Opens in a new tab

AP7167-SPG-13

1.2A LDO, adjustable 0.8-5V, POK output, SOIC-8 EP

5678

Effective Inventory

Image for reference only

Manufacturer Part:

AP7167-SPG-13

Package:

SOIC-8 EP (5 x 4 x 1.5 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AP7167-SPG-13 from Diodes Incorporated is a 1.2A low-dropout regulator with adjustable output (0.8V to 5V), 250mV dropout, and power-good output in SOIC-8 EP package. It provides efficient voltage regulation for point-of-load applications.

Key Specifications

Output Current 1.2 A
Dropout Voltage 250 mV max @ 1.2A
Input Voltage 2.2 V to 5.5 V
Output Voltage Adjustable 0.8V to 5V
Reference Voltage 0.8V +/-1%
Output Noise 40 uV RMS typical
PSRR 70 dB @ 1kHz
Power-Good Output Yes (POK pin)
Package SOIC-8 EP (exposed pad)
Operating Temperature -40 to +85 C

Features

  • 1.2A output with only 250mV dropout for efficient regulation
  • Adjustable output from 0.8V using external resistor divider
  • Power-good (POK) output for power sequencing
  • 0.8V +/-1% accurate reference voltage
  • 70dB PSRR at 1kHz for clean output
  • Thermal shutdown and short-circuit protection

Applications

  • Point-of-load regulation for FPGA/DSP core voltages
  • Post-regulation for switching power supplies
  • Set-top box and networking equipment POL
  • Portable device core voltage supply
  • Battery-powered equipment regulation
Product Introduction: AP7167-SPG-13 Product Introduction

The AP7167-SPG-13 from Diodes Incorporated is a 1.2A low-dropout (LDO) regulator with adjustable output voltage from 0.8V to 5V, featuring 250mV maximum dropout voltage at full load current and a power-good (POK) output for power sequencing. The 0.8V reference voltage is accurate to +/-1%, enabling precise low-voltage output setting for FPGA and DSP core voltages. The device achieves 70dB PSRR at 1kHz and 40uV RMS output noise, providing clean power for sensitive loads. The SOIC-8 package with exposed pad (EP) provides efficient thermal dissipation. The SPG suffix denotes SOIC-8 EP package and -13 indicates tape and reel packaging.

Working Principle: AP7167-SPG-13 Working Principle

The AP7167-SPG-13 operates as a low-dropout linear regulator using a CMOS pass element. (1) The error amplifier compares a fraction of the output voltage (via external resistor divider) against the internal 0.8V reference and drives the PMOS pass transistor to maintain regulation. The PMOS architecture allows the low 250mV dropout voltage since the pass element operates in the linear region with minimal VDS. (2) The power-good (POK) comparator monitors the output voltage and asserts the open-drain POK output when the output is within the specified regulation window, enabling power sequencing in multi-rail systems. (3) The 70dB PSRR at 1kHz is achieved through the high-gain error amplifier and internal compensation, attenuating input supply ripple before it reaches the output. Thermal shutdown activates at approximately 150C junction temperature, and current limit protects against output short circuits.

Pin Description: AP7167-SPG-13 Pin Definition and Functions
Pin Name Function
1 EN Enable input (active high)
2 IN Input supply
3 IN Input supply
4 NC No connect
5 ADJ Feedback adjustment input
6 POK Power-good output (open drain)
7 GND Ground
8 OUT Regulator output
EP GND Exposed pad (ground/thermal)
Application Scenarios: In which products and applications is AP7167-SPG-13 used
  • Point-of-load regulation for FPGA/DSP core voltages (0.8V, 1.0V, 1.2V)
  • Post-regulation after switching converter for noise-sensitive loads
  • Set-top box and networking equipment point-of-load power
  • Portable device core voltage supply with POK sequencing
  • Battery-powered equipment low-dropout regulation
Alternative Models: What chips are recommended as replacements for AP7167-SPG-13
Model Manufacturer Key Difference
AP7167-FPG-13 Diodes Fixed output voltage version
AP2112K-ADJTRG1 Diodes 0.6A, SOT-23-5, adjustable
TLV75801PDBVR TI 1A, adjustable, SOT-23-5
NCP511SNADJT1G onsemi 0.8A, adjustable, SOT-23-5
RT9013-GB Richtek 0.5A, adjustable, SOT-23-5

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1