Opens in a new tab

ADUM2402ARWZ-RL

Quad digital isolator, 2.5kVrms, 2-fwd/2-rev, 90Mbps, SOIC-16W

5432

Effective Inventory

Image for reference only

Manufacturer Part:

ADUM2402ARWZ-RL

Package:

SOIC-16W (10.3 x 7.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADUM2402ARWZ-RL from Analog Devices is a quad-channel iCoupler digital isolator with 2 forward and 2 reverse channels, supporting DC to 90Mbps data rate with 2.5kV rms isolation in SOIC-16W package. With 2ns max pulse width distortion and over 25kV/us CMTI, it provides precise timing isolation for bidirectional signal buses.

Key Specifications

Channels 4 (2 forward, 2 reverse)
Isolation Voltage 2500 V rms
Data Rate DC to 90 Mbps
Propagation Delay 32 ns typical
Pulse Width Distortion 2 ns max (CRWZ grade)
Channel Matching 2 ns max
CMTI >25 kV/us
Supply Voltage 2.7 V to 5.5 V (each side)
Package SOIC-16W (RW-16)
Operating Temperature -40 to +105 C

Features

  • 2 forward + 2 reverse channels ideal for bidirectional buses like I2C and SPI
  • 90Mbps data rate supports high-speed digital interfaces
  • 2ns max pulse width distortion and channel matching for precise timing
  • 3V/5V level translation across the isolation barrier
  • Low power: 1mA per channel at 5V, 0Mbps
  • Output enable function for output control

Applications

  • Isolated I2C bus with bidirectional SDA and SCL
  • Isolated SPI with MISO reverse channels
  • Motor drive isolation for encoder feedback
  • Medical equipment multichannel isolation
  • Power supply feedback loop isolation
Product Introduction: ADUM2402ARWZ-RL Product Introduction

The ADUM2402ARWZ-RL from Analog Devices is a quad-channel digital isolator based on iCoupler magnetic isolation technology. With two forward and two reverse channels, it is ideal for isolating bidirectional communication interfaces such as I2C (SDA and SCL both bidirectional) or SPI with dual MISO lines. The device supports data rates from DC to 90Mbps with only 2ns maximum pulse width distortion and 2ns maximum channel-to-channel matching. Both sides operate from 2.7V to 5.5V, enabling level translation between different voltage domains. The RL suffix indicates tape and reel packaging.

Working Principle: ADUM2402ARWZ-RL Working Principle

The ADUM2402ARWZ-RL operates using Analog Devices iCoupler magnetic isolation technology. (1) Each channel consists of a CMOS encoder on the input side that converts the digital signal into high-frequency pulses driving on-chip planar transformer windings. The magnetic coupling transfers the signal across the isolation barrier, where a CMOS decoder reconstructs the digital signal. (2) The two forward channels (VIA->VOA, VIB->VOB) carry signals from side 1 to side 2, while the two reverse channels (VIC->VOC, VID->VOD) carry signals from side 2 to side 1, enabling full bidirectional communication. (3) The patented refresh circuit continuously pulses the transformers to maintain correct output state during static input conditions, and the >25kV/us CMTI prevents false switching during common-mode transients.

Pin Description: ADUM2402ARWZ-RL Pin Definition and Functions
Pin Name Function
1 VDD1 Side 1 supply (2.7-5.5V)
2 VIA Channel A input (forward)
3 VIB Channel B input (forward)
4 VOC Channel C output (reverse)
5 VOD Channel D output (reverse)
6 GND1 Side 1 ground
7-8 NC No connect
9 GND2 Side 2 ground
10 VOA Channel A output (forward)
11 VOB Channel B output (forward)
12 VIC Channel C input (reverse)
13 VID Channel D input (reverse)
14 VDD2 Side 2 supply (2.7-5.5V)
15-16 NC No connect
Application Scenarios: In which products and applications is ADUM2402ARWZ-RL used
  • Isolated I2C bus with bidirectional SDA and SCL channels
  • Isolated SPI interface with MISO and additional reverse signal
  • Motor drive encoder feedback isolation with bidirectional data
  • Medical equipment multichannel patient isolation barrier
  • Switch-mode power supply digital control loop isolation
Alternative Models: What chips are recommended as replacements for ADUM2402ARWZ-RL
Model Manufacturer Key Difference
ADUM2401ARWZ-RL Analog Devices 4 forward channels
ADUM2400ARWZ-RL Analog Devices 3 forward + 1 reverse
ADUM2402CRWZ-RL Analog Devices Enhanced creepage package
SI8642BC-B-IS Silicon Labs 4-ch, 150Mbps, narrow SOIC
ISO7742FDWR TI 100Mbps, 5kVrms, newer gen

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1