Opens in a new tab

ADG408BRZ

8-ch analog mux, 100R Ron, +/-15V, break-before-make, SOIC-16

5600

Effective Inventory

Image for reference only

Manufacturer Part:

ADG408BRZ

Package:

SOIC-16 (9.90 x 3.90 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADG408BRZ from Analog Devices is an 8-channel LC2MOS analog multiplexer that switches one of eight inputs to a common output based on 3-bit address lines, with 100 Ohm max on-resistance, +/-15V supply, and break-before-make switching in a 16-pin SOIC package.

Key Specifications

Configuration 8:1 multiplexer (1 circuit)
Supply Voltage +/-15V dual or 12V single
On-Resistance 40 Ohm typical, 100 Ohm max
Signal Range VSS to VDD
Supply Current <75 uA
Channel Crosstalk 85 dB typical @ 100kHz
Switching Action Break-before-make
Enable Input Yes (active high)
Address Lines 3 (A0, A1, A2)
Operating Temperature -40°C to +85°C
Package SOIC-16

Features

  • 8:1 analog multiplexer with 100 Ohm max on-resistance and break-before-make
  • +/-15V supply with VSS-to-VDD analog signal range and <75uA supply current
  • Direct replacement for DG408/DG409 with LC2MOS enhanced process

Applications

  • Data acquisition system channel selection and signal routing
  • Audio/video signal switching and automatic test equipment
  • Battery-powered sample-and-hold and communication systems
Product Introduction: ADG408BRZ Product Introduction

The ADG408BRZ from Analog Devices is a monolithic CMOS 8-channel analog multiplexer designed on the enhanced LC2MOS process. The device switches one of eight inputs to a common output as determined by 3-bit binary address lines A0, A1, and A2. An EN (enable) input activates or disables the device, with all channels off when EN is low. The on-resistance is 40 Ohm typical and 100 Ohm maximum over the full signal range and temperature. The LC2MOS process provides low power dissipation (<75uA supply current), high switching speed, and low on-resistance. Each channel conducts equally well in both directions, and the input signal range extends to the supply rails (VSS to VDD). All channels exhibit break-before-make switching action, preventing momentary shorting when switching channels. The device is a direct replacement for the DG408 with improved performance. The RZ suffix denotes the 16-pin SOIC package.

Working Principle: ADG408BRZ Working Principle

The ADG408BRZ operates as an 8-channel analog multiplexer using CMOS transmission gates. (1) Channel Selection: The 3-bit address (A2, A1, A0) is decoded by an internal logic circuit that activates one of eight transmission gates. Each transmission gate consists of parallel N-channel and P-channel MOSFETs, providing bidirectional signal conduction with low and relatively flat on-resistance across the signal range. (2) Break-Before-Make: When the address changes, the currently selected channel is disconnected before the new channel is connected. This prevents momentary shorting between two inputs, which could damage signal sources or corrupt data. (3) Enable: The EN input controls all channels simultaneously. When EN is low, all transmission gates are off, presenting a high impedance at the output. When EN is high, the addressed channel connects to the output. (4) LC2MOS Process: The enhanced LC2MOS (Low Capacitance CMOS) process minimizes parasitic capacitances, enabling fast switching and low charge injection. The low charge injection reduces output transients when switching between channels.

Pin Description: ADG408BRZ Pin Definition and Functions
Pin Name Function
1-8 S1-S8 Source inputs (8 channels)
9 D Drain output (common)
10 EN Enable (active high)
11 A0 Address bit 0
12 A1 Address bit 1
13 A2 Address bit 2
14 GND Ground
15 VDD Positive supply (+15V)
16 VSS Negative supply (-15V)
Application Scenarios: In which products and applications is ADG408BRZ used
  • Data acquisition system multi-channel signal selection with 100 Ohm mux
  • Audio/video signal routing and automatic test equipment switching
Alternative Models: What chips are recommended as replacements for ADG408BRZ
Manufacturer Part Number Package Notes
ADI ADG1408BCPZ LFCSP-16 4.5 Ohm, lower Ron
ADI ADG5408BRUZ TSSOP-16 13.5 Ohm, 8kV ESD
Maxim DG408DJZ SOIC-16 Original DG408, pin-compatible

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1