Opens in a new tab

ADXL345BCCZ

3-axis digital accelerometer, ±16g, 13-bit, SPI/I2C, LGA-14

10926

Effective Inventory

Image for reference only

Manufacturer Part:

ADXL345BCCZ

Package:

LGA-14 (5 x 3 x 1 mm, 0.8mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADXL345BCCZ from Analog Devices is a 3-axis digital MEMS accelerometer in a 14-lead LGA (5 x 3 x 1mm) package. It measures acceleration up to ±16g with 13-bit (4mg/LSB) resolution, supporting user-selectable ranges (±2g/±4g/±8g/±16g). Featuring SPI and I2C digital interfaces, ultra-low 23µA measurement current, 32-level FIFO buffer, and built-in activity/inactivity, tap, and free-fall detection with flexible interrupt mapping, it operates from 2.0V to 3.6V and withstands 10,000g shock.

Key Specifications

Sensor Type 3-Axis Digital MEMS Accelerometer
Measurement Range ±2g / ±4g / ±8g / ±16g (selectable)
Resolution Up to 13-bit (4 mg/LSB in full-resolution mode)
Sensitivity (±2g) 256 LSB/g (typical)
Output Data Format 16-bit twos complement
Interface SPI (3-wire / 4-wire) and I2C
Supply Voltage (VS) 2.0V to 3.6V
I/O Voltage (VDD I/O) 1.7V to VS
Supply Current (measurement) 23 µA (typical, VS = 2.5V)
Supply Current (standby) 0.1 µA (typical)
Supply Current (ODR ≥ 100Hz) 140 µA (typical)
FIFO Buffer 32-level
Bandwidth 0.1 Hz to 3200 Hz (selectable via serial command)
Shock Survival 10,000 g
Operating Temperature -40°C to +85°C
Package LGA-14 (5 x 3 x 1 mm)

Features

  • 3-axis digital accelerometer with ±2g to ±16g selectable range
  • 13-bit resolution at ±16g (4mg/LSB in full-resolution mode)
  • Ultra-low power: 23µA measurement, 0.1µA standby
  • Power consumption scales automatically with bandwidth
  • SPI (3-wire and 4-wire) and I2C digital interfaces
  • 32-level FIFO buffer minimizes host processor load
  • Activity/inactivity detection with programmable thresholds
  • Single-tap and double-tap detection on any axis
  • Free-fall detection
  • Flexible interrupt mapping to two interrupt output pins
  • 10,000g shock survival rating

Applications

  • Mobile phone screen orientation and motion sensing
  • Gaming controllers and pointing devices
  • Hard disk drive (HDD) free-fall protection
  • Personal navigation device tilt compensation
  • Medical instrument activity monitoring
Product Introduction: ADXL345BCCZ Product Introduction

The ADXL345BCCZ from Analog Devices is a 3-axis digital MEMS accelerometer in a tiny 5x3x1mm LGA-14 package. Measuring up to ±16g with 13-bit (4mg/LSB) resolution, it supports user-selectable ranges, SPI and I2C interfaces, and ultra-low 23µA measurement current. Built-in 32-level FIFO, activity/inactivity detection, tap sensing, and free-fall detection with flexible interrupt mapping minimize host processor load. Operating from 2.0V to 3.6V with 10,000g shock survival, it is ideal for mobile devices, gaming, HDD protection, and medical instruments.

Working Principle: ADXL345BCCZ Working Principle

The ADXL345BCCZ uses a polysilicon surface-micromachined MEMS sensor structure built on top of a CMOS signal conditioning ASIC. Each axis has a differential capacitor structure where a proof mass suspended by polysilicon springs moves relative to fixed plates under acceleration. This displacement changes the differential capacitance, which is measured by the on-chip synchronous demodulator circuit. The demodulated signal is amplified, digitized by a 13-bit ADC, and corrected using factory-calibrated offset and sensitivity coefficients stored in on-chip non-volatile memory. In full-resolution mode, the 4mg/LSB scale factor is maintained across all g-range settings, with resolution increasing from 10 bits at ±2g to 13 bits at ±16g. The digital output is formatted as 16-bit twos complement and accessed via SPI or I2C. The 32-level FIFO can buffer up to 32 x 3-axis samples, reducing host polling frequency and system power consumption. The embedded motion detection engines compare acceleration magnitudes against programmable thresholds to generate activity/inactivity, tap, and free-fall interrupts without host processor intervention.

Pin Description: ADXL345BCCZ Pin Definition and Functions
Pin Name Type Function
1 VDD I/O Power Digital I/O supply voltage (1.7V to VS)
2 GND Power Ground
3 RES — Reserved (connect to GND or leave floating)
4 GND Power Ground
5 GND Power Ground
6 VS Power Analog supply voltage (2.0V to 3.6V)
7 CS# Input SPI Chip Select (active low); tie HIGH for I2C mode
8 INT1 Output Interrupt 1 output (programmable function mapping)
9 INT2 Output Interrupt 2 output (programmable function mapping)
10 NC — No connect
11 SDO/ALT Output/Input SPI Data Out / I2C Address Select (ALT address bit)
12 SDA/SDI/SDIO I/O I2C Data / SPI Data In / SPI 3-wire Data
13 SCL/SCLK Input I2C Clock / SPI Clock
14 GND Power Ground
Application Scenarios: In which products and applications is ADXL345BCCZ used
  • Mobile phone screen orientation and motion-activated UI
  • Gaming controller tilt, shake, and gesture recognition
  • Hard disk drive (HDD) free-fall detection and head parking
  • Personal navigation device tilt compensation for dead reckoning
  • Medical instrument patient activity and fall detection monitoring
Alternative Models: What chips are recommended as replacements for ADXL345BCCZ
Manufacturer Part Number Package Notes
Analog Devices ADXL345BCCZ-RL LGA-14 Tape and reel packaging
Analog Devices ADXL362BCCZ-RL7 LGA-16 Ultra-low power (270nA), built-in ADC
STMicroelectronics LIS3DHTR LGA-16 3-axis, ±16g, similar features, lower cost
Bosch BMA280 LGA-12 ±16g, SPI/I2C, similar resolution
NXP MMA8452QR1 QFN-16 ±8g, 12-bit, embedded functions

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1