Opens in a new tab

BQ76200PWR

High-side NFET driver, 100V, charge pump, pre-charge, TSSOP-16

6272

Effective Inventory

Image for reference only

Manufacturer Part:

BQ76200PWR

Package:

TSSOP-16 (5.0 x 4.4 x 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BQ76200PWR from Texas Instruments is a high-side N-channel MOSFET driver for battery pack charge/discharge control in a 16-pin TSSOP package. With integrated charge pump, pre-charge PFET driver, and 100V maximum tolerance, it works with bq769x0 AFE devices to provide complete high-side battery protection for 12V to 48V packs.

Key Specifications

Function High-side NFET driver
Max Voltage (BAT/PACK) 75V recommended, 100V abs max
Charge Pump Voltage ~14V above BAT
CHG/DSG Drivers High-side NMOS FET gate drive
PCHG Driver Pre-charge P-channel MOSFET
Supply Current (Normal) 40 uA typical
Supply Current (Shutdown) <10 uA max
Charge Pump Cap Scalable external capacitor
Pack Monitor Internal switch for PACK+ sensing
Independent Enables CHG_EN, DSG_EN, PCHG_EN, CP_EN
Operating Temperature -40 to +85 C
Package TSSOP-16 (5.0 x 4.4 mm)
Companion AFE bq76920/30/40

Features

  • High-side NMOS charge/discharge FET drivers
  • Integrated charge pump with scalable capacitor
  • Pre-charge PFET driver for depleted batteries
  • Independent digital enable control for CHG/DSG/PCHG/CP
  • 100V high-voltage tolerant pins
  • Internal pack voltage divider switch
  • Common or separate charge/discharge path support
  • 40uA normal mode current, <10uA shutdown
  • Fast FET turn-on and turn-off times

Applications

  • E-bike and e-scooter battery packs
  • UPS and energy storage systems
  • Base station battery backup
  • 12V to 48V battery packs
Product Introduction: BQ76200PWR Product Introduction

The BQ76200PWR from Texas Instruments is a high-side N-channel MOSFET driver for battery pack charge/discharge control in a 16-pin TSSOP package. The PW denotes TSSOP-16, R denotes tape and reel. The device drives back-to-back NMOS FETs for charge and discharge switching on the high-side (positive terminal) of battery packs, avoiding ground disconnection and maintaining communication between pack and host. An integrated charge pump generates approximately 14V above the BAT voltage to drive the NMOS gates, with an external scalable capacitor to support multiple parallel FETs. The PCHG driver controls a P-channel MOSFET for current-limited pre-charge of deeply depleted packs or pre-discharge for inrush current limiting. Independent digital enable pins (CHG_EN, DSG_EN, PCHG_EN, CP_EN) allow flexible control by the companion bq769x0 AFE or host MCU. The 100V maximum voltage tolerance supports 12V to 48V battery packs. An internal switch connects PACK+ voltage to an external resistor divider for charger detection.

Working Principle: BQ76200PWR Working Principle

The BQ76200 operates through three subsystems: (1) Charge Pump: An internal charge pump generates approximately 14V above the BAT pin voltage to drive the gate of NMOS FETs above their source voltage (which sits at BAT potential). The charge pump requires an external capacitor between VDDCP and BAT pins. The capacitor value scales with the number of parallel FETs (larger gate charge requires larger capacitor). The CP_EN pin enables the charge pump, and it can also be auto-enabled by CHG_EN or DSG_EN. (2) FET Drivers: CHG output drives the charge NMOS gate to BAT+VDDCP when CHG_EN is high. DSG output drives the discharge NMOS gate similarly. When disabled, both outputs pull to BAT (FETs off). The PCHG output drives a P-channel MOSFET gate to provide a low-current pre-charge path independent of the main NMOS FETs. (3) Pack Monitor: An internal analog switch controlled by PMON connects the PACK+ voltage to the PACKDIV pin, where an external resistor divider scales the voltage for ADC measurement by the host or AFE. The switch has finite on-resistance, so PMON should only be enabled during measurement to minimize power consumption.

Pin Description: BQ76200PWR Pin Definition and Functions
Pin Name Type Description
1 VDDCP Analog Charge pump capacitor (to BAT)
2 BAT Power Battery positive connection
3 NC — No connect
4 CHG_EN Input Charge FET enable (active high)
5 CP_EN Input Charge pump enable (active high)
6 DSG_EN Input Discharge FET enable (active high)
7 PMON Input Pack voltage monitor enable
8 PFET_EN Input Pre-charge FET enable (active high)
9 VSS Power Ground
10 PACKDIV Output Pack voltage divider output
11 PACK Input Pack positive voltage input
12 DSG Output Discharge NMOS gate drive
13 NC — No connect
14 CHG Output Charge NMOS gate drive
15 PFET Output Pre-charge PMOS gate drive
16 NC — No connect
Application Scenarios: In which products and applications is BQ76200PWR used
  • 48V eBike battery with bq76940 AFE, high-side NMOS protection, and pre-charge for depleted cells
  • UPS battery with separate charge/discharge paths using independent CHG/DSG enable control
  • 12V Li-Ion pack with scalable charge pump capacitor supporting 3 parallel NMOS FETs
  • Energy storage system with PACK+ voltage monitoring via internal switch and resistor divider
Alternative Models: What chips are recommended as replacements for BQ76200PWR
Model Manufacturer Voltage Notes
TPB76200 3PEAK 48V Pin-compatible alternative
BQ76200M TI 75V Alternative package option
A8452 Allegro 85V Integrated high-side driver

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1