Opens in a new tab

Home » Integrated Circuits ICs, Sensors » ATM90E36A-AU-R

ATM90E36A-AU-R

3-phase energy metering IC, 0.1% accuracy, 24-bit ADC, 31st harmonic analysis, SPI interface in TQFP-48

8870

Effective Inventory

Image for reference only

Manufacturer Part:

ATM90E36A-AU-R

Package:

TQFP-48 (7.00 x 7.00 x 1.00 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ATM90E36A-AU-R from Microchip (Atmel) is a high-precision three-phase energy metering IC in a TQFP-48 (7x7mm) package. It features 24-bit sigma-delta ADCs with 0.1% active energy accuracy, supports 3-phase + neutral measurement, and includes harmonic analysis up to the 31st order.

Key Specifications

Measurement Channels 3-phase + neutral (7 ADC channels)
Active Energy Accuracy 0.1 class
Reactive Energy Accuracy 0.5 class
ADC Resolution 24-bit
Sampling Rate 8kHz per channel
Interface SPI (up to 3.5MHz)
Supply Voltage 3.3V (Single Supply)
Harmonic Analysis Up to 31st harmonic
Package TQFP-48 (7.00 x 7.00mm)
Operating Temperature -40°C ~ +85°C

Features

  • Ultra-high accuracy active energy measurement (0.1 class)
  • Simultaneous 3-phase + neutral voltage and current sampling
  • 24-bit sigma-delta ADCs for wide dynamic range
  • Built-in DSP for real-time harmonic analysis up to 31st order
  • Active, reactive, and apparent power measurement
  • Voltage and current RMS measurement
  • Programmable gain amplifiers for current sensor interfaces
  • SPI interface for host MCU communication

Applications

  • Three-phase smart electricity meters
  • Industrial power quality analyzers
  • Energy management and sub-metering systems
  • Demand response controllers
  • Distribution grid monitoring equipment
Product Introduction: ATM90E36A-AU-R Product Introduction

The ATM90E36A-AU-R from Microchip Technology (formerly Atmel) is a high-precision polyphase energy measurement IC designed for smart metering and power quality monitoring. It integrates seven 24-bit sigma-delta ADC channels that simultaneously sample three-phase voltages and currents plus a neutral channel. The on-chip DSP performs real-time computation of active, reactive, and apparent power and energy with class 0.1 accuracy. The device includes advanced features such as harmonic analysis up to the 31st order. A programmable gain amplifier stage accommodates various current sensor types including shunt resistors, current transformers, and Rogowski coils. The -R suffix indicates tape and reel packaging.

Working Principle: ATM90E36A-AU-R Working Principle

The ATM90E36A operates through three main processing stages: (1) The analog front-end consists of seven 24-bit sigma-delta ADCs with programmable gain amplifiers. Three voltage channels and four current channels are sampled simultaneously at 8kHz per channel. (2) The digital signal processing engine computes RMS values of voltage and current, active power, reactive power, apparent power, and power factor for each phase. Energy accumulation registers integrate power over time. The harmonic analysis engine performs FFT-based decomposition up to the 31st harmonic order. (3) Calibration and compensation circuits correct for gain errors, phase errors between channels, and DC offset. All measurement results are accessible through the SPI register interface.

Pin Description: ATM90E36A-AU-R Pin Definition and Functions
Pin Name Function
1 IAP Phase A current positive input
2 IAN Phase A current negative input
3-4 IBP/IBN Phase B current differential input
5-6 ICP/ICN Phase C current differential input
7-8 INP/INN Neutral current differential input
9-10 VAP/VAN Phase A voltage differential input
11-12 VBP/VBN Phase B voltage differential input
13-14 VCP/VCN Phase C voltage differential input
15 AVDD Analog supply (3.3V)
16 AGND Analog ground
17 DVDD Digital supply (3.3V)
19 XSCK SPI clock input
20 MOSI SPI data input
21 MISO SPI data output
22 CS SPI chip select
Application Scenarios: In which products and applications is ATM90E36A-AU-R used
  • Three-Phase Smart Meter: Class 0.1 active energy accuracy meets IEC 62053-22 requirements; 31st harmonic analysis enables power quality reporting
  • Industrial Power Quality Analyzer: Simultaneous 3-phase + neutral sampling captures unbalanced loads and harmonic distortion
  • Data Center PDU Metering: Per-outlet energy measurement with harmonic analysis identifies inefficient IT equipment
  • Solar Inverter Monitoring: Measures grid-tied inverter output power quality including harmonic content for regulatory compliance
Alternative Models: What chips are recommended as replacements for ATM90E36A-AU-R
Model Manufacturer Key Difference
ATM90E26ASU Microchip Single-phase version, 0.1 class, TSSOP-28
ADE7878A ADI 3-phase, 0.1 class, 24-bit, I2C/SPI
ADE7758 ADI 3-phase, 0.1 class, 20-bit ADC
MCP3919 Microchip 6-channel, 24-bit ADC, no DSP
MAX78615+LMU ADI Single-phase, with ARM core

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1