Opens in a new tab

Home » Integrated Circuits ICs » BL24C16APARC

BL24C16APARC

BL24C16APARC – Serial EEPROM

12457

Effective Inventory

Image for reference only

Manufacturer Part:

BL24C16APARC

Package:

SOP-8 (150mil)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BL24C16APARC from Belling is a 16Kbit I2C serial EEPROM with high-speed 1MHz I2C support. 1.7V-5.5V supply. 1M cycle endurance. 100-year data retention. 3ms write time. SOP-8 150mil package. Compatible with industry-standard 24C16.

Key Specifications

Type 16 Kbit Serial EEPROM
Density 16 Kbit (2K x 8)
Interface I2C (up to 1 MHz)
Page Size 16 bytes
Write Time 3 ms max
Endurance 1M erase/write cycles
Data Retention 100 years
Supply Voltage 1.7V to 5.5V
Operating Temp -40 to +85C
Package SOP-8 (150mil)

Working Principle

The BL24C16A implements the standard 24C16 I2C EEPROM protocol with enhanced 1MHz Fast-mode Plus (Fm+) I2C speed for faster data transfers. The 2Kx8 array supports byte write and 16-byte page write. Sequential read allows continuous reading from any starting address. The device address is 1010xxx with three address bits allowing up to 8 devices on the same I2C bus. Write protect (WP) pin prevents writes to the upper memory block. The 1.7V minimum supply supports 1.8V logic rails.

Applications

  • Consumer electronics
  • Parameter storage
  • Configuration data
  • I2C memory
Product Introduction: BL24C16APARC Product Introduction

The BL24C16APARC from Belling is a 16Kbit I2C serial EEPROM with high-speed 1MHz I2C support. 1.7V-5.5V supply. 1M cycle endurance. 100-year data retention. 3ms write time. SOP-8 150mil package. Compatible with industry-standard 24C16.

Working Principle: BL24C16APARC Working Principle

The BL24C16A implements the standard 24C16 I2C EEPROM protocol with enhanced 1MHz Fast-mode Plus (Fm+) I2C speed for faster data transfers. The 2Kx8 array supports byte write and 16-byte page write. Sequential read allows continuous reading from any starting address. The device address is 1010xxx with three address bits allowing up to 8 devices on the same I2C bus. Write protect (WP) pin prevents writes to the upper memory block. The 1.7V minimum supply supports 1.8V logic rails.

Pin Description: BL24C16APARC Pin Definition and Functions
Pin Name Desc
1-3 A0-A2 Address inputs
4 GND Ground
5 SDA I2C data
6 SCL I2C clock
7 WP Write protect
8 VCC Supply
Application Scenarios: In which products and applications is BL24C16APARC used
  • Consumer electronics
  • Parameter storage
  • Configuration data
  • I2C memory
Alternative Models: What chips are recommended as replacements for BL24C16APARC
Model Vendor Diff
AT24C16A Microchip Industry standard

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1