Opens in a new tab

ATMEGA8A-PU

8-bit AVR MCU, 8KB Flash, 1KB SRAM, 16MHz, PDIP-28, Arduino-compatible

6200

Effective Inventory

Image for reference only

Manufacturer Part:

ATMEGA8A-PU

Package:

PDIP-28 / PU-28 (36.7 x 8.89 mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ATMEGA8A-PU from Microchip Technology (formerly Atmel) is an 8-bit AVR RISC microcontroller with 8KB ISP Flash, 1KB SRAM, and 512B EEPROM in a PDIP-28 through-hole package. Running at up to 16MHz at 5V, it features 6-channel 10-bit ADC, two 8-bit and one 16-bit timer, USART, SPI, and I2C interfaces.

Key Specifications

Core 8-bit AVR RISC
Max Clock Frequency 16 MHz
Flash Memory 8 KB (ISP programmable)
SRAM 1 KB
EEPROM 512 Bytes
I/O Pins 23
ADC 6-channel 10-bit (PDIP package)
Timers 2 x 8-bit + 1 x 16-bit
Communication USART, SPI (master/slave), I2C
PWM Channels 3
Supply Voltage 2.7V to 5.5V (ATmega8A)
Active Current 3.6 mA @ 5V, 4MHz
Power-Down Current 1 uA @ 3V
Operating Temperature -40 to 85 C
Package PDIP-28 (PU suffix)

Features

  • High-performance 8-bit AVR RISC architecture
  • 130 powerful instructions, most single-clock cycle execution
  • 8KB ISP Flash with 10,000 erase/write cycles
  • 512B EEPROM with 100,000 erase/write cycles
  • 1KB internal SRAM
  • Up to 16 MIPS throughput at 16MHz
  • 6-channel 10-bit ADC
  • USART, SPI, and Two-Wire (I2C) serial interfaces
  • Programmable watchdog timer with on-chip oscillator
  • On-chip analog comparator
  • Dual programmable serial USART
  • Master/slave SPI serial interface
  • Calibrated internal RC oscillator

Applications

  • Arduino and hobbyist projects
  • Industrial control and automation
  • Motor control and drive systems
  • Sensor data acquisition
  • Consumer electronics and home appliances
Product Introduction: ATMEGA8A-PU Product Introduction

The ATMEGA8A-PU from Microchip is an 8-bit AVR RISC microcontroller in PDIP-28 with 8KB ISP Flash, 1KB SRAM, and 512B EEPROM. Runs at up to 16MHz with 16 MIPS throughput. Features 6-channel 10-bit ADC, USART, SPI, I2C, and three timers (2×8-bit + 1×16-bit). 23 I/O pins with PDIP-28 through-hole package ideal for prototyping and Arduino-compatible designs. 2.7-5.5V supply with only 1uA power-down current.

Working Principle: ATMEGA8A-PU Working Principle

The ATmega8A uses the AVR enhanced RISC architecture with 130 instructions, most executing in a single clock cycle. The Harvard architecture separates program memory (Flash) and data memory (SRAM) with separate buses, enabling simultaneous instruction fetch and data access. The 16-bit program counter addresses the 8KB Flash. Peripherals are memory-mapped into the I/O space and accessed via IN/OUT instructions or direct addressing. The 10-bit SAR ADC uses successive approximation with auto-triggering from timer compare matches. ISP (In-System Programming) allows Flash and EEPROM programming via the SPI interface without removing the device from the circuit. The A suffix version operates from 2.7-5.5V at 0-16MHz.

Pin Description: ATMEGA8A-PU Pin Definition and Functions
Pin Name Alt Function Function
1 PC6 RESET# Reset input (active low)
2 PD0 RXD Port D bit 0 / USART receive
3 PD1 TXD Port D bit 1 / USART transmit
4 PD2 INT0 Port D bit 2 / External interrupt 0
5 PD3 INT1/OC2 Port D bit 3 / Ext interrupt 1 / Timer2 PWM
6 PD4 T0/XCK Port D bit 4 / Timer0 clock / USART clock
7 VCC – Digital supply voltage
8 GND – Ground
9 PB6 XTAL1/TOSC1 Port B bit 6 / Crystal oscillator input
10 PB7 XTAL2/TOSC2 Port B bit 7 / Crystal oscillator output
11-17 PD5-PD7, PB0-PB3 Various Port D/B with timer/PWM/SPI/ADC
18-24 PC0-PC6 ADC0-ADC5/SCL/SDA Port C with ADC and I2C
25-28 ADC6,ADC7,PB4,PB5 ADC, SPI ADC inputs and SPI
Application Scenarios: In which products and applications is ATMEGA8A-PU used
  • Arduino-compatible prototyping board with PDIP-28 socket
  • Motor speed controller with PWM and ADC feedback
  • Temperature monitoring and control with I2C sensors
  • RS-232 serial communication bridge via USART
  • Home automation sensor node with SPI radio
Alternative Models: What chips are recommended as replacements for ATMEGA8A-PU
Manufacturer Part Number Package Notes
Microchip ATMEGA328P-PU PDIP-28 32KB Flash, pin-compatible upgrade
Microchip ATMEGA8A-AU TQFP-32 SMD version with 2 extra ADC channels
Microchip ATMEGA48A-PU PDIP-28 4KB Flash, lower cost alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1