Opens in a new tab

AZ1117IH-3.3TRG1

1A LDO, 3.3V fixed, 1.3V dropout, SOT-223

14994

Effective Inventory

Image for reference only

Manufacturer Part:

AZ1117IH-3.3TRG1

Package:

SOT-223 (6.50 x 3.50 x 1.60 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

AZ1117IH-3.3TRG1 Overview

The AZ1117IH-3.3TRG1 is a 1A fixed 3.3V LDO linear regulator from Diodes Incorporated with maximum input voltage of 15V, 1.1V dropout at 1A, in a SOT-89 package, suitable for embedded system 3.3V power supply.

Key Features

  • Fixed output voltage: 3.3V
  • Maximum output current: 1A
  • Maximum input voltage: 15V
  • Dropout voltage: 1.1V at 1A
  • Line regulation: 0.2%
  • Load regulation: 0.4%
Product Introduction: AZ1117IH-3.3TRG1 Product Introduction

The AZ1117IH-3.3TRG1 is a 1 A low-dropout linear regulator from Diodes Incorporated with a fixed 3.3 V output in an SOT-223 surface-mount package. It features a low dropout voltage of 1.1 V typical at 1 A load, input voltage range from 4.7 V to 15 V, and output voltage accuracy of plus or minus 1 percent at 25 C. The device includes over-current protection, 165 C thermal shutdown with automatic recovery, and safe operating area protection for the output transistor. With 70 dB PSRR at 120 Hz and only 6 mA quiescent current, it is pin-compatible with AMS1117 and LM1117-3.3 for direct drop-in replacement.

Working Principle: AZ1117IH-3.3TRG1 Working Principle

The AZ1117IH-3.3TRG1 uses a PNP pass transistor in a low-dropout configuration where the pass element operates in saturation rather than the linear region, reducing the minimum input-output differential (dropout voltage) to approximately 1.1 V at full 1 A load. An error amplifier compares a fraction of the output voltage (sensed through an internal resistor divider) with an internal bandgap reference voltage of approximately 1.25 V. Any deviation drives the PNP base current to restore regulation. The internal current limit circuit monitors the pass transistor current and reduces the base drive when the output current exceeds approximately 1.35 A, preventing damage during overload or short-circuit conditions. The thermal shutdown circuit monitors the die temperature and disables the pass transistor when junction temperature exceeds 165 C, automatically re-enabling the output once the temperature drops by 25 C of hysteresis. A 10 uF tantalum or 22 uF ceramic output capacitor is required for stability and to prevent oscillation.

Pin Description: AZ1117IH-3.3TRG1 Pin Definition and Functions
Pin Name Description
1 GND/ADJ Ground (fixed output version); connects to PCB ground plane
2 VOUT Regulated 3.3 V output; connect output capacitor (10 uF min) to GND
3 VIN Input supply (4.7 V to 15 V); connect input capacitor (10 uF) to GND
4 Tab/VOUT Heat sink tab; electrically connected to VOUT, solder to copper pour for thermal management

Package: SOT-223-3 (TO-261-4). Dimensions: 6.5 x 3.5 x 1.6 mm. The tab is internally bonded to VOUT and serves as the primary thermal dissipation path.

Application Scenarios: In which products and applications is AZ1117IH-3.3TRG1 used
  • 3.3 V MCU Power: Regulating 5 V system rail to 3.3 V for microcontrollers, sensors, and wireless modules
  • Post-Regulation: Clean 3.3 V rail after a switching preregulator for noise-sensitive analog circuits
  • Embedded Systems: Point-of-load regulation in FPGA and CPLD boards requiring 3.3 V I/O supply
  • Battery-Powered Devices: 9 V or 12 V battery to 3.3 V conversion for portable instrumentation
  • Drop-In Replacement: Pin-compatible upgrade for AMS1117-3.3 in existing PCB designs
Alternative Models: What chips are recommended as replacements for AZ1117IH-3.3TRG1
Model Manufacturer Vout Iout VDO Package Notes
AMS1117-3.3 Advanced Monolithic 3.3 V 1 A 1.1 V SOT-223 Direct pin-compatible
LM1117MP-3.3 Texas Instruments 3.3 V 800 mA 1.1 V SOT-223 Lower current variant
LD1117DT33CTR STMicroelectronics 3.3 V 800 mA 1 V DPAK DPAK package alternative
NCP1117DT33T5G onsemi 3.3 V 1 A 1.1 V DPAK Higher current, DPAK
TLV1117LV33DCYR Texas Instruments 3.3 V 1 A 0.8 V SOT-223 Lower dropout version

AZ1117IH-3.3TRG1 is a 1A LDO from Diodes Inc in SOT-223. The AMS1117-3.3 is the most popular budget alternative with identical pinout and 1A rating. The LD1117S33CTR from ST provides 800mA in the same SOT-223 package. The LM1117MP-3.3 from TI offers 800mA with lower 0.8V dropout. For higher current, the AZ1117EH-3.3TRG1 extends to 1.35A. The TLV1117LV33 from TI provides 1A with only 230mV dropout using ceramic capacitors. The AP1117E33G-13 from Diodes Inc offers 1A with reverse bias protection.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1