Opens in a new tab

BLM15AX601SN1D

600R @ 100MHz ferrite bead, 0402, 500mA, 340mR DCR

6144

Effective Inventory

Image for reference only

Manufacturer Part:

BLM15AX601SN1D

Package:

0402 (1005 Metric)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BLM15AX601SN1D from Murata Electronics is a 600 Ohm @ 100MHz SMD ferrite bead in a 0402 (1005 Metric) package. EMI suppression ferrite bead.

Key Specifications

Component Type SMD Ferrite Bead / EMI Suppression Filter
Impedance 600 Ohm @ 100MHz
Tolerance –
Dielectric/Type NiZn Ferrite
Package 0402 (1005 Metric)

Features

  • 600 Ohm impedance at 100MHz for effective EMI suppression
  • Ultra-compact 0402 footprint (1.0×0.5mm)
  • 500mA rated current for signal line applications
  • Low 340mOhm DC resistance for minimal voltage drop
  • No lead grounding required – operates as absorber

Applications

  • High-speed digital signal line EMI filtering
  • USB D+/D- line noise suppression
  • HDMI and DisplayPort signal line filtering
  • Clock line EMI reduction
  • General-purpose signal line noise filtering
Product Introduction: BLM15AX601SN1D Product Introduction

The BLM15AX601SN1D from Murata Electronics is a 600 Ohm @ 100MHz SMD ferrite bead in a 0402 (1005 Metric) package. EMI suppression ferrite bead.

Working Principle: BLM15AX601SN1D Working Principle

The BLM15AX601SN1D uses a multilayer ferrite construction with NiZn (Nickel-Zinc) ceramic material. At low frequencies and DC, the device presents low resistance (primarily the DC resistance of the internal conductor), allowing signal and power currents to flow with minimal voltage drop. At high frequencies (above approximately 10MHz), the ferrite material exhibits high impedance due to the frequency-dependent increase in both inductive reactance and resistive losses. This high-frequency impedance converts EMI noise energy into heat, effectively suppressing conducted emissions on power and signal lines without requiring a ground connection for the filtering function.

Pin Description: BLM15AX601SN1D Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Passive Signal/power input; connect in series with filtered line
2 Terminal 2 Passive Signal/power output
Application Scenarios: In which products and applications is BLM15AX601SN1D used
  • High-speed digital signal line EMI filtering
  • USB D+/D- line noise suppression
  • HDMI and DisplayPort signal line filtering
  • Clock line EMI reduction
  • General-purpose signal line noise filtering
Alternative Models: What chips are recommended as replacements for BLM15AX601SN1D
Manufacturer Part Number Package Notes
GZ1005D601TF TDK 0402 600R ferrite
BLM15AG601SN1D Murata 0402 600R general
MPZ1005S601AT000 TDK 0402 600R ferrite
742792514 Wurth 1812 600R high-current

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1