Product Overview
The BTS5090-1EJA is a single-channel smart high-side power switch from Infineon Technologies, part of the PROFET™+ 12V family of intelligent power devices. Fabricated in Infineon’s Smart6 technology, this device integrates a 90 mΩ N-channel vertical power MOSFET with comprehensive protection, diagnostic, and control circuitry on a single monolithic chip.
Designed specifically for automotive 12V systems, the BTS5090-1EJA operates from a supply voltage of 5 V to 28 V and can handle nominal load currents up to 3 A. The device provides an accurate proportional current sense output (IS pin) with a typical sense ratio kILIS of 1500, enabling the system controller to monitor the load current for diagnostic and control purposes.
Housed in a PG-DSO-8-43-EP package with an exposed thermal pad, the BTS5090-1EJA offers a rich set of protection features including overcurrent limitation (20 A min), thermal shutdown with dynamic temperature limitation, overvoltage protection, undervoltage shutdown, loss of ground protection, and reverse polarity protection capability with an external resistor. The device is AEC-Q100 qualified and designed to drive lamps up to P21W, LEDs, and other loads in harsh automotive environments.
Key Specifications
| Parameter | Value |
|---|---|
| Number of Channels | 1 (single high-side) |
| RDS(on) @ 25°C | 90 mΩ typical |
| RDS(on) @ 150°C | 180 mΩ maximum |
| Nominal Load Current | 3 A |
| Short-Circuit Current Limit (ILIM) | 20 A minimum |
| Operating Supply Voltage (VS) | 5 V to 28 V |
| Load Dump Voltage (max) | 41 V |
| Logic Input Compatibility | 3.3 V / 5 V CMOS |
| Current Sense Ratio (kILIS) | 1500 typical | Diagnostic Type | Analog proportional sense (IS pin) |
| Open Load Detection | ON-state and OFF-state |
| Turn-ON Time (ton) | 230 µs max |
| Turn-OFF Time (toff) | 230 µs max |
| Standby Current | 0.5 µA typical (OFF state) |
| Operating Junction Temperature | –40°C to +150°C |
| Package | PG-DSO-8-43 EP (exposed pad) |
| Qualification | AEC-Q100, Automotive Grade |
Features
- Single-channel smart high-side power switch, 90 mΩ RDS(on)
- PROFET™+ 12V family with Smart6 technology
- Nominal load current: 3 A
- Wide operating voltage: 5 V to 28 V (41 V load dump)
- Proportional current sense output (kILIS ≈ 1500)
- Overcurrent protection with dynamic limitation
- Thermal shutdown with dynamic temperature limitation
- Open load detection in ON and OFF states
- Short-circuit to ground and battery protection
- Undervoltage shutdown with hysteresis
- Overvoltage protection
- Loss of ground protection
- Reverse polarity protection (with external resistor)
- 3.3 V / 5 V CMOS compatible logic input
- ESD protection (2 kV HBM)
- Very low standby current (0.5 µA)
- PG-DSO-8-43-EP package with exposed thermal pad
- AEC-Q100 qualified, automotive grade
- RoHS compliant and green product
Applications
- Automotive body electronics and lighting control
- Interior and exterior lighting (P21W lamps, LED modules)
- Door module and seat actuator drivers
- HVAC blower and flap motor control
- Relay and solenoid drivers
- Industrial 12V/24V power distribution
- Replaces mechanical relays and fuses
- DC motor drivers for low-current applications












