Opens in a new tab

ADW1212HLW

12V-12V 2W isolated DC-DC, 3000VDC isolation, SIP-4, regulated, short circuit protection

10694

Effective Inventory

Image for reference only

Manufacturer Part:

ADW1212HLW

Package:

SIP-4 (12.50 x 8.50 x 7.50 mm, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADW1212HLW is a 12VDC input, 12VDC output, 2W isolated DC-DC converter in a SIP-4 package. With 3000VDC isolation and regulated output, it provides reliable signal and power isolation for industrial control and communication systems.

Key Specifications

Input Voltage 12 VDC (10.8-13.2V range)
Output Voltage 12 VDC (regulated)
Output Power 2 W
Output Current 167 mA
Isolation Voltage 3000 VDC
Efficiency 80% (typical)
Operating Temperature -40C to +85C

Features

  • 12VDC to 12VDC 2W isolated conversion with regulated output
  • 3000VDC isolation for safety and noise isolation
  • SIP-4 compact through-hole package with 7.5mm height
  • 80% typical efficiency for low thermal dissipation
  • Continuous short-circuit protection with auto-recovery
  • No minimum load requirement for stable operation

Applications

  • Industrial PLC I/O module signal isolation
  • RS-485/CAN transceiver isolated power supply
  • Medical equipment isolation barrier power
  • Data acquisition channel-to-channel isolation
Product Introduction: ADW1212HLW Product Introduction

The ADW1212HLW is a 2W isolated DC-DC converter providing 12VDC to 12VDC conversion with 3000VDC galvanic isolation in a compact SIP-4 through-hole package. The device belongs to the ADW series of 2W single-output converters designed for signal and power isolation in industrial control, communication, and medical equipment. The regulated 12VDC output maintains +/-3% regulation over the full input voltage range and from no load to full load, ensuring stable power for isolated circuitry. The 3000VDC isolation rating provides safety-rated isolation between input and output, meeting the requirements of most industrial and medical isolation standards. The 80% typical efficiency minimizes thermal dissipation, allowing reliable operation without heatsinking in most applications. Continuous short-circuit protection with automatic recovery prevents damage from output fault conditions. The SIP-4 package with only 4 pins (Vin+, Vin-, Vout+, Vout-) provides the simplest possible PCB layout for isolated power, and the 7.5mm height profile fits in most card rack systems. The device operates reliably over the -40C to +85C temperature range without derating.

Working Principle: ADW1212HLW Working Principle

The ADW1212HLW uses a flyback converter topology with transformer isolation. (1) Isolation: The primary and secondary sides are galvanically isolated by the transformer, which provides the 3000VDC isolation barrier. No electrical connection exists between input and output, preventing ground loops and providing safety isolation. (2) Flyback Conversion: On the primary side, a MOSFET switch chops the DC input into AC, driving the transformer primary winding. Energy is stored in the transformer core during the on-time and released to the secondary during the off-time. (3) Rectification and Regulation: The secondary AC output is rectified and filtered to produce the DC output. A feedback loop (typically optocoupler-based for isolation) monitors the output voltage and adjusts the primary-side switch duty cycle to maintain regulation at 12VDC. (4) Protection: The output current is monitored. If it exceeds the limit (short circuit), the switching duty cycle is reduced or the converter enters hiccup mode. When the fault is removed, the converter automatically recovers.

Pin Description: ADW1212HLW Pin Definition and Functions
Pin Name Type Function
1 VIN+ Power Input positive (12VDC)
2 VIN- Power Input negative (ground)
3 VOUT+ Output Output positive (12VDC)
4 VOUT- Output Output negative (ground)
Application Scenarios: In which products and applications is ADW1212HLW used
  • Industrial PLC I/O module signal isolation with 3000VDC barrier
  • RS-485/CAN transceiver isolated power supply at 2W/167mA
  • Medical equipment isolation barrier power with regulated output
  • Data acquisition channel-to-channel isolation in SIP-4 package
Alternative Models: What chips are recommended as replacements for ADW1212HLW
Manufacturer Part Number Package Notes
Murata MEV1S1212SC SIP-4 1W, 12V-12V, unregulated
CUI Inc PV1S1212-S SIP-4 1W, 12V-12V
TRACO TMR 1-1212 SIP-4 1W, 12V-12V, regulated
TI ISOW7841DWVR SOIC-16 Isolated DC-DC + data, 0.5W

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1