Opens in a new tab

AL8807MP-13

6-36V buck LED driver, 1A, 1MHz, internal MOSFET, MSOP-8EP package for low-power LED lighting (Obsolete)

5109

Effective Inventory

Image for reference only

Manufacturer Part:

AL8807MP-13

Package:

8-MSOP-EP (3.00mm width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AL8807MP-13 is a Diodes Incorporated buck LED driver IC designed for high-efficiency LED driving from 6V to 36V input. With an internal switch rated at 1A and 1 MHz switching frequency in an MSOP-8 package, it provides a compact solution for low-power LED lighting applications.

Key Specifications

Input Voltage 6V to 36V
Output Current Up to 1A (switch)
Switching Frequency 1 MHz
Dimming Control PWM/DC via CTRL pin
Efficiency Up to 96%
LED Current Accuracy Better than 5%
Operating Temperature -40°C to +125°C
Package 8-MSOP-EP (3.00mm width)
Product Status Obsolete (replaced by AL8860MP-13)

Features

  • Internal NDMOS switch eliminates external MOSFET requirement
  • 1 MHz switching frequency enables small inductor and capacitor values
  • PWM/DC dimming via CTRL pin with analog voltage control
  • Up to 96% conversion efficiency for battery-powered lighting
  • Open LED protection and thermal shutdown for reliability
  • Compact MSOP-8 package for space-constrained LED designs

Applications

  • MR16 and other low-voltage LED lamp drivers
  • LED strip and backlight driver circuits
  • Automotive interior LED lighting
  • Battery-powered portable LED lighting
  • Signage and display LED driver
Product Introduction: AL8807MP-13 Product Introduction

The AL8807MP-13 is a Diodes Incorporated continuous-mode buck LED driver IC operating from 6V to 36V input with an integrated NDMOS switch capable of driving up to 1A LED current. The 1 MHz fixed switching frequency minimizes external component size, while the CTRL pin provides analog PWM dimming control. Packaged in a compact MSOP-8 surface-mount format with exposed pad, it delivers up to 96% efficiency for MR16 LED lamps, LED strip drivers, automotive interior lighting, and battery-powered portable LED applications. Note: This product is obsolete; recommended replacement is AL8860MP-13.

Working Principle: AL8807MP-13 Working Principle

The AL8807MP-13 operates as a hysteretic buck converter for LED current regulation. When the internal NDMOS switch turns on, current flows through the inductor and LED string, ramping up linearly. A sense resistor (R_sense) converts the LED current to a voltage that is compared to an internal 200 mV reference. When the sense voltage reaches the threshold, the switch turns off and the inductor current freewheels through the external Schottky diode, ramping down. The switch turns on again when the current drops below the lower threshold, maintaining constant average LED current. The CTRL pin voltage adjusts the reference threshold, providing continuous analog dimming control.

Pin Description: AL8807MP-13 Pin Definition and Functions
Pin Function
Pin 1 (LX) Switch node — connect to inductor and Schottky diode
Pin 2 (GND) Ground connection
Pin 3 (VIN) Input power supply (6-36V)
Pin 4 (SENSE) Current sense input — connect to sense resistor
Pin 5 (CTRL) Dimming control — analog voltage 0.5V-2.5V
Application Scenarios: In which products and applications is AL8807MP-13 used
  • MR16 12V AC/DC LED lamp driver for 3W-5W single-LED replacement
  • 12V LED strip constant current driver for uniform brightness
  • Automotive map light and dome light LED driver
  • Battery-powered flashlight LED driver with analog dimming
  • LED display backlight driver with PWM brightness control
Alternative Models: What chips are recommended as replacements for AL8807MP-13
Model Manufacturer Key Difference
AL8860MP-13 Diodes Inc Recommended replacement (active product)
AL8805MP-13 Diodes Inc Lower current (0.5A) variant
PT4115-E Microchip (SST) Similar 1.2A buck LED driver
LM3404MM Texas Instruments 1A buck LED driver, MSOP-8
AL8807WMP-13 Diodes Inc Higher voltage variant

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1