Opens in a new tab

ATSAMD21J18A-AUT

Cortex-M0+ MCU, 48MHz, 256KB Flash, USB, TQFP-64

231000

Effective Inventory

Image for reference only

Manufacturer Part:

ATSAMD21J18A-AUT

Package:

64-TQFP (10 x 10 x 1.0 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ATSAMD21J18A-AUT from Microchip Technology is a low-power 32-bit Cortex-M0+ MCU at 48MHz with 256KB Flash, 32KB SRAM, USB, and rich analog in 64-pin TQFP package.

Key Specifications

Core Arm Cortex-M0+ @ 48MHz
Flash Memory 256 KB
SRAM 32 KB
ADC 20-channel x 12-bit, 350ksps, PGA 1/2x-16x
DAC 1 x 10-bit, 350ksps
SERCOM 6 (configurable as USART/SPI/I2C/LIN)
USB Full-Speed 2.0 Device/Host (8 endpoints)
Timers 5x TC (16-bit) + 4x TCC (24-bit with PWM)
Touch PTC with 256-channel capacitive sensing
DMA 12-channel DMAC
Supply Voltage 1.62 V to 3.63 V
GPIO 52 pins
Package 64-TQFP (AUT suffix, 10x10mm)
Operating Temperature -40 to +85 C

Features

  • Ultra-low-power Cortex-M0+ with SleepWalking peripherals
  • 6 SERCOM modules configurable as UART, SPI, or I2C
  • 12-bit ADC with programmable gain amplifier and hardware oversampling Full-Speed USB 2.0 with embedded host and device 256-channel capacitive touch sensing with proximity detection

Applications

  • IoT sensor nodes with USB connectivity
  • Home automation and smart devices
  • Capacitive touch user interfaces
  • Portable medical instruments
  • Industrial metering and data logging
Product Introduction: ATSAMD21J18A-AUT Product Introduction

The ATSAMD21J18A-AUT from Microchip Technology is a low-power, high-performance 32-bit microcontroller based on the Arm Cortex-M0+ processor running at 48MHz. The device features 256KB Flash, 32KB SRAM, 6 SERCOM modules (each configurable as USART, SPI, or I2C), full-speed USB 2.0 with embedded host and device, 20-channel 12-bit ADC with programmable gain amplifier and hardware oversampling up to 16-bit effective resolution, 10-bit DAC, 12-channel DMA, and 256-channel capacitive touch sensing. The SleepWalking peripheral architecture allows peripherals to operate in standby mode, waking the CPU only when a condition is met. The AUT suffix denotes 64-pin TQFP package with industrial temperature range and tape and reel.

Working Principle: ATSAMD21J18A-AUT Working Principle

The ATSAMD21J18A-AUT operates as a low-power Cortex-M0+ microcontroller with flexible peripheral configuration. (1) The Cortex-M0+ core executes instructions at 48MHz with single-cycle hardware multiplier and Micro Trace Buffer (MTB) for debug trace. The internal clock system includes 48MHz DFLL (Digital Frequency Locked Loop) and 48-96MHz FDPLL (Fractional Digital PLL), allowing operation from internal oscillators without external crystals. The SleepWalking architecture enables peripherals to remain partially active in standby mode, triggering interrupts only when specific conditions are met. (2) The 6 SERCOM modules provide extreme flexibility: each can be independently configured as USART (full/half duplex, LIN slave), SPI (up to 30MHz master), or I2C (up to 3.4MHz, SMBus/PMBus). This allows any combination of serial interfaces up to the 6-module limit. The 12-channel DMA controller offloads data transfer between peripherals and memory without CPU intervention. (3) The 12-bit ADC features a programmable gain amplifier (1/2x to 16x) for direct sensor interface without external op-amps, automatic offset and gain error compensation, and hardware oversampling/decimation for 13-16 bit effective resolution. The 10-bit DAC provides analog output capability. The PTC (Peripheral Touch Controller) supports 256 capacitive touch channels with proximity detection, enabling sophisticated touch user interfaces without external touch ICs.

Pin Description: ATSAMD21J18A-AUT Pin Definition and Functions
Pin Group Count Function
PORTA 16 ADC, USB, SERCOM, TCC, PTC
PORTB 16 ADC, SERCOM, TC, TCC, PTC
PORTA/B Ext 20 Additional GPIO and peripheral mux
Power 12 VDD, VDDIO, VDDANA, GND, VDDIN
Application Scenarios: In which products and applications is ATSAMD21J18A-AUT used
  • IoT sensor nodes with USB connectivity and capacitive touch UI
  • Home automation and smart devices with 6 SERCOM modules
  • Capacitive touch user interfaces with 256-channel PTC
  • Portable medical instruments with 12-bit ADC PGA and USB
  • Industrial metering and data logging with DMA and SleepWalking
Alternative Models: What chips are recommended as replacements for ATSAMD21J18A-AUT
Model Manufacturer Key Difference
ATSAMD21G18A-AUT Microchip 48-pin, 6 fewer SERCOM pins
ATSAMD20J18A-AUT Microchip No USB, same pin-compatible
SAMD51J19A-AUT Microchip Cortex-M4, 120MHz, same pinout
STM32G071RBT6 ST Cortex-M0+, 64MHz, LQFP-64
LPC55S69JBD100 NXP Dual M33, 100MHz, LQFP-100

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1