Opens in a new tab

B59219J0130A020

EPCOS/TDK PTC inrush current limiter, 100 Ohm, 560VAC, AEC-Q200, radial leaded

7856

Effective Inventory

Image for reference only

Manufacturer Part:

B59219J0130A020

Package:

PBT housing, radial leaded, 22.2 x 18.0 x 14.0 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The B59219J0130A020 is a PTC thermistor inrush current limiter (ICL) from EPCOS/TDK’s B59219J series. With 100 Ohm resistance at 25C and a maximum working voltage of 560VAC, this PTC limiter provides self-resetting inrush current protection for industrial power supplies, frequency converters, and on-board chargers. AEC-Q200 qualified for automotive applications.

Key Specifications

Series B59219J
Type PTC Inrush Current Limiter
Resistance (25C) 100 Ohm +/-25%
Maximum Working Voltage (AC) 560 VAC
Maximum DC Link Voltage 800 VDC
Thermal Capacity 2.3 J/K (typical)
Operating Temperature -40C to +125C
Package PBT plastic housing, radial leaded
Dimensions 22.2 x 18.0 x 14.0 mm
Certification AEC-Q200
Approvals UL (E69802), VDE (40040539)

Features

  • Self-resetting inrush current limiting for power-on surge protection
  • High working voltage up to 560VAC for mains applications
  • DC link voltage capability up to 800VDC
  • AEC-Q200 qualified for automotive reliability
  • Compact PBT plastic housing for mechanical protection
  • UL and VDE safety approvals

Applications

  • Industrial frequency converter inrush limiting
  • On-board EV charger inrush protection
  • Power supply inrush current suppression
  • Industrial drive soft-start circuits
  • Solar inverter input protection
Product Introduction: B59219J0130A020 Product Introduction

The EPCOS/TDK B59219J0130A020 is a PTC inrush current limiter from the B59219J series, providing self-resetting inrush current protection for high-voltage industrial and automotive applications. With 100 Ohm cold resistance and a maximum working voltage of 560VAC / 800VDC, this device limits startup surge currents in frequency converters, on-board chargers, and industrial power supplies. AEC-Q200 certification ensures automotive-grade reliability, while the PBT plastic housing provides mechanical protection and electrical insulation.

Working Principle: B59219J0130A020 Working Principle

The B59219J0130A020 PTC inrush current limiter uses a polycrystalline ceramic material with a high positive temperature coefficient. At power-on, the device is at ambient temperature with 100 Ohm resistance, limiting the peak inrush current drawn by downstream capacitors and rectifiers. As current flows through the device, Joule heating raises its temperature, causing the resistance to decrease to a fraction of its cold value and minimizing steady-state power loss. If an overcurrent condition occurs, the device temperature rises above the Curie point, causing a dramatic resistance increase that limits the fault current. When the fault is cleared, the device cools and returns to its low-resistance state.

Pin Description: B59219J0130A020 Pin Definition and Functions
Pin Name Type Function
1 Lead 1 Input Connect to AC line or DC supply rail
2 Lead 2 Output Connect to load side (rectifier or capacitor bank)
Application Scenarios: In which products and applications is B59219J0130A020 used
  • Industrial frequency converter 400VAC input inrush limiting
  • EV on-board charger DC-link capacitor pre-charge
  • Solar inverter AC input inrush protection
  • UPS rectifier inrush current suppression
  • Industrial power supply soft-start circuit
Alternative Models: What chips are recommended as replacements for B59219J0130A020
Manufacturer Part Number Package Notes
EPCOS/TDK B59219J0130A030 PBT housing Higher resistance variant
Ametherm SL22-10007 Disk NTC ICL comparable function
Cantherm MS35-10005-B Disk 100 Ohm inrush limiter
EPCOS/TDK B59219J0080A020 PBT housing 80 Ohm variant

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1