Opens in a new tab

Home » Integrated Circuits ICs » AT24CM01-SSHD-T

AT24CM01-SSHD-T

1Mb I2C Serial EEPROM, 128Kx8, 1MHz, 8-SOIC 150mil

5621

Effective Inventory

Image for reference only

Manufacturer Part:

AT24CM01-SSHD-T

Package:

8-SOIC (3.90 x 4.93 x 1.48 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Microchip AT24CM01-SSHD-T is a 1Mb I2C Serial EEPROM organized as 128K x 8, housed in an 8-SOIC (150 mil) package. It operates from 2.5V to 5.5V (with a 1.7V-5.5V extended range variant) with a maximum clock frequency of 1MHz. The device features a 256-byte page write mode, hardware write-protection via the WP pin, 1 million erase/write cycle endurance, and 100-year data retention. It is rated for the industrial temperature range of -40°C to +85°C.

Key Specifications

Density 1 Mbit (128K x 8)
Interface I2C
Max Clock Frequency 1 MHz
Operating Voltage 2.5V to 5.5V
Page Size 256 bytes
Write Cycle Time 5 ms max
Endurance 1,000,000 write cycles
Data Retention 100 years
Operating Temperature -40°C to +85°C
Package 8-SOIC (150 mil, 3.90mm width)

Features

  • 1Mb I2C serial EEPROM with 128K x 8 organization
  • High-speed I2C interface up to 1MHz
  • 256-byte page write mode for efficient data updates
  • Hardware write-protect pin for full array protection
  • Self-timed write cycle (5ms max)
  • Random and sequential read operations
  • More than 1 million erase/write cycles
  • 100-year data retention
  • Two device address pins for up to 4 devices on one bus
  • Factory programming available

Applications

  • Industrial control and automation systems
  • Consumer electronics data storage
  • Telecommunications equipment configuration
  • Medical device calibration and settings
  • Automotive infotainment and body electronics
Product Introduction: AT24CM01-SSHD-T Product Introduction

The Microchip AT24CM01-SSHD-T is a 1Mb I2C serial EEPROM providing reliable non-volatile storage for applications requiring moderate data capacity. Organized as 128K x 8 bits, the device supports high-speed I2C communication up to 1MHz with 256-byte page write capability for efficient data updates. Hardware write protection via the WP pin safeguards the entire memory array against inadvertent writes. The AT24CM01 is available in a standard 8-SOIC package and is suitable for industrial, consumer, and automotive applications where dependable data storage is essential.

Working Principle: AT24CM01-SSHD-T Working Principle

The AT24CM01-SSHD-T communicates via the I2C two-wire serial protocol. 1) I2C Interface Subsystem: The SDA (data) and SCL (clock) pins support standard (100kHz), fast (400kHz), and high-speed (1MHz) modes. Device addressing uses a 7-bit address with two configurable address pins allowing up to four devices on a single bus. 2) Memory Array Subsystem: The 1Mb EEPROM array is organized as 128K x 8 bits with 256-byte page boundaries for efficient write operations. 3) Write Protection Subsystem: The WP pin provides hardware data protection for the entire array when driven high; a status register provides software write protection. 4) Write Cycle Subsystem: Upon receiving a write command, the device executes a self-timed internal programming cycle completing within 5ms, during which the inputs are disabled and acknowledge polling can be used to detect completion.

Pin Description: AT24CM01-SSHD-T Pin Definition and Functions
Pin Name Type Function
1 A0 Input Device address bit 0
2 A1 Input Device address bit 1
3 VSS Power Ground
4 SDA I/O Serial data/address (open-drain)
5 SCL Input Serial clock
6 WP Input Write protect (active-high protects full array)
7 NC – No connect (A2 internally tied)
8 VCC Power Supply voltage (2.5-5.5V)
Application Scenarios: In which products and applications is AT24CM01-SSHD-T used
  • Industrial Automation: Configuration storage and calibration data
  • Consumer Electronics: User preference and channel settings
  • Telecommunications: Network equipment parameter storage
  • Medical Devices: Patient calibration and device settings
  • Automotive: Infotainment system and body controller data
Alternative Models: What chips are recommended as replacements for AT24CM01-SSHD-T
Manufacturer Part Number Package Notes
Microchip AT24CM02-SSHD-T SOIC-8 2Mb, same family, double density
ST M24M01-RMN6TP TSSOP-8 1Mb I2C EEPROM, similar function
ROHM BR24G1M-3TE2 TSSOP-8 1Mb I2C EEPROM
onsemi CAT24M01 TSSOP-8 1Mb I2C EEPROM
Microchip AT24CM01-SHM-T SOIJ-8 Same function, wide SOIC package

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1