Opens in a new tab

ATmega4809-AU

8-bit AVR MCU, 48KB Flash, 6KB SRAM, Event System, TQFP-48

6789

Effective Inventory

Image for reference only

Manufacturer Part:

ATmega4809-AU

Package:

TQFP-48 (7 x 7 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ATmega4809-AU from Microchip Technology is an 8-bit AVR microcontroller with 48KB Flash, 6KB SRAM, 41 I/O pins, and 12-channel 10-bit ADC in a TQFP-48 package.

Key Specifications

Type 8-bit AVR Microcontroller
Max Frequency 20 MHz
Flash 48 KB
SRAM 6 KB
EEPROM 256 bytes
I/O Pins 41
ADC 12 channels x 10-bit
Communication 1x USART, 1x SPI, 1x TWI (I2C)
Timers 4 (1x TCB + 1x TCA + 2x TCD)
PWM 6 channels
Event System Yes
Supply Voltage 1.8V to 5.5V
Package TQFP-48 (7 x 7 mm)
Operating Temperature -40C to +85C

Features

  • 48KB Flash and 6KB SRAM
  • Event system for peripheral interconnection without CPU
  • Configurable Custom Logic (CCL)
  • Single-cycle I/O access
  • Peripheral Touch Controller (PTC) for capacitive sensing
  • UPDI programming interface

Applications

  • Embedded control systems
  • Capacitive touch interfaces
  • IoT sensor nodes
  • Home automation
Product Introduction: ATmega4809-AU Product Introduction

The ATmega4809-AU from Microchip Technology is a modern 8-bit AVR microcontroller from the megaAVR 0-series, offering 48KB Flash and 6KB SRAM in a TQFP-48 package. The device introduces advanced features not found in classic AVR devices: an Event System that allows peripherals to communicate directly without CPU intervention, Configurable Custom Logic (CCL) that implements glue logic in hardware, and a Peripheral Touch Controller (PTC) for capacitive sensing without external components. The UPDI (Unified Program and Debug Interface) single-pin programming interface simplifies board design. The 41 I/O pins provide extensive connectivity, while the 12-channel 10-bit ADC supports multi-sensor applications. The 6KB SRAM is significantly larger than classic ATmega devices, enabling more complex algorithms and communication buffers.

Working Principle: ATmega4809-AU Working Principle

The ATmega4809 uses an enhanced AVR 8-bit RISC architecture where most instructions execute in a single clock cycle at 20 MHz. The CPU accesses I/O registers in a single cycle, providing deterministic peripheral control. The Event System is a 6-channel routing network that connects event generators (timer overflows, pin changes, ADC completions) to event users (timer inputs, DMA triggers, CCL inputs) without software intervention, enabling real-time response with zero CPU overhead. The CCL implements programmable combinational and sequential logic (LUTs with optional flip-flops) that can replace external glue logic ICs. The PTC performs capacitive touch sensing by measuring the charge transfer between the sensor pad and an internal sampling capacitor, providing touch detection without external components. The UPDI interface uses a single-wire bidirectional protocol for programming and debugging, replacing the 4-wire ISP interface of classic AVR devices.

Pin Description: ATmega4809-AU Pin Definition and Functions
Pin Group Name Type Function
Multiple PA0-PA7, PB0-PB7, etc. I/O 41 programmable digital I/O pins
Analog AIN0-AIN11 Input 12 ADC input channels
Serial TXD/RXD I/O USART serial port
Serial MOSI/MISO/SCK/SS I/O SPI port
Serial SDA/SCL I/O TWI/I2C port
Debug UPDI I/O Single-pin programming/debug
Power VDD/VSS Power Supply and ground
Application Scenarios: In which products and applications is ATmega4809-AU used
  • Smart home thermostat with PTC capacitive touch buttons and 6KB SRAM for Wi-Fi buffer
  • IoT sensor node with Event System for autonomous ADC-to-UART data streaming
  • Industrial panel controller with CCL replacing external logic for LED multiplexing
  • Motor control application with 6-channel PWM and 48KB Flash for FOC algorithm
Alternative Models: What chips are recommended as replacements for ATmega4809-AU
Manufacturer Part Number Package Notes
Microchip ATmega4808-AU TQFP-32 Same core, fewer pins (28 I/O)
Microchip ATmega3209-AU TQFP-48 32KB Flash, lower cost
Microchip ATmega2560-AU TQFP-100 Classic AVR, 256KB Flash, more I/O
ST STM32G070CBT6 LQFP-48 32-bit ARM, similar pin count
Renesas R7FA2E1A72DFK LQFP-48 RA2E1 ARM Cortex-M23, 128KB

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1