low. (3) Break-Before-Make: Internal timing ensures the previously selected channel turns off before the new channel turns on, preventing momentary shorting between channels. (4) Charge Injection: The 20pC charge injection is caused by capacitive coupling from the gate drive signals to the analog channel. Symmetrical switch geometry and complementary drive reduce but cannot eliminate this effect.

Pin Description: ADG408BRZ-REEL7 Pin Definition and Functions
Pin Name Type Function
1 S1 Analog I/O Source 1 input/output
2 S2 Analog I/O Source 2 input/output
3 S3 Analog I/O Source 3 input/output
4 S4 Analog I/O Source 4 input/output
5 EN Input Enable (active high)
6 A2 Input Address bit 2 (MSB)
7 GND Ground Ground
8 VDD Power Positive supply (+15V)
9 VSS Power Negative supply (-15V)
10 A0 Input Address bit 0 (LSB)
11 A1 Input Address bit 1
12-15 S5-S8 Analog I/O Source 5-8 inputs/outputs
16 D Analog I/O Drain (common output)
Application Scenarios: In which products and applications is ADG408BRZ-REEL7 used
  • Industrial data acquisition with +/-15V signal range and 50 Ohm RON
  • Precision test and measurement instruments with 20pC charge injection
  • Audio and video signal routing with break-before-make switching
  • Medical imaging and patient monitoring with 8-channel scanning
Alternative Models: What chips are recommended as replacements for ADG408BRZ-REEL7
Manufacturer Part Number Package Notes
Vishay DG408DY-T1-E3 SOIC-16 Direct equivalent, SOIC
Maxim MAX408CSE+ SOIC-16 Pin-compatible alternative
ADI ADG1608BRUZ TSSOP-16 Low RON (4.5 Ohm) upgrade
TI MUX36S08IRTVR TSSOP-16 Low leakage precision mux

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1