Opens in a new tab

BAT54S

Schottky diode array, 30V 200mA, common cathode, SOT-23

5003

Effective Inventory

Image for reference only

Manufacturer Part:

BAT54S

Package:

SOT-23 (2.9×1.3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BAT54S from NXP is a dual series Schottky diode array with 30V 200mA rating and common cathode in SOT-23 for OR-ing and steering applications.

Key Specifications

Package SOT-23 (2.9×1.3mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: BAT54S Product Introduction

The BAT54S from NXP is a dual series Schottky diode array with 30V 200mA rating and common cathode in SOT-23 for OR-ing and steering applications.

Working Principle: BAT54S Working Principle

The BAT54S is a dual Schottky diode array in SOT-23-3 configured as common cathode from NXP. Each diode has a 30V reverse voltage rating, 200mA forward current, and 0.32V typical forward voltage at 1mA (compared to 0.7V for silicon PN junction diodes). The Schottky junction is formed by a metal-semiconductor (barrier) contact rather than a PN junction: majority carriers conduct immediately without the minority carrier storage that causes reverse recovery in PN diodes. This makes BAT54S essentially free of reverse recovery charge (approximately 5nC), ideal for high-speed switching and RF applications. The common-cathode configuration is commonly used for logic OR-ing (two supplies feeding one rail), signal clamping (both anodes connected to a signal line, cathode to VCC and GND for ESD protection), or as a full-wave rectifier pair. The low forward voltage minimizes power dissipation in OR-ing and rectification applications.

Pin Description: BAT54S Pin Definition and Functions
Pin Name Type Function
1 A1 Anode Diode 1 anode
2 A2 Anode Diode 2 anode
3 K1/K2 Cathode Common cathode (diodes 1 and 2)
Application Scenarios: In which products and applications is BAT54S used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for BAT54S
    Manufacturer Part Number Package Notes
    Nexperia BAT54S SOT-23 Direct equivalent
    onsemi BAT54S SOT-23 Pin-compatible equivalent
    Infineon BAT54S E6327 SOT-23 Direct equivalent, Infineon label
    Nexperia BAT54C SOT-23 Common cathode variant (different pinout)
    Nexperia BAT54A SOT-23 Common anode variant

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1