Opens in a new tab

ADXL345BCCZ

3-axis 16-bit digital accelerometer, +/-16g, 40uA, SPI/I2C, LGA-14

7069

Effective Inventory

Image for reference only

Manufacturer Part:

ADXL345BCCZ

Package:

LGA-14 (3x5x1mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADXL345BCCZ from Analog Devices is a 3-axis digital accelerometer with 16-bit resolution and programmable measurement ranges up to +/-16g. It features ultra-low power (40uA in measurement mode) and communicates via SPI or I2C, packaged in a 14-lead LGA (3x5x1mm).

Key Specifications

Axes 3 (X, Y, Z)
Range +/-2g, +/-4g, +/-8g, +/-16g (programmable)
Resolution 16-bit (13-bit in +/-16g mode)
Interface SPI (5MHz) + I2C (400kHz)
Supply Voltage 2.0V to 3.6V
Current (measurement) 40uA (typ at 100Hz ODR)
Current (standby) 0.1uA
Built-in Functions Activity/inactivity, tap, free-fall
Package LGA-14 (3x5x1mm)
Operating Temperature -40 to +85 C

Features

  • 3-axis accelerometer with 16-bit resolution
  • Ultra-low power: 40uA at 100Hz ODR
  • Dual interface: SPI and I2C
  • 32-level FIFO buffer
  • Built-in motion detection: tap, activity, free-fall
  • Interrupt mapping to INT1 or INT2 pins

Applications

  • Mobile device screen orientation
  • Gaming and virtual reality
  • Hard drive free-fall protection
  • Medical and sports instrumentation
Product Introduction: ADXL345BCCZ Product Introduction

The ADXL345BCCZ from Analog Devices is a small, thin, low-power 3-axis accelerometer with high-resolution (16-bit) measurement at up to +/-16g. Digital output data is formatted as 16-bit twos complement and is accessible through SPI or I2C digital interfaces. The ADXL345 is well-suited for mobile device applications, measuring static acceleration of gravity in tilt-sensing applications as well as dynamic acceleration resulting from motion or shock. Its high resolution enables measurement of inclination changes less than 1.0 degree. Built-in motion detection features include activity/inactivity sensing, tap/double-tap detection, and free-fall detection, all of which can be mapped to either of two interrupt pins.

Working Principle: ADXL345BCCZ Working Principle

The ADXL345 uses a polysilicon surface-micromachined sensor structure built on top of a silicon wafer. The sensor structure consists of a proof mass suspended by polysilicon springs. Acceleration causes the proof mass to deflect, changing the capacitance between the proof mass and fixed electrodes. The change in capacitance is measured by an on-chip ASIC that converts it to a proportional voltage, digitized by a 16-bit ADC. The digital filter provides bandwidth selection from 0.1Hz to 1600Hz. The built-in FIFO stores up to 32 samples, reducing host processor interrupt overhead. The activity/inactivity, tap, and free-fall detection functions are computed by comparing acceleration data against programmable thresholds.

Pin Description: ADXL345BCCZ Pin Definition and Functions
Pin Name Function
1 VDD I/O Digital I/O supply voltage
2 GND Ground
3 RES Reserved (connect to VS or GND)
4 INT1 Interrupt 1 output
5 INT2 Interrupt 2 output
6 NC Not connected
7 CS SPI chip select / I2C address select
8 SDO/ALT SPI data out / I2C address select
9 SDA/SDI I2C data / SPI data in
10 SCL/SCLK I2C clock / SPI clock
11-12 GND Ground
13 VS Analog supply voltage (2.0-3.6V)
14 NC Not connected
Application Scenarios: In which products and applications is ADXL345BCCZ used
  • Mobile phone screen orientation detection with ultra-low 40uA current
  • Hard drive free-fall protection with built-in detection algorithm
  • Wearable sports and fitness devices with tap detection for user interface
  • Gaming controllers with 16-bit resolution for precise motion tracking
Alternative Models: What chips are recommended as replacements for ADXL345BCCZ
Model Manufacturer Key Difference
ADXL362 ADI Ultra-low power (300nA), 12-bit
LIS3DH ST Lower cost, 12-bit, very popular
BMA250 Bosch 10-bit, lower power
MMA8452Q NXP 12-bit, 800Hz ODR

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1