Opens in a new tab

BQ25101YFPR

250mA Li-Ion linear charger, 4.2V, 75nA leakage, JEITA, 6-DSBGA 1.6×0.9mm

6012

Effective Inventory

Image for reference only

Manufacturer Part:

BQ25101YFPR

Package:

6-DSBGA / YFP (1.6 x 0.9 x 0.5mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BQ25101YFPR from Texas Instruments is a 250mA single-cell Li-Ion/Li-Polymer linear battery charger in a tiny 6-DSBGA (1.6 x 0.9mm) package. It features 75nA max battery leakage current, 4.2V charge voltage with 1% accuracy, programmable charge current from 10mA to 250mA, JEITA temperature compliance, and 30V input rating with 6.5V OVP.

Key Specifications

Battery Chemistry Li-Ion / Li-Polymer
Charge Voltage 4.2V (1% accuracy)
Fast Charge Current 10mA to 250mA (programmable)
Termination Current Down to 1mA (programmable)
Battery Leakage Current 75nA max (battery only)
Input Voltage Rating 30V max (6.5V OVP)
Operating Input Range 4.45V to 6.5V
Pre-charge Current Programmable (10% to 100% of fast charge)
JEITA Temperature Compliant (NTC thermistor input)
Safety Timer 10-hour fixed
Thermal Regulation 125°C junction (reduces charge current)
Package 6-DSBGA (1.6 x 0.9mm, 0.5mm pitch)
Operating Temperature 0°C to +125°C

Features

  • 1% charge voltage accuracy at 4.2V
  • 10% charge current accuracy
  • Ultra-low 10mA to 250mA programmable fast charge current
  • Minimum 1mA termination current
  • Ultra-low battery leakage: 75nA max
  • Programmable pre-charge and termination thresholds
  • 30V input voltage rating with 6.5V OVP
  • Input voltage dynamic power management (DPM)
  • 125°C thermal regulation; 150°C thermal shutdown
  • JEITA temperature compliance with NTC thermistor
  • OUT short-circuit protection and ISET short detection
  • Charge status indicator output
  • Tiny 1.6 x 0.9mm DSBGA package

Applications

  • Smartwatches and fitness bands
  • True wireless earbuds charging case
  • Bluetooth headsets and wearables
  • Low-power handheld medical devices
  • IoT sensor nodes with Li-Ion battery
Product Introduction: BQ25101YFPR Product Introduction

The BQ25101YFPR from Texas Instruments is a highly integrated single-cell Li-Ion/Li-Polymer linear charger in an ultra-small 1.6 x 0.9mm DSBGA package. It charges at up to 250mA with 1% voltage accuracy at 4.2V, while drawing only 75nA max from the battery when not charging. The device supports three charging phases (pre-charge, constant current, constant voltage) with programmable current levels and minimum 1mA termination. JEITA temperature compliance via an NTC thermistor ensures safe charging across temperature ranges. The 30V input rating with 6.5V OVP supports low-cost unregulated adapters.

Working Principle: BQ25101YFPR Working Principle

The BQ25101 operates as a linear charger with three phases. When a valid input supply is detected (above UVLO and below OVP), the device performs ISET and OUT short checks. If the battery voltage is below the LOWV threshold, pre-charge begins at a programmable fraction of the fast-charge current. Once the battery exceeds LOWV, constant-current fast charging begins at the current programmed by the ISET resistor. When the battery reaches 4.2V, the constant-voltage phase holds the battery at the regulation voltage while current tapers. Charging terminates when the current drops below the termination threshold (half the pre-charge current). The JEITA-compliant NTC input adjusts charge parameters: cold conditions halve the fast-charge current, while hot conditions reduce the regulation voltage to 4.06V. Thermal regulation at 125°C reduces charge current to prevent overheating.

Pin Description: BQ25101YFPR Pin Definition and Functions
Pin Name Type Function
A1 OUT Power Battery connection / charge output
A2 IN Power Input supply (4.45V to 6.5V)
B1 ISET Analog Charge current set resistor / pre-charge-termination
B2 GND Power Ground
C1 NTC Input Battery temperature sense (JEITA)
C2 PG Output Power good / charge status indicator
Application Scenarios: In which products and applications is BQ25101YFPR used
  • Smartwatch and fitness band battery charging from USB
  • True wireless earbud charging case with 75nA battery standby
  • Bluetooth headset wearable charger with JEITA safety
  • Portable medical sensor Li-Ion charging with 1mA termination
  • IoT device coin-cell or small Li-Po battery management
Alternative Models: What chips are recommended as replacements for BQ25101YFPR
Manufacturer Part Number Package Notes
TI BQ25100YFPR DSBGA-6 4.2V without JEITA PG output
TI BQ25101HYFPR DSBGA-6 4.35V high-voltage chemistry
TI BQ25120YFPR DSBGA-9 With LDO and load switch
onsemi MC34671AEF DFN-8 1A charger, 4.2V/4.35V
Microchip MCP73831T-2ACI/OT SOT-23-5 500mA, 4.2V, simpler charger

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1