Opens in a new tab

AMS1117-3.3

1A LDO, 3.3V fixed, 1.1V dropout, SOT-223

22100

Effective Inventory

Image for reference only

Manufacturer Part:

AMS1117-3.3

Package:

SOT-223 (6.5×3.5×1.8 mm)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AMS1117-3.3 is a 1A low-dropout (LDO) voltage regulator providing a fixed 3.3V output. Manufactured by Advanced Monolithic Systems, it is a popular industry-standard LDO known for its reliability and ease of use. Packaged in SOT-223, it features low dropout voltage, current limiting, and thermal shutdown protection for robust power supply designs.

Key Specifications

Output Voltage 3.3V (Fixed, ±1% or ±2%)
Maximum Output Current 1A
Input Voltage Range 4.5V to 15V
Dropout Voltage 1.1V @ 800 mA
Line Regulation 0.2% (max)
Load Regulation 0.4% (max)
Quiescent Current 5 mA (typical)
Ripple Rejection 60 dB @ 120 Hz
Operating Temperature -40°C to +125°C (junction)
Package SOT-223 (6.5×3.5×1.8 mm)

Features

  • 1A output current capability
  • Low dropout voltage: 1.1V at 800 mA
  • Fixed 3.3V output with tight tolerance
  • Internal current limiting and thermal shutdown
  • Stable with tantalum or aluminum output capacitors (10 µF min)
  • SOT-223 package with thermal tab for heat dissipation
  • Industry-standard pinout compatible with 1117 family

Applications

  • 5V to 3.3V logic level conversion power supply
  • Embedded system point-of-load regulation
  • Battery charger and power management
  • Arduino and development board 3.3V rail
  • Consumer electronics and set-top box power
Product Introduction: AMS1117-3.3 Product Introduction

The AMS1117-3.3 from Advanced Monolithic Systems is a widely used 1A low-dropout voltage regulator providing a fixed 3.3V output. With a dropout voltage of only 1.1V at 800 mA, it efficiently converts 5V to 3.3V for logic level power supply. The SOT-223 package features a thermal tab for effective heat dissipation, while internal current limiting and thermal shutdown ensure reliable operation. It is an industry-standard LDO found in countless embedded and consumer designs.

Working Principle: AMS1117-3.3 Working Principle

The AMS1117-3.3 uses a PNP pass transistor in a common-emitter (LDO) configuration with an internal bandgap reference set to 3.3V. The error amplifier compares the output voltage (sensed via an internal resistor divider) with the reference and adjusts the PNP pass transistor drive to maintain regulation. The low dropout is achieved because the PNP transistor saturation voltage can be very low compared to NPN-based regulators. Internal current limiting senses the pass transistor current and limits it to approximately 1.2A, while thermal shutdown disables the output at approximately 150°C junction temperature.

Pin Description: AMS1117-3.3 Pin Definition and Functions
Pin Name Type Function
1 GND/ADJ Power Ground (fixed version) or adjust (adj version)
2 VOUT Output Regulated 3.3V output (also thermal tab)
3 VIN Input Input voltage (4.5-15V)
Application Scenarios: In which products and applications is AMS1117-3.3 used
  • 5V to 3.3V logic level power conversion for MCU and FPGA designs
  • Embedded system 3.3V point-of-load regulation
  • Arduino, Raspberry Pi, and development board 3.3V power rails
  • Consumer electronics including set-top boxes and routers
  • Battery-powered device power management from 4.5V+ sources
Alternative Models: What chips are recommended as replacements for AMS1117-3.3
Manufacturer Part Number Package Notes
TI AMS1117-3.3 SOT-223 TI-manufactured equivalent
Diodes Inc AP1117E33G-13 SOT-223 Pin-compatible, 1A LDO
Micrel/Microchip MIC39100-3.3WS SOT-223 1A, ultra-low dropout
ON Semiconductor NCP1117DT33G SOT-223 1A LDO, 3.3V fixed
Infineon TLE4274D SOT-223 Automotive qualified alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1