Opens in a new tab

AP3012KTR-G1

Boost converter for LED driver, 1.5MHz, 2A switch, SOT-23-6

5257

Effective Inventory

Image for reference only

Manufacturer Part:

AP3012KTR-G1

Package:

SOT-23-6

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AP3012KTR-G1 from Diodes Incorporated is a 1.5MHz boost converter designed for LED driver applications with a 2A internal switch and PWM dimming in a compact SOT-23-6 package.

Key Specifications

Package SOT-23-6

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: AP3012KTR-G1 Product Introduction

The AP3012KTR-G1 from Diodes Incorporated is a 1.5MHz boost converter designed for LED driver applications with a 2A internal switch and PWM dimming in a compact SOT-23-6 package.

Working Principle: AP3012KTR-G1 Working Principle

The AP3012KTR-G1 is a boost converter IC from Diodes Incorporated in SOT-23-6, with a 2A internal N-channel MOSFET switch operating at 1.5MHz. It is designed for LED driver applications (white LED backlights) and boost power conversion. The control scheme is constant-off-time (COT) peak current mode: the MOSFET turns on and current ramps up through the inductor; when the peak current reaches the threshold set by the FB pin, the MOSFET turns off for a fixed 330ns (at VIN=5V), allowing the inductor current to flow through the diode to the output. The 1.5MHz switching frequency allows the use of small 2.2-4.7uH inductors in 0805 footprint and 1uF ceramic output capacitors. For LED driver applications, a sense resistor (RSET) from FB to GND sets the LED current: ILED = 0.25V / RSET (e.g., RSET=8.3 ohm for 20mA). The output voltage is self-regulating: the boost converter raises VOUT until the desired LED current flows through RSET, producing 0.25V at FB. For standard boost applications, a resistor divider from VOUT to FB sets the output voltage: VOUT = 0.25V x (1 + R1/R2). The EN pin provides shutdown (0.1uA Iq) and can be used for PWM dimming of LEDs (frequencies 100Hz-10kHz). The internal MOSFET has 0.5 ohm RDS(on) and 20V breakdown, limiting maximum output to approximately 18V (typical for 4-6 series white LEDs). The overvoltage protection (OVP) at 22V protects against open-LED conditions. The -KTR-G1 suffix specifies SOT-23-6, tape-and-reel, lead-free.

Pin Description: AP3012KTR-G1 Pin Definition and Functions
Pin Name Type Function
1 SW Output Switch pin (internal N-ch MOSFET drain, connects to inductor)
2 GND Power Ground
3 FB Input Feedback input (connect resistor divider from output, 0.25V reference)
4 EN Input Enable (HIGH=on, internal pull-up, LOW=shutdown, 0.1uA Iq)
5 VIN Power Input supply (2.6-16V)
6 NC – No connect
Application Scenarios: In which products and applications is AP3012KTR-G1 used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for AP3012KTR-G1
    Manufacturer Part Number Package Notes
    Diodes Inc AP3012KTR-G1 SOT-23-6 Same device, Diodes Inc brand
    Diodes Inc AP3015KTR-G1 SOT-23-6 1A version, higher current switch
    Texas Instruments TPS61041DBVR SOT-23-5 Boost LED driver, 1.2MHz, TI brand
    Monolithic Power MP1542DK-LF-Z SOT-23-6 Boost, 2A switch, 1.3MHz, MP brand
    Silergy SY7208AAC SOT-23-6 Boost, 2A switch, 1MHz, Silergy brand

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1