Opens in a new tab

Home » Integrated Circuits ICs » AT25256B-SSHL-B

AT25256B-SSHL-B

256Kb SPI Serial EEPROM, 32Kx8, 20MHz, 1.8-5.5V, SOIC-8

11287

Effective Inventory

Image for reference only

Manufacturer Part:

AT25256B-SSHL-B

Package:

8-SOIC (4.98 x 3.99 x 1.48 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Microchip AT25256B-SSHL-B is a 256Kb SPI Serial EEPROM organized as 32K x 8, housed in an 8-pin SOIC (150 mil) package. Operating from 1.8V to 5.5V with a 20MHz maximum clock frequency, it supports SPI modes 0 and 3. The device features block write protection (1/4, 1/2, or entire array), hardware write protect and HOLD pins, self-timed write cycles (5ms max), 1 million erase/write cycle endurance, and 100-year data retention. It is available in both industrial (-40°C to +85°C) and automotive grade (-40°C to +125°C) versions.

Key Specifications

Density 256 Kbit (32K x 8)
Interface SPI (modes 0 and 3)
Max Clock Frequency 20 MHz
Operating Voltage 1.8V to 5.5V
Page Size 64 bytes
Write Cycle Time 5 ms max (self-timed)
Endurance 1,000,000 write cycles
Data Retention 100 years
Operating Temperature -40°C to +85°C (industrial)
Package 8-SOIC (150 mil, 3.90mm width)

Features

  • 256Kb SPI serial EEPROM with 32K x 8 organization
  • Supports SPI modes 0 and 3
  • Up to 20MHz clock frequency
  • Block write protection: 1/4, 1/2, or entire array
  • Hardware write protect pin and write disable instructions
  • HOLD pin for suspending serial communication
  • Self-timed write cycle (5ms max)
  • More than 1 million erase/write cycles
  • 100-year data retention
  • Available in industrial and AEC-Q100 automotive grades

Applications

  • Industrial and commercial systems
  • Automotive electronics (AEC-Q100 qualified)
  • Consumer electronics configuration storage
  • Medical device calibration and data logging
  • Embedded system parameter retention
Product Introduction: AT25256B-SSHL-B Product Introduction

The Microchip AT25256B-SSHL-B is a 256Kb Serial EEPROM utilizing the industry-standard SPI compatible serial bus. Organized as one block of 32,768 x 8 bits, the device is optimized for consumer electronics, industrial, medical, and automotive applications where reliable nonvolatile memory storage is essential. Software write protection allows protecting 1/4, 1/2, or the entire memory array, while a hardware write protect pin provides additional security. The HOLD pin enables suspending serial communication without resetting the sequence. Available in industrial and AEC-Q100 qualified automotive grades.

Working Principle: AT25256B-SSHL-B Working Principle

The AT25256B-SSHL-B communicates via the SPI serial bus. 1) SPI Interface Subsystem: CS, SCK, SI, and SO pins implement SPI modes 0 and 3 with clock speeds up to 20MHz. 2) Memory Array Subsystem: The 256Kb EEPROM array is organized as 32K x 8 with 64-byte pages for efficient write operations. 3) Write Protection Subsystem: The status register configures block protection (1/4, 1/2, or full array); the WP pin provides hardware protection for the status register. 4) Communication Control Subsystem: The HOLD pin allows the master to suspend an ongoing serial transfer to perform higher-priority tasks, resuming later without data loss.

Pin Description: AT25256B-SSHL-B Pin Definition and Functions
Pin Name Type Function
1 CS Input Chip select (active-low)
2 SO Output Serial data output (MISO)
3 WP Input Write protect (active-low protects status register)
4 VSS Power Ground
5 SI Input Serial data input (MOSI)
6 SCK Input Serial clock
7 HOLD Input Suspend communication (active-low)
8 VCC Power Supply voltage (1.8-5.5V)
Application Scenarios: In which products and applications is AT25256B-SSHL-B used
  • Industrial Systems: PLC parameter storage and factory automation
  • Automotive: AEC-Q100 qualified for in-vehicle electronics
  • Consumer: Feature configuration and preference storage
  • Medical: Device calibration and patient settings retention
  • Embedded: Boot code and serial number storage
Alternative Models: What chips are recommended as replacements for AT25256B-SSHL-B
Manufacturer Part Number Package Notes
Microchip AT25128B-SSHL-B SOIC-8 128Kb, same family, half density
Microchip AT25512-NSH-B SOIC-8 512Kb, same family, double density
ST M95256-WMN6TP TSSOP-8 256Kb SPI EEPROM
onsemi CAT25256 SOIC-8 256Kb SPI EEPROM, compatible
ROHM BR25H256 SOIC-8 256Kb SPI EEPROM

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1