Opens in a new tab

BCM43602A3KMLG

Wi-Fi 5/6 SoC, 2×2 MIMO 802.11ac/ax, dual-band 2.4/5GHz, integrated PA+LNA, PCIe/SDIO host

9250

Effective Inventory

Image for reference only

Manufacturer Part:

BCM43602A3KMLG

Package:

WLCSP-84

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

BCM43602A3KMLG is a Broadcom BCM43602 2×2 802.11ac/ax Wi-Fi SoC with integrated power amplifier, for consumer and enterprise Wi-Fi.

Key Specifications

Type Wi-Fi SoC
Standard 802.11ac/ax (Wi-Fi 5/6)
MIMO 2×2
Frequency 2.4 GHz + 5 GHz
Features Integrated PA, LNA, power management
Series BCM43602

Features

  • 2×2 802.11ac/ax Wi-Fi SoC
  • Dual-band 2.4GHz + 5GHz
  • Integrated PA and LNA
  • For consumer and enterprise AP

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: BCM43602A3KMLG Product Introduction

BCM43602A3KMLG is a Broadcom BCM43602 2×2 802.11ac/ax Wi-Fi SoC with integrated power amplifier, for consumer and enterprise Wi-Fi.

Working Principle: BCM43602A3KMLG Working Principle

The BCM43602A3KMLG is a Broadcom BCM43602 Wi-Fi system-on-chip. It integrates a MAC layer, baseband processor, and 2×2 MIMO radio transceiver on a single die. The MAC handles 802.11ac/ax frame formatting, encryption (WPA3/HW-accelerated), and power management. The baseband implements OFDMA, MU-MIMO, and 1024-QAM modulation/demodulation. Integrated power amplifiers (PA) and low-noise amplifiers (LNA) reduce external RF component count. The chip interfaces with the host via PCIe or SDIO.

Pin Description: BCM43602A3KMLG Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is BCM43602A3KMLG used
  • Consumer Wi-Fi access points
  • Enterprise Wi-Fi infrastructure
  • Smart home gateway
  • IoT wireless connectivity
Alternative Models: What chips are recommended as replacements for BCM43602A3KMLG
Model Manufacturer Key Difference
IPQ4019 Qualcomm Dual-core A7 Wi-Fi SoC, 802.11ac
MT7621 MediaTek Dual-core MIPS router SoC

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1