Opens in a new tab

AX5302SA

Boost DC-DC, 0.8-5.5V, 1.5A Switch, 500kHz, SOT-23-6

5634

Effective Inventory

Image for reference only

Manufacturer Part:

AX5302SA

Package:

SOT-23-6 (2.9 x 1.6 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AX5302SA from Axelite is a step-up DC-DC converter with 1.5 A switch current, 0.8 V to 5.5 V input, and 500 kHz fixed switching frequency in an SOT-23-6 package for boost and SEPIC applications.

Key Specifications

Type Step-Up DC-DC Converter
Input Voltage 0.8 V to 5.5 V
Switch Current Limit 1.5 A
Switching Frequency 500 kHz
Reference Voltage 0.6 V (2%)
Switch RDS(on) 150 mOhm (typical)
Package SOT-23-6
Operating Temperature -40C to 85C

Features

  • Low 0.8 V minimum input voltage
  • 1.5 A internal switch current limit
  • 500 kHz fixed frequency operation
  • Internal compensation and soft start
  • PWM/PFM mode for high light-load efficiency
  • SOT-23-6 compact package

Applications

  • Single-cell to 3.3V/5V boost conversion
  • OLED display bias supply
  • White LED backlight driver
  • USB power bank boost stage
  • Battery-powered portable equipment
Product Introduction: AX5302SA Product Introduction

The AX5302SA from Axelite is a step-up DC-DC converter with a 1.5 A internal N-channel MOSFET switch, operating from an input voltage as low as 0.8 V. The 500 kHz fixed switching frequency and internal compensation minimize external component count. The 0.6 V feedback reference voltage allows setting output voltages using a simple resistor divider. The device supports PWM/PFM mode switching for high efficiency across the entire load range. The SOT-23-6 package provides a compact solution for space-constrained portable and battery-powered applications including single-cell alkaline/NiMH to 3.3V or 5V boost conversion.

Working Principle: AX5302SA Working Principle

The AX5302SA uses a current-mode control boost converter topology. The internal N-channel MOSFET switch connects the inductor to ground during the on-time, causing inductor current to ramp up linearly. When the peak current reaches the level set by the error amplifier (or the 1.5 A current limit), the switch turns off and the inductor current flows through the external Schottky diode to the output capacitor and load. The error amplifier compares the feedback voltage (from the external resistor divider) with the 0.6 V internal reference and adjusts the peak current threshold to regulate the output voltage. At light loads, the device enters PFM mode where switching pulses are spaced apart to reduce switching losses. The internal soft start limits inrush current during startup. The low 0.8 V minimum input voltage allows operation from a single discharged alkaline cell.

Pin Description: AX5302SA Pin Definition and Functions
Pin Name Type Function
1 SW Output Switch output (connect to inductor)
2 GND Ground Ground
3 FB Input Feedback voltage (0.6V reference)
4 EN Input Enable (high=on, low=shutdown)
5 VIN Power Input supply (0.8-5.5V)
6 SW Output Switch output (connect to inductor)
Application Scenarios: In which products and applications is AX5302SA used
  • Single AA/AAA alkaline cell boost to 3.3V or 5V
  • OLED display positive bias voltage generation
  • White LED string backlight driver for small displays
  • USB power bank single-cell Li-ion boost to 5V
  • Portable instrument battery voltage step-up regulation
Alternative Models: What chips are recommended as replacements for AX5302SA
Manufacturer Part Number Package Notes
Texas Instruments TPS61021ADSGR WSON-6 1A boost, 0.7-5.5V input
Monolithic Power MP3414GG-Z TSOT23-6 1.5A boost, 2.5-5.5V
Richtek RT9271BGQW WQFN-10 2A boost, 2.5-5.5V
Diodes Inc AP3012KTR-G1 SOT-23-6 Boost, 1.5A, 500kHz
Silergy SY7065ABC SOT-23-6 2A boost, 2.5-5.5V

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1