Opens in a new tab

AM26C32MJR

Quad RS-422 diff line receiver, 10Mbps, ±7V CMR, ±200mV sensitivity, fail-safe, mil-temp, 16-CDIP

13943

Effective Inventory

Image for reference only

Manufacturer Part:

AM26C32MJR

Package:

16-pin CDIP (21.3 x 6.9mm, ceramic)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AM26C32MJR is a quadruple differential line receiver from Texas Instruments compliant with TIA/EIA-422-B, TIA/EIA-423-B, and ITU V.10/V.11 standards. It features ±7V common-mode range with ±200mV input sensitivity, 60mV input hysteresis, and fail-safe open-input detection (output goes high). BiCMOS technology reduces power to one-fifth of the AM26LS32. The MJR suffix denotes military-grade -55°C to +125°C operation in 16-pin CDIP.

Key Specifications

Receivers 4 (differential)
Standards TIA/EIA-422-B, TIA/EIA-423-B, ITU V.10/V.11
Supply Voltage 5V (single supply)
Signaling Rate Up to 10 Mbps
Propagation Delay 17 ns typical
Common-Mode Range -7V to +7V
Input Sensitivity ±200 mV over full common-mode range
Input Hysteresis 60 mV typical
Supply Current 10 mA typical
Output Type 3-state, 6mA source/sink
Fail-Safe Open input → output high
Fault Protection -11V to +14V on A/B inputs
ESD Protection ±3000V HBM, ±2000V CDM
Package 16-pin CDIP (ceramic)
Operating Temperature -55°C to +125°C (military)

Features

  • Compliant with EIA-422-B, EIA-423-B, and ITU V.10/V.11
  • ±7V common-mode range with ±200mV sensitivity
  • 60mV input hysteresis for noise immunity
  • Input fail-safe: open inputs force output high
  • 3-state outputs with active-high and active-low enable
  • BiCMOS technology: 1/5 power of AM26LS32
  • ±3000V HBM ESD protection
  • Direct replacement for AM26LS32
  • MIL-PRF-38535 qualified (M suffix)

Applications

  • Military and aerospace communication receivers
  • Industrial RS-422/RS-423 bus receivers
  • Motor encoder signal receivers
  • Factory automation data links
  • Smart grid and power automation
  • Servo and AC motor drive receivers
Product Introduction: AM26C32MJR Product Introduction

The AM26C32MJR is a military-grade quadruple differential line receiver from Texas Instruments, designed to receive balanced or unbalanced digital data per TIA/EIA-422-B, TIA/EIA-423-B, and ITU V.10/V.11 standards. It features ±7V common-mode input range with ±200mV sensitivity across the full range, 60mV input hysteresis for noise rejection, and a fail-safe circuit that forces the output high when inputs are open (detecting broken wires). BiCMOS fabrication reduces power consumption to approximately one-fifth of the bipolar AM26LS32 while maintaining AC and DC performance. The MJR suffix specifies the ceramic CDIP package with -55°C to +125°C operation and MIL-PRF-38535 qualification for military applications.

Working Principle: AM26C32MJR Working Principle

Each of the four AM26C32 receivers compares the voltage difference between its A and B inputs. When VA – VB exceeds +200mV, the output Y goes high; when VA – VB falls below -200mV, Y goes low. The 60mV hysteresis band prevents output oscillation when the differential input is near the switching threshold. The ±7V common-mode range means the inputs can be at any voltage from -7V to +7V relative to ground, as long as the differential voltage exceeds the ±200mV threshold — critical in industrial environments where ground potential differences between transmitter and receiver can be significant. The fail-safe circuit biases the inputs so that if both A and B are floating (broken cable), the output defaults to a defined high state. The 3-state outputs are controlled by dual enable pins (G and Ḡ), allowing multiple receivers to share a common data bus in bus-organized systems.

Pin Description: AM26C32MJR Pin Definition and Functions
Pin Name Description
1 1B Receiver 1 inverting input
2 1A Receiver 1 non-inverting input
3 1Y Receiver 1 output
4 G Active-high enable (common to all 4 receivers)
5 2Y Receiver 2 output
6 2A Receiver 2 non-inverting input
7 2B Receiver 2 inverting input
8 GND Ground
9 3B Receiver 3 inverting input
10 3A Receiver 3 non-inverting input
11 3Y Receiver 3 output
12 Ḡ Active-low enable (common to all 4 receivers)
13 4Y Receiver 4 output
14 4A Receiver 4 non-inverting input
15 4B Receiver 4 inverting input
16 VCC +5V supply
Application Scenarios: In which products and applications is AM26C32MJR used
  • Military RS-422 Communication Link: Pair with the AM26C31MJR driver to form a complete military-grade RS-422 data link. The ±7V common-mode range handles ground potential differences between vehicles or shelters. The fail-safe circuit detects cable disconnection, triggering an alarm in the system controller. The ceramic package and -55°C to +125°C rating ensure reliability in extreme environments.
  • Industrial Encoder Receiver: Receive quadrature encoder signals from a remote motor. The 60mV hysteresis rejects induced noise on long cable runs near motor drives. The ±200mV sensitivity allows the encoder signals to attenuate over distance without loss of reception. The 10Mbps data rate supports high-resolution encoders at 3000+ RPM.
  • Smart Grid Data Concentrator: Use the four receivers to accept data from up to four RS-422 metering nodes. The 3-state outputs allow all four receiver outputs to connect to a shared MCU data bus, with the enable pins selecting which receiver’s data is read. The fail-safe feature ensures that a disconnected meter is detected immediately.
Alternative Models: What chips are recommended as replacements for AM26C32MJR
Model Temp Range Package Key Difference
AM26C32IDR -40~85°C SOIC-16 Industrial grade, surface mount
AM26LS32MJ -55~125°C CDIP-16 Bipolar predecessor, 5x higher power
DS26C32ATM -40~85°C SOIC-16 TI/NatSemi alternative
SN65HVD33 -40~125°C SOIC-16 TI, RS-485 full-duplex transceiver

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1