Product Overview
The ANN-MB-00 is a multi-band L1/L2 active GNSS antenna from u-blox, designed for high-precision RTK positioning applications. Supporting GPS L1/L2, GLONASS G1/G2, BeiDou B1/B2, Galileo E1/E5b, and QZSS L1/L2 bands, this antenna features a high-performance dual-resonance dual-feed RHCP patch element with built-in LNA and SAW pre-filtering. The antenna includes a 5-meter RG174 cable with SMA connector and magnetic mounting base, housed in an IP67-rated enclosure measuring 82 x 60 x 22.5mm.
Key Specifications
| Supported Bands | L1 (1559-1606MHz) + L2/E5b/B2I (1197-1249MHz) |
| GNSS Constellations | GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS |
| Polarization | RHCP |
| Peak Antenna Gain | 2.0 dBi (without ground plane) |
| Average LNA Gain | 28 dB |
| Maximum Noise Figure | 3.2 dB |
| Maximum VSWR | 2 |
| Supply Voltage | 3.0V to 5.0V |
| Supply Current | 15 mA (Typ) @ 3V |
| Connector | SMA (Plug) |
| Cable | RG174, 5.0 meters |
| Dimensions | 82.0 x 60.0 x 22.5 mm |
| Weight | 164g (incl. cable) |
| IP Rating | IP67 |
| Operating Temperature | -40°C to +85°C |
| ESD Protection | ±15 kV (IEC 61000-4-2) |
Features
- Dual-band L1/L2 reception for multi-constellation RTK positioning
- Built-in high-gain LNA with SAW pre-filtering for excellent signal quality
- IP67 ingress protection for harsh outdoor environments
- 5-meter RG174 cable with SMA connector for flexible antenna placement
- Perfect match for u-blox ZED-F9P high-precision RTK receiver
- ±15kV ESD protection for reliable operation
- RTK high-precision positioning and surveying
- Unmanned aerial vehicle (UAV) navigation
- Precision agriculture and auto-steering
- Construction machine control and guidance
- Autonomous vehicle and robotics navigation
- RTK surveying and geodetic measurement systems
- Precision agriculture auto-steering and variable rate application
- Construction machine control (excavators, dozers, graders)
- UAV mapping and photogrammetry navigation
- Autonomous vehicle and mobile robot localization
Applications
Product Introduction: ANN-MB-00 Product Introduction
The u-blox ANN-MB-00 is a dual-band (L1/L2) active GNSS antenna designed specifically for high-precision RTK (Real-Time Kinematic) positioning applications. The antenna supports all major GNSS constellations — GPS (L1/L2), GLONASS (G1/G2), Galileo (E1/E5b), BeiDou (B1/B2), and QZSS (L1/L2) — enabling multi-band, multi-constellation RTK with centimeter-level accuracy. The antenna element uses a dual-resonance, dual-feed RHCP (Right-Hand Circular Polarization) patch design with a built-in high-gain LNA (28dB) and SAW pre-filtering to suppress out-of-band interference. Housed in an IP67-rated enclosure, the antenna is protected from dust and temporary water immersion, making it suitable for demanding outdoor deployments. The integrated magnetic base provides easy mounting on metal surfaces, with two M4 screw holes for permanent installation. The 5-meter RG174 cable with SMA connector provides flexible routing to the GNSS receiver. Note: This product has been announced as EOL; ANN-MB-01 (SMB connector) or ANN-MB-02 (MCX connector) are recommended for new designs.
Working Principle: ANN-MB-00 Working Principle
The ANN-MB-00 operates as an active GNSS antenna that receives L-band satellite signals and amplifies them before transmission to the GNSS receiver. The dual-resonance patch antenna element is designed to resonate at both L1 (1559-1606MHz) and L2/E5b/B2I (1197-1249MHz) bands simultaneously, using dual feed points to achieve right-hand circular polarization (RHCP) which matches the polarization of GPS/GNSS satellite transmissions. The received RF signal passes through a SAW (Surface Acoustic Wave) band-pass pre-filter that rejects out-of-band interference, particularly from nearby cellular transmitters. The filtered signal then enters the LNA (Low Noise Amplifier) which provides 28dB of gain while adding only 3.2dB maximum noise figure. The amplified signal is delivered to the GNSS receiver through the 5-meter RG174 coaxial cable. Power for the LNA is supplied from the GNSS receiver through the coaxial center conductor (typically 3-5V DC), with bias tee separation at both ends.
Pin Description: ANN-MB-00 Pin Definition and Functions
| Connector | Name | Type | Function |
|---|---|---|---|
| SMA Plug | RF Output | Output | Amplified GNSS RF signal output with DC power input (3-5V via center conductor) |
Application Scenarios: In which products and applications is ANN-MB-00 used
Alternative Models: What chips are recommended as replacements for ANN-MB-00
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| u-blox | ANN-MB-01 | 82x60x22.5mm | SMB connector, recommended replacement |
| u-blox | ANN-MB-02 | 82x60x22.5mm | MCX connector, recommended replacement |
| u-blox | ANN-MB3-00 | 82x60x22.5mm | L1/L2/L5 triple-band variant |
| Harxon | HX-CSX601A | Similar size | L1/L2 multi-band GNSS antenna |
| Tallysman | TW3882 | Similar size | Multi-band GNSS antenna, IP67 |
Recommend Parts

RK73H1ETTP20R0F
20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm
IN STOCK: 33180pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS61021ADSGR
3A synchronous boost converter, 1.8-5.5V, VSSOP-8
Brand: TI
Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)
IN STOCK: 12398pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

ADUM5000ARWZ-RL
500mW isolated DC-DC converter, 3.3/5V, SOIC-16W
Brand: ADI
Package: SOIC-16W (10.3 x 7.5 mm, RW package)
IN STOCK: 6373pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 9357pcs
Cargo cycle: 3-7 Days
The minimum order is 1






