Opens in a new tab

BLUENRG-248

BLE 5.0 SoC, Cortex-M0+, 256kB Flash, +8dBm, -96dBm, QFN-32 5x5mm

11118

Effective Inventory

Image for reference only

Manufacturer Part:

BLUENRG-248

Package:

QFN-32 (5 x 5 x 0.85 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BLUENRG-248 from STMicroelectronics is a Bluetooth Low Energy (BLE) 5.0 wireless system-on-chip with 256 kB Flash and 24 kB RAM in a QFN-32 (5×5 mm) package. Based on an ARM Cortex-M0+ core, it provides a complete BLE radio and protocol stack with up to +8 dBm output power and -96 dBm receiver sensitivity for extended range IoT applications.

Key Specifications

Core ARM Cortex-M0+, 32-bit
Flash Memory 256 kB
RAM 24 kB
BLE Version 5.0 qualified
Output Power Up to +8 dBm (programmable)
Receiver Sensitivity -96 dBm (BLE 1 Mbps)
Frequency Range 2.4 GHz ISM band
Link Budget 104 dB (typical)
Supply Voltage 1.7V to 3.6V
Tx Current 10.3 mA @ +8 dBm
Rx Current 7.3 mA
Operating Temperature -40°C to +85°C
Package QFN-32 (5 x 5 x 0.85 mm)

Features

  • Complete BLE 5.0 radio and stack in single chip
  • Up to +8 dBm output power for extended range
  • 256 kB Flash with 24 kB RAM for application and stack
  • ARM Cortex-M0+ core for application processing
  • SPI, I2C, UART, and GPIO peripherals
  • Embedded BLE stack with master and slave support

Applications

  • Beacons and proximity tags
  • Wireless sensor networks
  • Smart home and building automation
  • Wearable health and fitness devices
  • Industrial IoT edge nodes
Product Introduction: BLUENRG-248 Product Introduction

The STMicroelectronics BLUENRG-248 is a Bluetooth Low Energy 5.0-qualified wireless system-on-chip integrating an ARM Cortex-M0+ processor, 256 kB Flash memory, 24 kB RAM, and a complete BLE radio transceiver in a compact QFN-32 package. With programmable output power up to +8 dBm and receiver sensitivity of -96 dBm, it achieves a 104 dB link budget for extended range applications. The 256 kB Flash accommodates both the BLE protocol stack and user application code, while the 24 kB RAM supports simultaneous master and slave connections. The device is designed for low-power operation with 10.3 mA Tx current at +8 dBm and 7.3 mA Rx current, enabling coin-cell and energy-harvesting powered designs.

Working Principle: BLUENRG-248 Working Principle

The BLUENRG-248 integrates a complete BLE radio and protocol stack on a single chip. The ARM Cortex-M0+ core runs at up to 32 MHz, executing both the BLE link layer and the user application from the 256 kB Flash. The BLE radio transceiver operates in the 2.4 GHz ISM band using frequency hopping across 40 channels (3 advertising + 37 data channels). The radio supports BLE data rates of 1 Mbps and 2 Mbps (BLE 5.0 high-speed mode). The embedded BLE stack handles advertising, scanning, connection establishment, and data exchange according to the BLE specification. The link layer manages packet formatting, CRC generation/checking, data whitening, and AES-128 encryption for secure connections. The +8 dBm output power is achieved through an integrated power amplifier with programmable gain, while the -96 dBm sensitivity comes from a low-noise receiver front-end with integrated LNA. Sleep modes reduce current to sub-microamp levels between connection events.

Pin Description: BLUENRG-248 Pin Definition and Functions
Pin Name Description
1 VDD Digital Supply (1.7-3.6V)
2-5 GPIO[3:0] General Purpose I/O / SPI/I2C/UART
6 VDD_RF RF Supply (1.7-3.6V)
7 RF_IN/OUT RF Antenna Connection
8 VDD_RF2 RF Supply (1.7-3.6V)
9-16 GPIO[11:4] General Purpose I/O with alternate functions
17 RESET Reset Input (active low)
18-25 GPIO[19:12] General Purpose I/O with alternate functions
26 SWDIO Serial Wire Debug Data
27 SWCLK Serial Wire Debug Clock
28-31 GPIO[23:20] General Purpose I/O
32 GND Ground
Application Scenarios: In which products and applications is BLUENRG-248 used
  • Beacon / Proximity: +8 dBm output power extending beacon range to 100m+ for asset tracking and indoor positioning applications
  • Wireless Sensor Node: Low-power sleep modes between BLE connection events enabling years of operation from a CR2032 coin cell
  • Smart Home: BLE 5.0 long-range mode (125/500 kbps coded PHY) for smart locks, thermostats, and lighting controllers
  • Wearable Health: 24 kB RAM supporting simultaneous master/slave connections for heart rate monitor with phone and sensor connections
  • Industrial IoT: 256 kB Flash hosting both BLE stack and Modbus-over-BLE application in a single-chip gateway edge node
Alternative Models: What chips are recommended as replacements for BLUENRG-248
Model Brand BLE Flash Pout (dBm)
BLUENRG-235 ST 5.3 256 kB +8
nRF52832-QFAA Nordic 5.0 512 kB +4
CC2640R2FRHBR TI 5.0 128 kB +5
DA14531-00000T2 Dialog 5.1 32 kB +2.3
SKY66112-11 Skyworks 5.0 FEM – +20

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1