Opens in a new tab

ADM7170ACPZ-3.3-R7

500mA CMOS LDO, 3.3V fixed, 5uVrms noise, 42mV dropout

10300

Effective Inventory

Image for reference only

Manufacturer Part:

ADM7170ACPZ-3.3-R7

Package:

LFCSP-8 (3.0 x 3.0 x 0.73 mm, w/ EP)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

ADM7170ACPZ-3.3-R7 Overview

The ADM7170ACPZ-3.3-R7 is a 500mA ultralow noise, high PSRR LDO regulator from Analog Devices with fixed 3.3V output, 94dB PSRR at 1kHz, only 3.8uV RMS output noise, in an LFCSP-8 package, suitable for FPGA and RF front-end power supply.

Key Features

  • Fixed output voltage: 3.3V
  • Output current: 500mA
  • Dropout: 200mV at 500mA
  • PSRR: 94dB at 1kHz
  • Output noise: 3.8uV RMS
  • Supply voltage: 2.3V-6.5V
Product Introduction: ADM7170ACPZ-3.3-R7 Product Introduction

The ADM7170ACPZ-3.3-R7 is a 500 mA, ultralow noise CMOS LDO from Analog Devices with a fixed 3.3 V output and an input range of 2.3 V to 6.5 V. It delivers 5 uVrms output noise (100 Hz to 100 kHz), 60 dB PSRR at 100 kHz, and an ultra-fast 1.5 us transient response. The 42 mV dropout voltage at full load enables efficient regulation from a 3.6 V Li-ion cell or 5 V rail. Housed in a 3 mm x 3 mm LFCSP-8, it requires only a 4.7 uF ceramic output capacitor for stable operation.

Working Principle: ADM7170ACPZ-3.3-R7 Working Principle

The ADM7170ACPZ-3.3-R7 utilizes a PMOS pass transistor with a high-gain, wide-bandwidth error amplifier to maintain output regulation. The amplifier compares the sensed output voltage (through the SENSE pin) with an internal bandgap reference trimmed to 3.3 V. Any deviation drives the PMOS gate to correct the output within 1.5 us for large load steps. The CMOS process ensures ground current remains at 0.7 mA (no-load) independent of output current. An internal soft-start circuit limits inrush current during power-up. The precision enable circuit features a 1.2 V threshold with 40 mV hysteresis, enabling deterministic power sequencing in multi-rail systems. Overcurrent protection folds back the output current, and thermal shutdown activates at approximately 150 degrees C junction temperature.

Pin Description: ADM7170ACPZ-3.3-R7 Pin Definition and Functions
Pin Name Description
1 VOUT Regulated 3.3 V output; connect 4.7 uF ceramic capacitor to GND
2 VOUT Regulated output (duplicate for current capacity)
3 SENSE Output voltage sense feedback; connect to load point
4 SS Soft-start control; connect capacitor to GND for programmable ramp time
5 EN Enable input; precision 1.2 V threshold for supply sequencing
6 GND Ground reference
7 VIN Input supply (2.3 V to 6.5 V)
8 VIN Input supply (duplicate)
EP GND Exposed thermal pad; solder to PCB ground plane
Application Scenarios: In which products and applications is ADM7170ACPZ-3.3-R7 used
  • 3.3 V Analog Rail: Clean supply for op-amps, comparators, and precision analog signal chains
  • RF Front-End Supply: Low-noise power for LNA and mixer stages in wireless receivers
  • PLL/VCO Power: Ultra-low-noise rail for frequency synthesizers to minimize phase noise
  • Portable Instrumentation: Battery-powered test equipment with demanding noise floor requirements
  • Sensor Signal Conditioning: Low-noise bridge sensor excitation and ADC reference supply
Alternative Models: What chips are recommended as replacements for ADM7170ACPZ-3.3-R7
Model Manufacturer Vout Iout Noise Package
ADM7170ACPZ-1.8-R7 Analog Devices 1.8 V 500 mA 5 uVrms LFCSP-8
TPS7A4701 Texas Instruments Adj 1 A 4 uVrms VSON-10
LT3045 Analog Devices Adj 500 mA 0.8 uVrms DFN-12
NCP511 onsemi 3.3 V 300 mA 8 uVrms DFN-6
MAX38912 Maxim 3.3 V 500 mA 7 uVrms WLP-6

ADM7170ACPZ-3.3V-R7 is a 500mA ultralow noise CMOS LDO from Analog Devices with 5µVrms noise, 60dB PSRR at 100kHz, and 1.5µs fast transient response in 3x3mm LFCSP-8. The family includes 1.8V, 3.3V, and 5.0V fixed-output variants with identical performance. For higher current, ADM7150 provides 800mA with 1.0µVrms noise. For adjustable output, ADM7170ACPZ offers programmable voltage. The TPS7A7001 from TI is a competitive 1A low-noise LDO alternative.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1