Opens in a new tab

AM26C31MJR

Quad RS-422 diff line driver, 10Mbps, 7ns prop delay, BiCMOS, 3-state, mil-temp -55~125°C, 16-CDIP

14623

Effective Inventory

Image for reference only

Manufacturer Part:

AM26C31MJR

Package:

16-pin CDIP (21.3 x 6.9mm, ceramic)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AM26C31MJR is a quadruple differential line driver from Texas Instruments that meets or exceeds TIA/EIA-422-B and ITU V.11 standards. Using BiCMOS technology, it achieves 7ns propagation delay with only 100µA typical supply current. The military-grade MJR suffix specifies operation from -55°C to +125°C in a 16-pin CDIP package, with ±2000V HBM ESD protection and high-impedance outputs when powered down.

Key Specifications

Drivers 4 (differential, complementary outputs)
Standard TIA/EIA-422-B, ITU V.11
Supply Voltage 5V (single supply)
Signaling Rate Up to 10 Mbps
Propagation Delay 7 ns typical (tPLH = tPHL)
Pulse Skew 0.5 ns typical
Supply Current 100 µA typical (no load)
Differential Output Voltage 2V minimum (RL = 100Ω)
Common-Mode Range -7V to +7V
Outputs 3-state, high impedance when disabled or powered down
Enable Active-high (G) and active-low (Ḡ) enable inputs
Fault Protection -14V to +14V
ESD Protection ±2000V HBM, ±1000V CDM
Package 16-pin CDIP (ceramic)
Operating Temperature -55°C to +125°C (military)

Features

  • Meets TIA/EIA-422-B and ITU V.11 requirements
  • BiCMOS technology: high speed with low power
  • 7ns propagation delay and 0.5ns pulse skew
  • 3-state outputs with high-impedance on power-down
  • Dual enable inputs (active-high and active-low)
  • Complementary differential outputs
  • Direct replacement for AM26LS31 with improved specs
  • MIL-PRF-38535 qualified (M suffix)
  • ±2000V HBM ESD protection

Applications

  • Military and aerospace communication systems
  • Industrial RS-422 bus transmitters
  • Motor encoder interfaces
  • Field transmitters (pressure, temperature sensors)
  • Modbus communication links
  • Long-distance balanced data transmission
Product Introduction: AM26C31MJR Product Introduction

The AM26C31MJR is a military-grade quadruple differential line driver from Texas Instruments, designed to meet or exceed TIA/EIA-422-B and ITU V.11 interface standards. Built with BiCMOS technology, it achieves 7ns propagation delay and 0.5ns pulse skew while drawing only 100µA typical supply current — dramatically lower than the bipolar AM26LS31 it replaces. The device features four independent differential drivers with complementary outputs, dual enable inputs (active-high G and active-low Ḡ), and 3-state outputs that go high-impedance when disabled or powered down. The MJR suffix denotes the ceramic CDIP package with full military temperature range (-55°C to +125°C) and MIL-PRF-38535 qualification.

Working Principle: AM26C31MJR Working Principle

Each of the four AM26C31 drivers takes a single-ended TTL/CMOS input (A) and generates a complementary differential output pair (Y and Z). When the input is high, Y is high and Z is low; when input is low, Y is low and Z is high. The differential output swings approximately 2V across a 100Ω load, meeting the EIA-422 minimum requirement. The BiCMOS output stage combines bipolar transistors for high drive current with CMOS logic for low standby power. The enable function gates all four drivers simultaneously: when G is high AND Ḡ is low, all outputs are active; any other enable combination forces all outputs to high-impedance. When the device is powered down (VCC = 0V), the outputs also go high-impedance, preventing loading of the bus — critical in multi-transmitter RS-422 systems where only one driver should be active at a time.

Pin Description: AM26C31MJR Pin Definition and Functions
Pin Name Description
1 1A Driver 1 input
2 1Y Driver 1 non-inverting output
3 1Z Driver 1 inverting output
4 G Active-high enable (common to all 4 drivers)
5 2Z Driver 2 inverting output
6 2Y Driver 2 non-inverting output
7 2A Driver 2 input
8 GND Ground
9 3A Driver 3 input
10 3Y Driver 3 non-inverting output
11 3Z Driver 3 inverting output
12 Ḡ Active-low enable (common to all 4 drivers)
13 4Z Driver 4 inverting output
14 4Y Driver 4 non-inverting output
15 4A Driver 4 input
16 VCC +5V supply
Application Scenarios: In which products and applications is AM26C31MJR used
  • Military Data Link: Transmit digital data over 1000+ meters of twisted-pair cable in military vehicles and shelters. The -55°C to +125°C temperature range handles unheated vehicle compartments and desert environments. The ceramic CDIP package withstands mechanical shock and vibration. Pair with the AM26C32MJR receiver for a complete military-spec RS-422 link.
  • Motor Encoder Interface: Drive quadrature encoder signals from a motor controller to a drive unit over 50-100m cables. The 10Mbps data rate supports high-resolution encoders at high RPM. The complementary outputs reject common-mode noise picked up on the cable. The 0.5ns pulse skew preserves encoder signal integrity.
  • Industrial Modbus Network: Use as the transmitter in an RS-422 Modbus RTU network. The 3-state outputs allow multiple drivers to share the bus using the enable pins for direction control. The high-impedance power-down state ensures that a failed transmitter does not block bus communication.
Alternative Models: What chips are recommended as replacements for AM26C31MJR
Model Temp Range Package Key Difference
AM26C31IDR -40~85°C SOIC-16 Industrial grade, surface mount
AM26LS31MJ -55~125°C CDIP-16 Bipolar predecessor, higher power
DS26C31TM -55~125°C SOIC-16 NatSemi/TI alternative, military
MC3487 0~70°C DIP-16 NXP/ON Semi, commercial grade

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1