Product Overview
The ADP3338AKCZ-3.3-R7 from Analog Devices is a 1A anyCAP LDO regulator with 3.3V output, 190mV dropout, and stability with any output cap in SOT-223.
Key Specifications
| Output Voltage | 3.3V fixed |
| Output Current | 1A |
| Dropout Voltage | 190 mV max @ 1A |
| Input Voltage | 2.7V to 8V |
| Accuracy | +/-1.1% over line, load, temp |
| PSRR | 70 dB @ 10kHz |
| IQ | 3 mA typical |
| Output Cap | Any type, 0.01uF minimum |
| Package | SOT-223 |
| Operating Temperature | -40 to +85 C |
Features
- anyCAP stability with any type/capacitance output cap
- 190mV low dropout at 1A
- 70dB PSRR
- Current and thermal limiting
- Post-regulation after switching supply
- Battery-powered instrumentation
- Critical 3.3V rail regulation
- ADC/DAC reference supply
- Post-SMPS Clean Regulation: Cascading after a 5 V switching regulator to deliver an ultra-clean 3.3 V rail with 70 dB PSRR for noise-sensitive ADC and DAC reference circuits
- Precision 3.3 V Rails: +/-1.1% output accuracy over all input voltage and load conditions makes it ideal for powering precision analog front-ends and voltage references
- Battery-Powered Instrumentation: 75 uA ground current and anyCAP stability allow operation directly from single Li-ion cell (3.6 V to 3.0 V) with just a 1 uF ceramic output capacitor
- ADC/DAC Reference Supply: Low output noise and high PSRR provide a stable 3.3 V reference for 16-bit and 24-bit data converters in medical and industrial measurement
- Portable Communication Devices: Shutdown pin reduces current to 1 nA for extended battery life in Bluetooth and Wi-Fi module power management
Applications
Product Introduction: ADP3338AKCZ-3.3-R7 Product Introduction
The ADP3338AKCZ-3.3-R7 from Analog Devices is a 1A low-dropout regulator with 3.3V fixed output in SOT-223. The anyCAP architecture provides unconditional stability with any type of output capacitor (ceramic, tantalum, aluminum) and any capacitance value above 0.01uF. The +/-1.1% output accuracy is guaranteed over line, load, and temperature variations. The 190mV dropout at 1A enables efficient 5V-to-3.3V conversion. The 70dB PSRR makes it excellent for post-regulation after switching converters.
Working Principle: ADP3338AKCZ-3.3-R7 Working Principle
The ADP3338AKCZ-3.3-R7 operates as a 1A anyCAP LDO regulator. (1) The anyCAP architecture uses an enhanced single-pole compensation scheme that makes the regulator unconditionally stable regardless of output capacitor type (ESR), value, or placement. This eliminates the stability constraints common to many LDOs that require specific ESR ranges. (2) The +/-1.1% output accuracy is maintained across the full input voltage range (2.7-8V), load current range (0-1A), and temperature range (-40 to +85C). This precision makes the output suitable as a reference supply for ADCs and DACs. (3) The PNP pass transistor provides the low 190mV dropout characteristic. The error amplifier and bandgap reference are designed for low noise and high PSRR. Internal current limiting (1.5A typical) and thermal shutdown (165C) protect the device during fault conditions. The shutdown pin reduces supply current to 2uA when pulled low.
Pin Description: ADP3338AKCZ-3.3-R7 Pin Definition and Functions
| Pin | Name | Description |
|---|---|---|
| 1 | IN | Unregulated input voltage (3.3 V to 12 V); anyCAP stable with any type and value of output capacitor |
| 2 | GND | Ground; connect to PCB copper pour for thermal dissipation |
| 3 | OUT | Regulated 3.3 V output at 300 mA; +/-1.1% accuracy over line, load, and temperature |
Package: SOT-223-3. Dropout voltage: 190 mV at 300 mA. Quiescent current: 75 uA typical with 1 nA in shutdown. PSRR: 70 dB at 1 kHz.
Application Scenarios: In which products and applications is ADP3338AKCZ-3.3-R7 used
Alternative Models: What chips are recommended as replacements for ADP3338AKCZ-3.3-R7
| Model | Manufacturer | Key Difference | Package | Output |
|---|---|---|---|---|
| ADP3338AKCZ-5.0-R7 | ADI | 5.0V output version for 5V logic systems with same anyCAP stability and 300mA rating | SOT-223-3 | 5.0V fixed |
| ADP3339AKCZ-3.3-R7 | ADI | 1.5A higher-current version for heavier load applications requiring more output current | SOT-223-3 | 3.3V/1.5A |
| TLV1117LV33DCYR | TI | Equivalent 3.3V/1A LDO with 300mV dropout at 1A and 500uA quiescent current | SOT-223-3 | 3.3V fixed |
| MCP1826T-3302E/DC | Microchip | 3.3V/1A LDO with 210mV dropout and 0.35%/V line regulation, anyCAP stable | SOT-223-3 | 3.3V fixed |
| NCV8164ASN330T1G | onsemi | Automotive AEC-Q100 300mA LDO with 70dB PSRR and 1.8V to 5.5V input range | TSNP-4 | 3.3V fixed |
The ADP3338AKCZ-3.3-R7 is a 300mA anyCAP LDO with +/-1.1% output accuracy over line, load, and temperature. anyCAP technology ensures stability with any type and value of output capacitor. For higher current needs, ADP3339 offers 1.5A output in the same SOT-223-3 package.
Recommend Parts

RK73H1ETTP20R0F
20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm
IN STOCK: 33180pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS61021ADSGR
3A synchronous boost converter, 1.8-5.5V, VSSOP-8
Brand: TI
Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)
IN STOCK: 12398pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

ADUM5000ARWZ-RL
500mW isolated DC-DC converter, 3.3/5V, SOIC-16W
Brand: ADI
Package: SOIC-16W (10.3 x 7.5 mm, RW package)
IN STOCK: 6373pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 9357pcs
Cargo cycle: 3-7 Days
The minimum order is 1






