Opens in a new tab

AT24CM01-SHD-B

1Mbit I2C EEPROM, 1MHz, 256B page, 1.7-5.5V, SOIJ-8

22695

Effective Inventory

Image for reference only

Manufacturer Part:

AT24CM01-SHD-B

Package:

8-Pin SOIJ (5.3 x 5.3 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AT24CM01-SHD-B is a Microchip 1Mbit (128Kx8) I2C serial EEPROM with 1MHz clock, 1.7-5.5V operation, 1M cycle endurance, 256-byte page write, and hardware write-protect. SHD suffix indicates SOIJ-8 package, industrial temperature.

Key Specifications

Capacity 1 Mbit (128K x 8)
Interface I2C, 400kHz/1MHz
Page Size 256 bytes
Supply 1.7 V to 5.5 V
Endurance 1,000,000 cycles
Write Time 5 ms max

Features

  • 1Mbit I2C EEPROM
  • 1MHz clock at 2.5V+
  • 256-byte page write
  • 1.7V to 5.5V operation
  • 1 million cycle endurance
  • 6uA standby current
  • Hardware write-protect pin

Applications

  • Industrial parameter storage
  • Consumer electronics configuration
  • Medical device calibration data
  • IoT sensor calibration
Product Introduction: AT24CM01-SHD-B Product Introduction

The AT24CM01-SHD-B is a Microchip 1Mbit I2C serial EEPROM organized as 128K x 8 bits in an 8-pin SOIJ package. The device supports both 400kHz (standard mode) and 1MHz (fast mode plus) I2C clock frequencies, enabling high-speed data transfer in data-intensive applications. The 1.7V to 5.5V supply range supports operation from low-voltage battery systems to 5V rails. The 256-byte page write capability significantly improves write throughput compared to byte-write-only devices. The hardware write-protect (WP) pin protects the entire memory array when asserted, preventing accidental data corruption during system power transitions. The 1 million cycle endurance and 40-year data retention ensure long-term reliability for industrial and automotive applications. The Schmitt-trigger and filtered inputs provide noise suppression on the I2C bus. The self-timed write cycle automatically erases and programs the page within 5ms. Two address pins (A0, A1) allow up to four devices on the same I2C bus for a total of 4Mbit. Packaged in SOIJ-8 rated for -40C to +85C.

Working Principle: AT24CM01-SHD-B Working Principle

The AT24CM01 uses a standard I2C protocol with 7-bit device address (1010A1A0P0 for 1Mbit, where P0 is the MSB of the 17-bit word address). Write operations begin with a START condition, device address byte (R/W=0), two address bytes (16 bits, with P0 in the device address), then up to 256 data bytes. The internal address counter increments with each data byte, wrapping within the 256-byte page boundary at page edges. A STOP condition initiates the self-timed internal write cycle (5ms max). Read operations use current-address, random, or sequential read modes. Sequential reads can cross page boundaries, reading the entire memory continuously. The WP pin, when connected to VCC, disables all write operations, providing hardware data protection. The I2C interface uses open-drain SDA output with clock stretching capability during internal write cycles.

Pin Description: AT24CM01-SHD-B Pin Definition and Functions
Pin Mnemonic Description
1 A0 Address input 0
2 A1 Address input 1
3 NC No connect
4 GND Ground
5 SDA Serial data (I2C)
6 SCL Serial clock (I2C)
7 WP Write protect (active high)
8 VCC Supply voltage
Application Scenarios: In which products and applications is AT24CM01-SHD-B used
  • Industrial PLC parameter and calibration storage with 1M cycle endurance
  • Consumer electronics user settings and firmware configuration at 1MHz I2C
  • Medical device patient data and calibration with hardware write-protect
  • IoT sensor node calibration coefficients with 1.7V low-power operation
Alternative Models: What chips are recommended as replacements for AT24CM01-SHD-B
Model Manufacturer Key Difference
AT24CM01-SSHM-T Microchip TSSOP-8, tape reel
AT24C512C Microchip 512Kbit, smaller
24LC1025 Microchip 1Mbit, older series
BR24G128 Rohm Similar 1Mbit EEPROM

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1