Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » ADM2582EBRWZ-REEL7

ADM2582EBRWZ-REEL7

16 Mbps isolated RS-485 transceiver with integrated isoPower DC-DC, 2.5 kV rms, 20-lead SOIC-W

5680

Effective Inventory

Image for reference only

Manufacturer Part:

ADM2582EBRWZ-REEL7

Package:

SOIC-20 Wide (12.9 x 7.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADM2582EBRWZ-REEL7 from Analog Devices is a fully integrated signal and power isolated RS-485/RS-422 transceiver with +/-15 kV ESD protection. It integrates a 3-channel isolator, differential line driver, differential receiver, and isoPower isolated DC-DC converter in a single 20-lead wide-body SOIC package. The device supports data rates up to 16 Mbps with 2500 V rms isolation.

Key Specifications

Data Rate 16 Mbps
Isolation Voltage 2500 V rms
Supply Voltage 3.3 V or 5 V
ESD Protection +/-15 kV on bus pins
Common-Mode Transient Immunity >25 kV/us
Max Bus Nodes 256
Configuration Full/Half Duplex
Operating Temperature -40°C to 85°C

Features

  • Fully integrated signal and power isolation, no external DC-DC needed
  • +/-15 kV ESD protection on RS-485 I/O pins
  • 16 Mbps data rate for high-speed communication
  • Compliant with ANSI/TIA/EIA-485-A-98 and ISO 8482
  • Supports up to 256 nodes on a single bus
  • Open- and short-circuit fail-safe receiver inputs
  • Thermal shutdown and current limiting protection
  • UL 1577 and VDE safety certifications

Applications

  • Isolated RS-485/RS-422 interfaces in industrial networks
  • Industrial field networks (Profibus, Modbus)
  • Multipoint data transmission systems
  • Building automation and HVAC controllers
Product Introduction: ADM2582EBRWZ-REEL7 Product Introduction

The ADM2582EBRWZ-REEL7 is a fully integrated signal and power isolated RS-485/RS-422 transceiver from Analog Devices. It combines a 3-channel iCoupler digital isolator, a three-state differential line driver, a differential input receiver, and an isoPower isolated DC-DC converter into a single 20-lead wide-body SOIC package. This integration eliminates the need for an external isolated DC-DC power supply, simplifying board design and reducing component count. The device operates from a single 3.3 V or 5 V supply on the logic side, with the isoPower converter generating the isolated bus-side supply internally. The transceiver supports data rates up to 16 Mbps for full-duplex operation, making it suitable for high-speed industrial communication protocols. The RS-485 bus pins feature +/-15 kV ESD protection, and the device includes fail-safe receiver inputs that guarantee a logic-high output when the bus is open or shorted.

Working Principle: ADM2582EBRWZ-REEL7 Working Principle

The ADM2582EBRWZ-REEL7 integrates four key subsystems: (1) The isoPower DC-DC converter uses high-frequency switching elements and an internal transformer to transfer power from the logic side (VCC) to the isolated bus side (VISOIN/VISOOUT), providing the isolated supply for the RS-485 transceiver without external components. (2) The iCoupler isolation barrier provides three channels of galvanic isolation – two for the driver data and enable signals, and one for the receiver data return – using chip-scale transformer technology with >25 kV/us CMTI. (3) The RS-485 driver section is a differential line driver with active-high enable, compliant with TIA/EIA-485-A, capable of driving up to 256 nodes on the bus. Current limiting and thermal shutdown protect against fault conditions. (4) The receiver section features a differential input with fail-safe biasing that ensures a logic-high output when the bus is undriven, shorted, or open-circuited.

Pin Description: ADM2582EBRWZ-REEL7 Pin Definition and Functions
Pin No. Pin Name Function
1 VCC Logic side supply (3.3 V or 5 V)
2 RxD Receiver data output
3 RE Receiver enable (active low)
4 DE Driver enable (active high)
5 TxD Driver data input
6-10 GND1 Logic side ground
11 GND2 Isolated bus side ground
12 Y Driver non-inverting output
13 Z Driver inverting output
14 B Receiver inverting input
15 A Receiver non-inverting input
16 VISOOUT Isolated supply output (for bus side)
17 VISOIN Isolated supply input
18-20 GND2/NC Isolated ground / Not connected
Application Scenarios: In which products and applications is ADM2582EBRWZ-REEL7 used
  • Industrial fieldbus networks (Profibus, Modbus RTU) requiring galvanic isolation between the controller and bus segments
  • Building automation systems with multi-drop RS-485 cabling needing integrated signal and power isolation
  • Motor drive communication interfaces where high CMTI prevents data corruption from switching noise
  • Medical equipment data acquisition where 2.5 kV isolation meets patient safety requirements
Alternative Models: What chips are recommended as replacements for ADM2582EBRWZ-REEL7
Model Brand Data Rate Isolation Integrated Power
ADM2587EBRWZ-REEL7 ADI 500 kbps 2500 V rms Yes
ADM2682EBRIZ ADI 16 Mbps 2500 V rms Yes
ISL3179EIBZ Renesas 20 Mbps None No
THVD1550DR TI 50 Mbps None No
SI8631BD-B-IS Skyworks 150 Mbps 5000 V rms No

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1