Opens in a new tab

Home » Integrated Circuits ICs, Sensors » BQ76PL455ATPFCTQ1

BQ76PL455ATPFCTQ1

16-cell battery monitor, AEC-Q100, UART, TQFP-80

12822

Effective Inventory

Image for reference only

Manufacturer Part:

BQ76PL455ATPFCTQ1

Package:

TQFP-80 (12x12mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BQ76PL455ATPFCTQ1 from TI is an AEC-Q100 automotive 16-cell battery monitor with passive balancing, UART interface, and OV/UV protection in TQFP-80 for EV/HEV battery packs.

Key Specifications

Package TQFP-80 (12x12mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: BQ76PL455ATPFCTQ1 Product Introduction

The BQ76PL455ATPFCTQ1 from TI is an AEC-Q100 automotive 16-cell battery monitor with passive balancing, UART interface, and OV/UV protection in TQFP-80 for EV/HEV battery packs.

Working Principle: BQ76PL455ATPFCTQ1 Working Principle

The BQ76PL455ATPFCTQ1 is a 16-cell lithium battery pack monitor from Texas Instruments in TQFP-80, AEC-Q100 qualified for automotive applications. It monitors up to 16 series-connected battery cells with 14-bit ADC resolution, achieving +/-2mV cell voltage measurement accuracy across the full temperature range (-40C to +105C). The device uses a switched-capacitor ADC architecture: an internal multiplexer sequentially connects each cell input to the ADC through a capacitor, measuring the differential voltage between adjacent cell taps. Each cell measurement takes 200us, and all 16 cells are measured in 3.2ms. The device also supports passive cell balancing: each cell input has an internal FET that can discharge the cell through an external resistor (typically 100-200 ohms), allowing equalization of cell voltages. The UART communication interface supports daisy-chain topology: up to 32 BQ76PL455 devices can be connected in series (monitoring up to 512 cells) using a single host UART port, with each device acting as a repeater for downstream devices. The isolation barrier between the communication high side and low side provides 2500Vrms galvanic isolation between battery modules. The device includes comprehensive diagnostics: wire-break detection (open-wire), multiplexer self-check, ADC self-test, register parity, and communication CRC. The GPIO pins can measure external NTC thermistors for temperature monitoring. The internal regulators provide 5V and 3.3V for external circuitry, reducing BOM. The -TPFCTQ1 suffix specifies TQFP-80, AEC-Q100 grade 1, automotive.

Pin Description: BQ76PL455ATPFCTQ1 Pin Definition and Functions
Pin Name Type Function
1-6 CELL0-CELL5 Analog Cell voltage inputs 0-5 (differential, connect to battery cell terminals)
7-12 CELL6-CELL11 Analog Cell voltage inputs 6-11
13-16 CELL12-CELL15 Analog Cell voltage inputs 12-15
17-20 VSENSE/GPIO0-GPIO3 Analog/I/O Current sense / general-purpose I/O for temperature sensors
21-24 COMMH/COMML I/O Isolated UART communication (high and low sides)
25-32 VDD/VSS/REG50/REGOUT/DIAG Power 5V and 3.3V regulators, diagnostics
Application Scenarios: In which products and applications is BQ76PL455ATPFCTQ1 used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for BQ76PL455ATPFCTQ1
    Manufacturer Part Number Package Notes
    Texas Instruments BQ76PL455ATPFCTQ1 TQFP-80 Same device, AEC-Q100
    Texas Instruments BQ76952RHFR TQFP-48 10-16 cell monitor, I2C/SPI, newer
    Analog Devices ADBMS6830BCPZ LQFP-64 18-cell battery monitor, isoSPI
    NXP MC33771CTP1AE LQFP-64 14-cell battery monitor, TPL communication
    Renesas ISL78714FRZ TQFP-64 14-cell battery monitor, daisy-chain SPI

    Recommend Parts

    TMP275AIDR

    0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

    Brand: TI

    Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

    IN STOCK: 3681pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IL485E

    NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

    Brand: nve

    Package: SOIC-16 WB

    IN STOCK: 5280pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRFS4227TRLPBF

    IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

    Brand: infineon

    Package: D2PAK (TO-263)

    IN STOCK: 4334pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    CD4070BM96

    Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

    Brand: TI

    Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

    IN STOCK: 4245pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AB1526

    Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

    Brand: airoha

    Package: BGA

    IN STOCK: 25000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    LP2980IM5-5.0

    50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

    IN STOCK: 2557pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1