Opens in a new tab

ADUM141E0BRWZ

Quad digital isolator, iCoupler, 5kV RMS, 150Mbps, 14ns delay, SOIC-16W

5890

Effective Inventory

Image for reference only

Manufacturer Part:

ADUM141E0BRWZ

Package:

SOIC-16W (10.3 x 7.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADUM141E0BRWZ is a quad-channel digital isolator from Analog Devices using iCoupler technology with 5 kV RMS isolation, 150 Mbps data rate, and 1.2 mA per channel quiescent current in a 16-pin SOIC-W package.

Key Specifications

Isolation Channels 4 (unidirectional)
Isolation Voltage 5 kV RMS (1 minute)
Data Rate Up to 150 Mbps
Propagation Delay 14 ns typical
Pulse Width Distortion 2 ns max
Supply Voltage 2.375 V to 5.5 V (both sides)
Quiescent Current 1.2 mA per channel (typical)
Common-Mode Transient Immunity > 75 kV/µs
Operating Temperature -40°C to +125°C
Package SOIC-16W (wide)

Features

  • iCoupler technology with chip-scale transformers
  • 5 kV RMS isolation rating (UL 1577)
  • 150 Mbps data rate with 14 ns propagation delay
  • Wide supply range: 2.375V to 5.5V (both sides)
  • Very low power: 1.2 mA per channel at 5V
  • High common-mode transient immunity: >75 kV/µs
  • Glitch-free power-up and power-down
  • No external EMI shielding required

Applications

  • Industrial communication isolation
  • Medical equipment isolation
  • Power supply feedback loops
  • SPI/I2C bus isolation
  • Motor drive isolation barriers
Product Introduction: ADUM141E0BRWZ Product Introduction

The ADUM141E0BRWZ is a quad-channel digital isolator from Analog Devices based on iCoupler technology that uses chip-scale microtransformers for galvanic isolation up to 5 kV RMS. It provides four unidirectional isolation channels with 150 Mbps data rate, 14 ns typical propagation delay, and 2 ns maximum pulse width distortion. Both sides operate independently from 2.375V to 5.5V, enabling voltage level translation across the isolation barrier. The device achieves very low power consumption of 1.2 mA per channel at 5V and provides common-mode transient immunity exceeding 75 kV/µs. Unlike optocouplers, iCoupler devices do not degrade over time and require no external drivers or EMI shielding.

Working Principle: ADUM141E0BRWZ Working Principle

The ADUM141E uses Analog Devices iCoupler technology which integrates microscale pulse transformers fabricated directly on the semiconductor die. Data transmission across the isolation barrier uses edge-based encoding: a rising edge on the input generates a pair of short pulses that are transmitted through the transformer and decoded on the output side. A falling edge generates a different pulse pattern. A refresh circuit periodically transmits the input state to ensure output correctness even when no signal transitions occur. The transformer isolation provides galvanic isolation rated at 5 kV RMS per UL 1577, with breakdown voltage exceeding 7.5 kV peak. The high common-mode transient immunity (greater than 75 kV per microsecond) results from the differential detection scheme that rejects common-mode signals. Both sides have independent voltage regulators and supply monitoring, ensuring glitch-free operation during power-up and power-down sequences.

Pin Description: ADUM141E0BRWZ Pin Definition and Functions
Pin Name Type Description
1 VDD1 Power Side 1 supply (2.375-5.5V)
2 VIA Input Channel A input (side 1)
3 VIB Input Channel B input (side 1)
4 VIC Input Channel C input (side 1)
5 VID Input Channel D input (side 1)
6 GND1 Power Side 1 ground
7-8 NC – No connect (isolation gap)
9-10 NC – No connect (isolation gap)
11 GND2 Power Side 2 ground
12 VOA Output Channel A output (side 2)
13 VOB Output Channel B output (side 2)
14 VOC Output Channel C output (side 2)
15 VOD Output Channel D output (side 2)
16 VDD2 Power Side 2 supply (2.375-5.5V)
Application Scenarios: In which products and applications is ADUM141E0BRWZ used
  • Industrial Communication: 5 kV isolation protects controllers from high-voltage transients in factory automation and process control
  • Medical Equipment: Galvanic isolation meets patient safety requirements in medical device interfaces
  • SPI Bus Isolation: 150 Mbps supports high-speed SPI communication across isolation barriers in ADC/DAC applications
  • Motor Drive Isolation: Greater than 75 kV/µs common-mode rejection maintains signal integrity through motor drive switching transients
  • Power Supply Feedback: Wide 2.375-5.5V operation on both sides enables level translation between 3.3V logic and 5V control
Alternative Models: What chips are recommended as replacements for ADUM141E0BRWZ
Model Manufacturer Key Difference Package Specs
ADUM141E1BRWZ ADI Same with default output HIGH – –
ADUM141E2BRWZ ADI Same with bidirectional channels – –
ISO7741DWR TI Quad isolator, 5kV, 100Mbps, SOIC-16W – –
SIO8621BDW Silicon Labs Quad isolator, 5kV, 150Mbps, SOIC-16W – –
CBM140D16S Chipanalog Quad isolator, 5kV, 150Mbps, SOIC-16 – –

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1