Opens in a new tab

BTS50085-1TMB

Smart high-side switch, 9mΩ RON, 44A, 12V automotive, PG-TO220-7

1850

Effective Inventory

Image for reference only

Manufacturer Part:

BTS50085-1TMB

Package:

PG-TO220-7-11 (through-hole, tab connected to Vbb)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BTS50085-1TMB from Infineon Technologies is a PROFET+ smart high-side power switch integrating an N-channel vertical power FET with charge pump, current-controlled input, and diagnostic feedback. With 9 mΩ on-state resistance, 44A nominal load current, and comprehensive protection, it is designed for 12V automotive and industrial applications driving high-current resistive, capacitive, and inductive loads.

Key Specifications

On-State Resistance (RON) 9 mΩ typical @ 25°C
Nominal Load Current (IL(ISO)) 44A @ TC=85°C
Short Circuit Current Limit 90A
Operating Voltage (Vbb) 5.0V to 58V
Overvoltage Protection 70V (Vbb(AZ))
Current Sense Ratio (IL:IIS) 13,000:1
ESD Capability 4.0 kV (HBM)
Operating Temperature -40°C to +150°C (junction)
Package PG-TO220-7-11 (7-pin through-hole)

Features

  • Ultra-low RON: 9 mΩ typical for minimal power dissipation
  • Integrated charge pump for N-channel gate drive
  • Current sense output proportional to load current (13,000:1 ratio)
  • Comprehensive protection: overcurrent, overtemperature, overvoltage
  • Short circuit protection with current limitation
  • Load dump protection up to 80V
  • Diagnostic feedback via IS pin (zero current on fault)
  • Reverse battery and ground disconnect protection

Applications

  • Automotive lighting (halogen, LED, HID ballast)
  • Heated windshield and seat heater control
  • Solenoid and valve driving in automotive systems
  • Industrial 12V/24V high-current load switching
  • PTC heater and blower motor control
Product Introduction: BTS50085-1TMB Product Introduction

The BTS50085-1TMB from Infineon is a PROFET+ smart high-side power switch with 9 mΩ on-resistance, 44A nominal load current, and 90A short-circuit current limit. Integrating an N-channel vertical power FET with charge pump, current sense (13,000:1 ratio), and comprehensive protection (OCP, OTP, OVP, load dump), it is designed for 12V automotive and industrial high-current load driving applications in a PG-TO220-7-11 package.

Working Principle: BTS50085-1TMB Working Principle

The BTS50085-1TMB integrates an N-channel vertical power MOSFET with all necessary control and protection circuitry. The internal charge pump generates a gate voltage above the supply rail to fully enhance the N-channel MOSFET, enabling the low 9 mΩ on-resistance. The current-controlled input pin (IN) activates the switch when pulled to ground. The IS pin provides a diagnostic sense current proportional to the load current at a 13,000:1 ratio, enabling real-time load monitoring. Protection circuits include overcurrent limitation (90A), overtemperature shutdown with auto-restart, overvoltage clamping at 70V, and load dump protection to 80V. The output clamp (VON(CL) = 62V) protects against inductive kickback when switching off inductive loads.

Pin Description: BTS50085-1TMB Pin Definition and Functions
Pin Name Type Function
1,2,6,7 OUT Output Output to load (all four pins must be shorted together)
3 IN Input Input control (active-low, activates switch when pulled to GND)
4 Vbb Power Positive supply (tab electrically connected; use tab for high-current)
5 IS Output Diagnostic current sense output (proportional to IL; zero on fault)
Application Scenarios: In which products and applications is BTS50085-1TMB used
  • Automotive lighting: halogen, LED, and HID ballast high-side switching
  • Heated windshield, seat heater, and PTC heater control
  • Solenoid and valve driving with inductive load protection
  • Industrial 12V/24V high-current load switching with diagnostics
  • Blower motor and cooling fan speed control
Alternative Models: What chips are recommended as replacements for BTS50085-1TMB
Manufacturer Part Number Package Notes
Infineon BTS50080-1TMA TO-220-7 Similar, slightly different current rating
Infineon BTS5012SDA TO-252-5 Surface-mount, lower current alternative
ST VND5T100AJ PowerSSO-12 Similar smart high-side switch from ST
Infineon BTS50085-1TMBXUMA1 TO-220-7 Tape and reel version
Infineon BTS4140N SOT-223 Smaller, lower current (4A) version

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1