Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » AT24C512C-SSHD-B

AT24C512C-SSHD-B

512Kbit I2C EEPROM, 1MHz, 128B Page, TSSOP-8

12345

Effective Inventory

Image for reference only

Manufacturer Part:

AT24C512C-SSHD-B

Package:

TSSOP-8 (4.4 x 3.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AT24C512C-SSHD-B from Microchip Technology is a 512-Kbit I2C serial EEPROM with 128-byte page write, 1MHz clock support, and 1 million write cycle endurance in a TSSOP-8 package.

Key Specifications

Type 512-Kbit I2C Serial EEPROM
Density 512 Kbit (64 Kbyte)
Organization 65,536 x 8 bits
Interface I2C (1 MHz / 400 kHz / 100 kHz)
Page Size 128 bytes
Supply Voltage 1.7 V to 5.5 V
Write Cycle Time 5 ms (max page write)
Endurance >1,000,000 write cycles
Data Retention >200 years
Write Protect Hardware WP pin
Package TSSOP-8
Operating Temperature -40C to +85C

Features

  • 512 Kbit (64 Kbyte) storage capacity
  • 1 MHz I2C high-speed mode support
  • 128-byte page write buffer
  • 1.7V to 5.5V wide supply range
  • >1 million write cycle endurance
  • >200 year data retention
  • Hardware write protect pin
  • Software write protect for upper quadrant

Applications

  • Data logging and calibration storage
  • Configuration parameter storage
  • Industrial sensor calibration data
  • Embedded system settings
Product Introduction: AT24C512C-SSHD-B Product Introduction

The AT24C512C-SSHD-B from Microchip Technology is a 512-Kbit (64 Kbyte) serial I2C EEPROM in a TSSOP-8 surface mount package. The device supports I2C bus speeds up to 1 MHz for fast data access, with backward compatibility to 400 kHz and 100 kHz modes. The 128-byte page write buffer allows efficient writing of large data blocks in a single operation. The 1.7V to 5.5V supply range covers both low-voltage and 5V systems. The device provides both hardware write protect (WP pin) that prevents any write operation when asserted, and software-controlled write protect for the upper quadrant of the memory array. The greater than 1 million write cycle endurance and greater than 200 year data retention ensure long-term reliability for calibration data and configuration parameters. The SSHD-B suffix indicates TSSOP-8 package with tape and reel packaging.

Working Principle: AT24C512C-SSHD-B Working Principle

The AT24C512C-SSHD-B uses a floating-gate EEPROM cell array organized as 65,536 words of 8 bits each. The I2C interface uses a 2-wire protocol (SDA data, SCL clock) with 7-bit device address (1010xxx) plus R/W bit. The 16-bit address word (2 bytes) addresses all 65,536 locations. During a page write operation, up to 128 bytes are loaded into the page write buffer and then simultaneously programmed into the EEPROM array during the 5ms internal write cycle. Partial page writes wrap within the 128-byte page boundary. Reading can be sequential (current address read) or random (address-specified read). The WP pin, when tied to VCC, disables all write operations to the entire memory array for data protection. The software write protect allows protecting the upper 1/4, upper 1/2, or entire array via a special sequence. The I2C interface supports standard mode (100 kHz), fast mode (400 kHz), and fast mode plus (1 MHz) with corresponding timing requirements.

Pin Description: AT24C512C-SSHD-B Pin Definition and Functions
Pin Name Type Function
1 A0 Input Address bit 0 / SWP protect
2 A1 Input Address bit 1
3 A2 Input Address bit 2
4 VSS Power Ground
5 SDA I/O Serial data (open-drain, bidirectional)
6 SCL Input Serial clock
7 WP Input Write protect (HIGH = protect all)
8 VCC Power Supply (1.7-5.5V)
Application Scenarios: In which products and applications is AT24C512C-SSHD-B used
  • Sensor calibration data storage with >200yr retention and hardware WP
  • Network device MAC address and serial number storage in TSSOP-8
  • Industrial PLC configuration backup with 1MHz fast I2C access
  • Medical device patient settings storage with 1M write cycle endurance
Alternative Models: What chips are recommended as replacements for AT24C512C-SSHD-B
Manufacturer Part Number Package Notes
Microchip AT24C512C-SSHL-T TSSOP-8 Same device, different temp range
ST M24M01-RMN6TP TSSOP-8 1Mbit, higher density, upgrade
onsemi CAT24C512WI-GT3 TSSOP-8 Pin-compatible equivalent
Renesas 24LC512-I/ST TSSOP-8 Pin-compatible equivalent
Microchip AT24C256C-SSHL-B TSSOP-8 256Kbit, half density, lower cost

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1