Opens in a new tab

AT89C51RD2-RLTUM

80C51 8-bit MCU, 60MHz, 64KB ISP Flash, 1792B XRAM, SPI, 44-VQFP

8280

Effective Inventory

Image for reference only

Manufacturer Part:

AT89C51RD2-RLTUM

Package:

VQFP-44 (10.00 x 10.00 x 1.20 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AT89C51RD2-RLTUM from Microchip Technology is an 80C51-compatible 8-bit microcontroller with 64 KB ISP Flash, 1792 bytes XRAM, and SPI interface in a 44-pin VQFP package. Running at up to 60 MHz, it offers in-system programming, X2 speed mode, and a programmable counter array for versatile embedded control.

Key Specifications

Core 80C51 @ 60 MHz
Flash Memory 64 KB (ISP capable)
SRAM 256 bytes + 1792 bytes XRAM
Operating Voltage 2.7 V to 5.5 V
Timers 3 x 16-bit + PCA
Communication UART, SPI
I/O Pins 34
Package 44-VQFP (10 x 10 mm)

Features

  • 80C51 core compatible with industry-standard instruction set
  • 64 KB Flash with in-system and in-application programming
  • 1792 bytes of extended RAM (XRAM) for data buffering
  • X2 Mode doubles throughput at same crystal frequency
  • Programmable Counter Array (PCA) for PWM and capture
  • Hardware watchdog timer and dual data pointers

Applications

  • Industrial control and automation
  • Consumer electronics and appliances
  • Automotive body electronics
  • Communication adapters and protocol converters
  • Embedded instrumentation and data logging
Product Introduction: AT89C51RD2-RLTUM Product Introduction

The AT89C51RD2-RLTUM is a high-performance 80C51-compatible 8-bit microcontroller from Microchip Technology featuring 64 KB of in-system programmable Flash memory and 1792 bytes of extended RAM in a compact 44-pin VQFP package. The device extends the standard 80C52 architecture with a Programmable Counter Array (PCA) for flexible PWM generation and input capture, a hardware watchdog timer, dual data pointers for faster memory operations, and an SPI interface for serial peripheral communication. The X2 speed mode doubles the CPU throughput at a given crystal frequency by reducing each machine cycle from 12 to 6 oscillator periods, enabling up to 60 MHz equivalent performance from a 30 MHz crystal. The Flash memory supports both in-system programming (ISP) and in-application programming (IAP), allowing firmware updates without removing the device from the board.

Working Principle: AT89C51RD2-RLTUM Working Principle

The AT89C51RD2 executes the industry-standard 80C51 instruction set with an 8-bit CPU core and 256 bytes of internal RAM. In standard mode, each machine cycle requires 12 oscillator periods, while the X2 mode reduces this to 6 periods, effectively doubling throughput. The 64 KB Flash is organized as a unified code/data space and supports byte-level and page-level programming. The ISP feature uses a built-in bootloader that communicates via UART to receive programming commands and data, enabling field firmware updates. The PCA module provides five capture/compare modules, each configurable for 16-bit capture, 16-bit software timer, high-speed output, or 8-bit PWM mode. The SPI interface operates in master or slave mode at up to half the oscillator frequency. Dual DPTR registers allow faster block data moves between memory regions.

Pin Description: AT89C51RD2-RLTUM Pin Definition and Functions
Pin Group Count Function
VDD/VSS 4 Power supply and ground
PORT0 (P0.0-P0.7) 8 Open-drain I/O, multiplexed address/data bus
PORT1 (P1.0-P1.7) 8 PCA I/O, SPI pins, general I/O
PORT2 (P2.0-P2.7) 8 Address bus high byte, general I/O
PORT3 (P3.0-P3.7) 8 UART RX/TX, timer I/O, INT0/INT1, WR/RD
EA/VPP 1 External access enable / programming voltage
PSEN 1 Program store enable output
ALE/PROG 1 Address latch enable / programming pulse
RST 1 Reset input
XTAL1/XTAL2 2 Crystal oscillator connections
Application Scenarios: In which products and applications is AT89C51RD2-RLTUM used
  • Industrial Protocol Conversion: Serial protocol bridging between UART, SPI, and parallel bus systems
  • Motor Speed Control: PCA-based PWM generation for brushed DC motor drives
  • Consumer Appliance Control: Washing machine and dishwasher controller with timer and UART communication
  • Field-Updatable Devices: ISP-capable firmware updates for remote-installed equipment
  • Data Acquisition: Multi-channel analog sensor reading with SPI ADC and UART host communication
Alternative Models: What chips are recommended as replacements for AT89C51RD2-RLTUM
Model Manufacturer Flash RAM Speed Package Notes
AT89C51ED2-RLTUM Microchip 64 KB 2048 B 60 MHz VQFP-44 More XRAM, EEPROM
PIC18F4520-I/PT Microchip 32 KB 1536 B 40 MHz TQFP-44 PIC18 alternative
AT89S52-24AU Microchip 8 KB 256 B 33 MHz TQFP-44 Smaller Flash, simpler
C8051F340-GQ Silicon Labs 64 KB 4352 B 48 MHz TQFP-48 8051 with USB
STC89C52RC STC 8 KB 512 B 35 MHz LQFP-44 Cost-effective 8051

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1