Opens in a new tab

Home » Integrated Circuits ICs » AT93C46EN-SH-B

AT93C46EN-SH-B

1Kbit Microwire EEPROM, 2MHz, 1.8-5.5V, 8/16-bit config, SOIC-8

8634

Effective Inventory

Image for reference only

Manufacturer Part:

AT93C46EN-SH-B

Package:

8-SOIC (4.9 x 3.9 x 1.25 mm, SN package)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AT93C46EN-SH-B from Microchip is a 1Kbit (128×8 or 64×16) Microwire serial EEPROM with 2MHz clock rate, 1 million erase/write cycles, and 100-year data retention in an 8-pin SOIC package.

Key Specifications

Memory Size 1 Kbit (128 x 8 or 64 x 16)
Interface Microwire (3-wire serial: CS, SK, DI/DO)
Organization Configurable: 8-bit or 16-bit
Clock Frequency 2 MHz (max)
Supply Voltage 1.8V to 5.5V
Write Cycle Time 5 ms (max)
Erase/Write Endurance 1,000,000 cycles
Data Retention 100 years
Write Protect Yes (protect upper quarter)
Package 8-SOIC (3.9mm width)
Operating Temperature -40 to +85 C

Features

  • Industry-standard Microwire bus interface
  • Configurable 8-bit or 16-bit organization (ORG pin)
  • Self-timed write cycle with auto-erase
  • Hardware write protect for upper quarter
  • 1 million erase/write cycle endurance
  • 100-year data retention

Applications

  • Configuration parameter storage
  • Calibration data storage
  • Serial number storage
  • Small data logging
Product Introduction: AT93C46EN-SH-B Product Introduction

The AT93C46EN-SH-B from Microchip is a 1Kbit Microwire serial EEPROM organized as either 128 words of 8 bits each or 64 words of 16 bits each, selectable via the ORG (organization) pin. The device uses the industry-standard 3-wire Microwire serial bus (CS, SK, DI/DO) for communication, making it compatible with a wide range of microcontrollers and ASICs. The Microwire protocol is a synchronous serial interface where the master provides the clock (SK), chip select (CS), and data input (DI) signals, while the EEPROM provides data output (DO). The AT93C46 supports all standard EEPROM operations: READ, WRITE, ERASE, ERAL (erase all), WRAL (write all), and EWEN/EWDS (enable/disable writing). The write cycle is self-timed with automatic erase-before-write, requiring only 5ms maximum per write cycle. The ORG pin allows the designer to choose between 8-bit and 16-bit data word organization without changing the software protocol; when ORG is tied to VCC, the device operates in 16-bit mode (64 words x 16 bits); when ORG is tied to GND, it operates in 8-bit mode (128 words x 8 bits). The hardware write protect feature (protect pin) prevents accidental writes to the upper quarter of the memory array, protecting critical configuration data. With 1 million erase/write cycle endurance and 100-year data retention, the AT93C46 is suitable for storing calibration constants, configuration parameters, and serial numbers in industrial and consumer applications.

Working Principle: AT93C46EN-SH-B Working Principle

The AT93C46EN-SH-B operates as a Microwire serial EEPROM. Key subsystems include: (1) Microwire Interface – a synchronous serial protocol where CS (chip select) enables the device; SK (serial clock) synchronizes data transfer; DI (data in) receives commands and data from the master; DO (data out) sends data back to the master; each operation begins with a start bit (1), followed by an opcode (2 bits), address (6 or 7 bits depending on organization), and data; (2) Instruction Set – READ (opcode 10): reads data from specified address; ERASE (opcode 11): erases the specified address; WRITE (opcode 01): writes data to specified address after auto-erase; ERAL (opcode 00+10): erases all addresses; WRAL (opcode 00+01): writes same data to all addresses; EWEN (opcode 00+11): enables writing; EWDS (opcode 00+00): disables writing; (3) Self-Timed Write – when a WRITE or ERASE command is received, the device internally generates the high voltage needed for programming; the write cycle takes 5ms maximum; the BUSY/READY status can be checked by polling CS; (4) Organization Select – the ORG pin selects between x8 and x16 modes at power-up; in x8 mode, addresses are 7 bits (A6-A0) accessing 128 bytes; in x16 mode, addresses are 6 bits (A5-A0) accessing 64 words; (5) Write Protect – when the protect pin is asserted, the upper quarter of the memory (addresses 96-127 in x8 mode or 48-63 in x16 mode) is write-protected, preventing accidental modification of critical data.

Pin Description: AT93C46EN-SH-B Pin Definition and Functions
Pin Name Function
1 CS Chip select (active high)
2 SK Serial clock input
3 DI Data input (from master)
4 DO Data output (to master)
5 GND Ground
6 ORG Organization select (VCC=x16, GND=x8)
7 NC/PROTECT No connect or write protect (version dependent)
8 VCC Supply voltage (1.8V to 5.5V)
Application Scenarios: In which products and applications is AT93C46EN-SH-B used
  • Sensor calibration: store 128 bytes of calibration coefficients for a pressure sensor with 100-year retention
  • Configuration storage: 64 x 16-bit words for MCU startup parameters and user settings
  • Serial number: store unique device ID with write-protect on upper quarter to prevent modification
  • Small data log: 1Kbit of non-volatile storage for event counters and fault records
Alternative Models: What chips are recommended as replacements for AT93C46EN-SH-B
Manufacturer Part Number Package Notes
Microchip AT93C46D-SSHM-B SOIC-8 2.5V-5.5V version
ST M93C46-WMN6 SOIC-8 ST equivalent Microwire EEPROM
onsemi CAT93C46VI-G SOIC-8 onsemi equivalent
Microchip AT93C56B-SSHM-B SOIC-8 2Kbit version (double capacity)

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1