Opens in a new tab

BQ78350DBTR-R1

CEDV Li-Ion fuel gauge/BMS controller, 3-15S, 320Ah, SMBus, SHA-1, TSSOP-30

7052

Effective Inventory

Image for reference only

Manufacturer Part:

BQ78350DBTR-R1

Package:

TSSOP-30 (7.8 x 6.4 x 1.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BQ78350DBTR-R1 from Texas Instruments is a CEDV (Compensated End-of-Discharge Voltage) lithium-ion fuel gauge and battery management controller designed to companion the bq769x0 AFE family. In a 30-pin TSSOP package, it supports 3-15 series cells, provides SOC/SOH monitoring, cell balancing, LED/LCD display, and comprehensive protection for battery packs up to 320Ah.

Key Specifications

Cell Chemistry Li-Ion/Li-Polymer, LiFePO4
Series Cells 3 to 15
Battery Capacity 100 mAh to 320,000 mAh
Gauge Algorithm CEDV (Coulomb counting + voltage)
Communication I2C, SMBus 1.1
Cell Balancing Internal and External
Capacity Display 5-segment LED or LCD
Protection COV, CUV, OCD, OCC, OT, UT, SCD
Authentication SHA-1
Supply Voltage 2.4V to 2.6V (typ 2.5V)
Supply Current 0.65 mA typical
Operating Temperature -40 to +85 C
Package TSSOP-30 (7.8 x 6.4 mm)
Companion AFE bq76920/30/40
Status NRND (Not Recommended for New Designs)

Features

  • CEDV fuel gauge with SoH monitoring
  • Supports 3-15 series Li-Ion/LiFePO4 cells
  • SMBus 1.1 host communication
  • Configurable voltage/current/temperature protection
  • Internal and external cell balancing
  • 5-segment LED or LCD capacity display
  • SHA-1 authentication
  • CC-CV charge support with precharge
  • Data logging for lifetime diagnostics
  • Pre-programmed firmware, configurable parameters

Applications

  • Light electric vehicles (eBike, eScooter)
  • Power tools
  • UPS and backup battery systems
  • Telecom base station batteries
Product Introduction: BQ78350DBTR-R1 Product Introduction

The BQ78350DBTR-R1 from Texas Instruments is a CEDV lithium-ion fuel gauge and battery management controller companion to the bq769x0 AFE family in a 30-pin TSSOP package. The R1 suffix denotes the R1 firmware revision (v1.04) with improved shutdown robustness. The DBT denotes 30-pin TSSOP package, R indicates tape and reel. The device provides a complete battery management subsystem: accurate fuel gauging using CEDV (Compensated End-of-Discharge Voltage) algorithm, state-of-health (SoH) monitoring, internal/external cell balancing, and a full range of programmable voltage, current, and temperature protections. Supporting 3 to 15 series Li-Ion/LiFePO4 cells with battery capacity up to 320Ah, it targets light electric vehicles, power tools, and UPS systems. The SMBus 1.1 interface communicates SOC, SOH, and diagnostic data to the host. A 5-segment LED or LCD display shows charge level directly. SHA-1 authentication prevents unauthorized battery packs. Lifetime data logging records cell voltage, current, and temperature history for warranty and diagnostics.

Working Principle: BQ78350DBTR-R1 Working Principle

The BQ78350-R1 operates through four subsystems: (1) CEDV Fuel Gauge: Uses coulomb counting integrated with Compensated End-of-Discharge Voltage (CEDV) algorithm. The coulomb counter measures accumulated charge/discharge current through the bq769x0 sense resistor. CEDV improves SOC accuracy by compensating for temperature, discharge rate, and aging effects on the end-of-discharge voltage. Chemistry data loaded into flash allows SOC estimation at power-up from rest voltage. (2) Cell Monitoring and Balancing: Individual cell voltages are measured by the companion bq769x0 AFE and reported to the BQ78350 via I2C. The controller enables internal or external cell balancing to equalize cell voltages during charge and rest periods. (3) Protection Engine: Programmable thresholds for cell overvoltage (COV), cell undervoltage (CUV), overcurrent in charge (OCC), overcurrent in discharge (OCD), short-circuit discharge (SCD), overtemperature (OT), and undertemperature (UT). Hardware-based fast comparators in the bq769x0 provide primary protection, while the BQ78350 adds secondary firmware-based protection with configurable delay times. (4) Communication and Display: SMBus 1.1 slave interface reports all measured and calculated data to the host system. Up to 8 SMBus addresses can be selected via an external resistor. A 5-segment LED or LCD display output provides direct visual SOC indication without host intervention.

Pin Description: BQ78350DBTR-R1 Pin Definition and Functions
Pin Group Count Type Description
SMBus 2 I/O SMBC (clock), SMBD (data)
LED/LCD 5 Output 5-segment display driver outputs
AFE Interface 2 I/O I2C to bq769x0 (SDA, SCL)
Control 4 Output CHG, DSG, ZCHG, ZDSG FET control
Alert 1 Output ALERT interrupt to host
Power Multiple Power VCC, VSS, VDD, REGOUT
Application Scenarios: In which products and applications is BQ78350DBTR-R1 used
  • 48V eBike battery with 13S Li-Ion, CEDV gauge, LED display, and CAN-bridge SMBus host
  • Power tool 5S Li-Ion pack with SHA-1 authentication, overcurrent/discharge protection, and LCD SOC
  • UPS 15S LiFePO4 with 320Ah capacity, cell balancing, and lifetime data logging for warranty
  • Telecom base station 48V battery with CC-CV charge control and temperature-based protection
Alternative Models: What chips are recommended as replacements for BQ78350DBTR-R1
Model Manufacturer Cells Algorithm Notes
BQ78350-R1A TI 3-15S CEDV Improved R1A revision
BQ40Z60 TI 2-4S Impedance Track Integrated AFE+charger
BQ34Z100-G1 TI 3-15S Impedance Track Standalone gauge
BQ76952 TI 3-16S AFE only Integrated protector + AFE

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1