Opens in a new tab

BAS416

Low-Leakage Switching Diode, 75V, 3pA IR, 0.8us trr, SOD-323

45678

Effective Inventory

Image for reference only

Manufacturer Part:

BAS416

Package:

SOD-323 (1.7 x 1.25 x 0.95 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BAS416 from Nexperia is a low-leakage switching diode with 3 pA typical reverse current, 75 V reverse voltage, and 0.8 us typical reverse recovery time in an SOD-323 surface mount package.

Key Specifications

Type Low-Leakage Switching Diode
Reverse Voltage (VR) 75 V (continuous)
Peak Reverse Voltage (VRRM) 85 V
Forward Current (IF) 200 mA (continuous)
Forward Voltage (VF) 1.0 V (max) @ IF=10mA
Reverse Current (IR) 3 pA (typ) @ VR=75V, 25C
Reverse Recovery Time (trr) 0.8 us (typical)
Junction Capacitance (Cd) 2 pF @ VR=0V, 1MHz
Package SOD-323 (1.7 x 1.25 x 0.95 mm)
Operating Temperature -65C to +150C (TJ)
Marking Code D4

Features

  • Ultra-low 3 pA typical leakage current
  • 75 V continuous reverse voltage rating
  • 0.8 us typical reverse recovery time
  • Low 2 pF junction capacitance
  • Compact SOD-323 package
  • Epitaxial planar construction

Applications

  • Low-leakage signal clamping
  • High-impedance input protection
  • Sensitive measurement circuit switching
  • Photodiode amplifier leakage prevention
Product Introduction: BAS416 Product Introduction

The BAS416 from Nexperia is an epitaxial low-leakage switching diode in a compact SOD-323 surface mount package. The device features an exceptionally low 3 pA typical reverse leakage current at 75 V, making it ideal for high-impedance and precision measurement applications where diode leakage would degrade accuracy. The 0.8 us typical reverse recovery time supports medium-speed switching applications. The 2 pF junction capacitance minimizes signal loading. The SOD-323 package provides a significantly smaller footprint than SOD-80/MiniMELF while maintaining reliable solder joints. The 75 V continuous reverse voltage rating covers most low-voltage signal applications.

Working Principle: BAS416 Working Principle

The BAS416 uses an epitaxial planar construction where the diode is formed on a high-resistivity epitaxial silicon layer grown on a low-resistivity substrate. The high-resistivity epitaxial layer and carefully controlled junction geometry produce the ultra-low 3 pA leakage current. In forward bias, the diode conducts with a forward voltage of approximately 0.7-1.0 V depending on current. In reverse bias below the breakdown voltage, only the extremely small saturation current (3 pA typical at 25C) flows, making the diode effectively an open circuit for high-impedance applications. During switching from forward to reverse bias, stored minority carriers must be swept out before the diode blocks, resulting in a brief reverse recovery period. The 0.8 us recovery time is typical for this construction, achieved through gold doping or similar lifetime-killing techniques that reduce carrier recombination time.

Pin Description: BAS416 Pin Definition and Functions
Pin Name Type Function
1 Cathode Terminal Cathode (indicated by marking band)
2 Anode Terminal Anode
Application Scenarios: In which products and applications is BAS416 used
  • Op amp input protection with sub-nA leakage budget
  • Photodiode amplifier clamp with minimal dark current contribution
  • Sensitive ADC input ESD clamp diode
  • Precision integrator reset switch with low leakage
Alternative Models: What chips are recommended as replacements for BAS416
Manufacturer Part Number Package Notes
Nexperia BAS45A,215 SOD-323 225V, similar low leakage
Nexperia BAS416,215 SOD-323 Same device, tape and reel
Vishay LL4148-GS08 MiniMELF 100V switching diode, higher leakage
onsemi MMSD4148T1G SOD-323 100V, general switching, higher IR
Nexperia BAS19,215 SOD-323 120V, low leakage alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1