Opens in a new tab

AP1509-K5G-13

2A 5V buck converter, 150kHz, SOIC-8, 4.5-22Vin, integrated switch, thermal shutdown

3590

Effective Inventory

Image for reference only

Manufacturer Part:

AP1509-K5G-13

Package:

SOIC-8 (4.90 x 3.90 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AP1509-K5G-13 from Diodes Incorporated is a 150kHz, 2A PWM buck DC/DC converter in a SOIC-8 package. Available in 5V fixed output, it integrates the switching transistor and requires minimal external components for step-down voltage regulation.

Key Specifications

Output Voltage 5.0 V fixed (+/-4%)
Output Current 2 A maximum
Input Voltage 4.5 V to 22 V
Switching Frequency 150 kHz (+/-15%)
Efficiency Up to 90%
On/Off Control Yes (logic level shutdown)
Operating Temperature -40C to +85C

Features

  • 2A output current with integrated NPN switching transistor in SOIC-8
  • 150kHz fixed switching frequency reduces external filter component size
  • 5V fixed output with +/-4% tolerance over line, load, and temperature
  • Thermal shutdown and current limit protection for reliable operation
  • Logic-level ON/OFF shutdown control for standby power management
  • Internal compensation simplifies design with no external compensation network

Applications

  • 5V step-down regulator from 12V or 24V input at up to 2A load
  • On-card distributed power supply for local voltage regulation
  • Battery-powered device 5V supply with shutdown control
Product Introduction: AP1509-K5G-13 Product Introduction

The AP1509-K5G-13 from Diodes Incorporated is a 150kHz, 2A PWM step-down DC/DC converter with 5V fixed output in an SOIC-8 package. The device is a monolithic IC designed for step-down voltage conversion, integrating the power switching transistor on-chip to save board space and reduce component count. The 150kHz fixed switching frequency allows the use of smaller external inductor and capacitor values compared to lower-frequency switching regulators, reducing overall solution size and cost. The 5V fixed output version provides +/-4% output voltage tolerance over the full input voltage, output current, and temperature range. The wide 4.5V to 22V input voltage range supports operation from various unregulated DC sources including 5V, 9V, 12V, and 24V rails. Internal compensation eliminates the need for external loop compensation components, simplifying the design. Protection features include thermal shutdown to prevent over-temperature damage and current limit protection against output overload conditions. When current limit is active and the feedback voltage drops below 0.5V, the switching frequency is reduced to limit power dissipation. The logic-level ON/OFF pin enables shutdown mode for standby power management.

Working Principle: AP1509-K5G-13 Working Principle

The AP1509-K5G-13 uses voltage-mode PWM control with an integrated NPN power switch. (1) Voltage-Mode PWM: The error amplifier compares a fraction of the output voltage with an internal 1.23V reference. The error amplifier output controls the duty cycle of the PWM comparator, which sets the on-time of the integrated NPN switching transistor. (2) Power Stage: During the on-time, the internal NPN transistor conducts, connecting the input voltage to the output through the external inductor. The inductor current ramps up linearly, storing energy in the magnetic field. During the off-time, the NPN transistor turns off and the external Schottky diode (catch diode) provides a path for the inductor current, releasing the stored energy to the output. (3) 150kHz Oscillator: The internal oscillator generates a 150kHz sawtooth ramp that is compared with the error amplifier output to generate the PWM signal. The 150kHz frequency balances switching loss and component size. (4) Current Limit: When the switch current exceeds the limit (typically 2.5A), the on-time is terminated immediately. If VFB drops below 0.5V during current limit, the switching frequency is reduced by a factor of 5 to limit power dissipation in fault conditions. (5) Thermal Shutdown: When the junction temperature exceeds approximately 160C, the switching is disabled until the temperature drops by the hysteresis amount.

Pin Description: AP1509-K5G-13 Pin Definition and Functions
Pin Name Function
1 VIN Input supply (4.5-22V)
2 SW Switch output (to inductor)
3 GND Ground
4 FB Feedback input
5 ON/OFF Shutdown control (high=on)
6-8 GND Ground (thermal)
Application Scenarios: In which products and applications is AP1509-K5G-13 used
  • 5V step-down regulator from 12V or 24V input at up to 2A load in SOIC-8
  • On-card distributed power supply for local 5V voltage regulation
  • Battery-powered device 5V supply with logic-level shutdown control
Alternative Models: What chips are recommended as replacements for AP1509-K5G-13
Manufacturer Part Number Package Notes
Diodes Inc AP1509-33K5G-13 SOIC-8 3.3V output version
Diodes Inc AP1509-ADJG-13 SOIC-8 Adjustable output version
TI LM2596T-5.0 TO-263 3A, 150kHz, through-hole
Monolithic Power MP1584EN-LF-Z SOIC-8 4A, 1.5MHz, smaller L

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1