Opens in a new tab

ADM2484EBRWZ

Isolated RS-485 transceiver, 2.5kVrms, 20Mbps, half-duplex, tube pkg

4321

Effective Inventory

Image for reference only

Manufacturer Part:

ADM2484EBRWZ

Package:

SOIC-16W (10.3 x 7.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADM2484EBRWZ from Analog Devices is an isolated RS-485/RS-422 transceiver with 2.5kV rms galvanic isolation, identical to the REEL7 variant but in tube packaging. It provides reliable half-duplex communication up to 20Mbps in noisy industrial environments in SOIC-16W package.

Key Specifications

Protocol RS-485 / RS-422
Isolation Voltage 2500 V rms
Data Rate Up to 20 Mbps
Operation Mode Half-duplex
Common-Mode Voltage -7 V to +12 V
ESD Protection +/-15 kV HBM on bus pins
Packaging Tube
Package SOIC-16W (RW-16)
Operating Temperature -40 to +85 C

Features

  • 2.5kV rms galvanic isolation for ground loop prevention
  • Up to 20Mbps data rate for high-speed industrial networks
  • Full failsafe receiver for open, short, and idle bus conditions
  • +/-15kV HBM ESD protection on bus pins
  • Hot-swap input structure prevents glitching during plug-in

Applications

  • Isolated Modbus and Profibus fieldbus communication
  • Industrial PLC digital I/O modules
  • Motor drive communication interfaces
  • Building automation network nodes
Product Introduction: ADM2484EBRWZ Product Introduction

The ADM2484EBRWZ from Analog Devices is an isolated RS-485/RS-422 transceiver identical in electrical function to the ADM2484EBRWZ-REEL7, differing only in packaging format (tube instead of tape and reel). It integrates a three-channel iCoupler digital isolator with an RS-485 transceiver, providing 2.5kV rms galvanic isolation between the logic side and bus side. The half-duplex transceiver supports data rates up to 20Mbps with full failsafe receiver operation. This tube-packaged version is suitable for lower-volume production or prototyping where tape and reel handling is not required.

Working Principle: ADM2484EBRWZ Working Principle

The ADM2484EBRWZ operates identically to the REEL7 variant. (1) The iCoupler digital isolator transfers DI, DE, and RE logic signals across the 2.5kV rms isolation barrier using on-chip transformer coupling with CMOS encoding/decoding. (2) The RS-485 transceiver on the bus side converts single-ended logic to differential bus signals for transmission (A/B pins) and converts received differential signals back to single-ended logic on RO. (3) The driver enable (DE) and receiver enable (RE) control the direction for half-duplex operation, with full failsafe receiver ensuring logic-high output during bus idle, open, or short conditions.

Pin Description: ADM2484EBRWZ Pin Definition and Functions
Pin Name Function
1 VCC1 Logic-side supply
2 RO Receiver output
3 RE Receiver enable (active low)
4 DE Driver enable (active high)
5 DI Driver data input
6 GND1 Logic-side ground
9 GND2 Bus-side ground
10 A Non-inverting bus pin
11 B Inverting bus pin
12 VCC2 Bus-side supply (5V)
Application Scenarios: In which products and applications is ADM2484EBRWZ used
  • Isolated Modbus RTU fieldbus transceiver for industrial communication
  • Profibus DP network node with galvanic isolation
  • Motor drive serial communication interface
  • Building automation BACnet MS/TP isolated transceiver
Alternative Models: What chips are recommended as replacements for ADM2484EBRWZ
Model Manufacturer Key Difference
ADM2484EBRWZ-REEL7 Analog Devices Tape and reel packaging
ADM2483EBRWZ Analog Devices Full-duplex version
ADM2587EBRWZ Analog Devices Isolated with integrated DC-DC
ISO3086DW TI Isolated RS-485, 20Mbps
SIL9010 Silicon Labs Isolated RS-485, 1Mbps

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1