Opens in a new tab

AMC1301DWVR

Isolated amp, +/-250mV in, 8.2V/V gain, 7070Vpk isolation, shunt current sensing, SOIC-8

4228

Effective Inventory

Image for reference only

Manufacturer Part:

AMC1301DWVR

Package:

Wide-body SOIC-8 DWV (5.85 x 7.50 x 2.35 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AMC1301DWVR from Texas Instruments is a precision reinforced isolated amplifier with +/-250mV input range optimized for shunt-based current sensing. It features fixed 8.2V/V gain, 7070Vpk reinforced isolation, and 15kV/us CMTI in a wide-body SOIC-8 package.

Key Specifications

Input Range +/-250mV (differential)
Fixed Gain 8.2 V/V
Gain Error +/-0.3% (max)
Offset Error +/-0.2mV (max)
Offset Drift +/-3uV/C (max)
Nonlinearity 0.03% (max)
Isolation Rating 7070Vpk (reinforced), 5000Vrms (UL1577)
Working Voltage 1000Vrms
CMTI 15kV/us (min)
Bandwidth 210kHz (typ)
Supply Voltage 3.0V to 5.5V (high and low side)
Operating Temperature -40 to 125 C

Features

  • +/-250mV input optimized for shunt resistor current sensing
  • Fixed gain of 8.2V/V with low drift
  • 7070Vpk reinforced isolation per DIN EN IEC 60747-17
  • 5000Vrms isolation per UL1577
  • 15kV/us common-mode transient immunity
  • Integrated diagnostics: common-mode overvoltage and supply loss detection
  • Highly resistant to magnetic interference
  • 3.3V or 5V operation on both sides

Applications

  • Motor drive current sensing
  • Onboard charger (OBC) current measurement
  • DC-DC converter current sensing
  • Frequency inverter shunt measurement
  • Battery management system (BMS) current sensing
Product Introduction: AMC1301DWVR Product Introduction

The AMC1301DWVR from Texas Instruments is a precision isolated amplifier with a +/-250mV input voltage range optimized for current measurements using shunt resistors. The device features a fixed gain of 8.2V/V with excellent DC accuracy: +/-0.2mV offset error, +/-0.3% gain error, and 0.03% nonlinearity. The input circuitry is separated from the output by a reinforced isolation barrier certified to 7070Vpk per DIN EN IEC 60747-17 (VDE 0884-17) and 5000Vrms per UL1577, supporting a working voltage of up to 1000Vrms. The isolation barrier is highly resistant to magnetic interference and provides 15kV/us minimum common-mode transient immunity. Integrated diagnostic features include common-mode overvoltage detection and missing high-side supply voltage detection, simplifying system-level fault handling. Both the high-side and low-side operate from 3.0V to 5.5V, and the device is available in a wide-body 8-pin SOIC (DWV) package rated for -40 to 125 C.

Working Principle: AMC1301DWVR Working Principle

The AMC1301DWVR operates as a precision isolated amplifier using capacitive isolation technology. Key subsystems include: (1) High-Side Input Stage – a differential amplifier with +/-250mV input range accepts signals directly from shunt resistors; the input is optimized for low voltage levels with high common-mode rejection; (2) Modulator – a sigma-delta modulator on the high-side converts the analog input to a digital bitstream; (3) Capacitive Isolation Barrier – two high-voltage capacitors transmit the digital bitstream across the isolation barrier; this barrier provides reinforced isolation up to 7070Vpk and is highly resistant to magnetic interference unlike optocouplers; (4) Demodulator – on the low side, a demodulator reconstructs the analog signal from the received bitstream; (5) Output Filter – an internal analog filter produces the differential output voltage centered at VDD2/2; (6) Diagnostic Circuit – monitors the high-side common-mode voltage and supply; a fault condition drives the differential output to a failsafe voltage level (-2.545V) that can be detected by the downstream ADC.

Pin Description: AMC1301DWVR Pin Definition and Functions
Pin Name Type Function
1 VDD1 Power High-side supply (3.0-5.5V)
2 VINN Input Negative differential input
3 VINP Input Positive differential input
4 GND1 Power High-side ground
5 GND2 Power Low-side ground
6 VOUTN Output Negative differential output
7 VOUTP Output Positive differential output
8 VDD2 Power Low-side supply (3.0-5.5V)
Application Scenarios: In which products and applications is AMC1301DWVR used
  • Motor drive current sensing: shunt resistor measurement with galvanic isolation from high-voltage bus
  • OBC current measurement: isolated shunt sensing in onboard EV chargers
  • DC-DC converter: output current monitoring with reinforced isolation
  • Frequency inverter: phase current measurement using shunt resistors
  • BMS current sensing: isolated battery current measurement in energy storage systems
Alternative Models: What chips are recommended as replacements for AMC1301DWVR
Manufacturer Part Number Package Notes
TI AMC1300DWVR SOIC-8 +/-250mV, higher bandwidth (300kHz)
TI AMC1301SDWVR SOIC-8 Extended temp: -55 to 125C
Analog Devices ADuM3190ARQZ QSOP-16 Isolated error amplifier, different function
TI AMC1210M38 TQFP-48 4-ch isolated modulator
Silicon Labs Si8920B-IS SOIC-8 Isolated amplifier, +/-312mV input

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1