Opens in a new tab

BTS6163DATMA1

Single ch high-side power switch, PROFET 24V, 6.5A, 16mOhm, current sense, AEC-Q100, DPAK-5

14689

Effective Inventory

Image for reference only

Manufacturer Part:

BTS6163DATMA1

Package:

PG-TO252-5-11 / DPAK-5 (6.5 x 5.5 x 2.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BTS6163DATMA1 is a Infineon product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.

Key Specifications

Type Smart High Side Power Switch (PROFET 24V)
Channels 1
Operating Voltage 5.5V to 62V
On-State Resistance 16 mOhm (Typ), 20 mOhm (Max)
Nominal Load Current 6.5A
Short Circuit Current 70A (Min)
Current Limit 70A
Diagnostics Proportional Current Sense
Power Dissipation 59W
Turn-On Time 300 us (Max)
Turn-Off Time 500 us (Max)
Protection Overtemp, Short Circuit, Overvoltage, Reverse Battery, Loss of GND/Vbb
Operating Temperature -40 C to +150 C
Package PG-TO252-5-11 (DPAK-5)
Qualification AEC-Q100
Packaging Tape and Reel (2500 units)

Features

Ultra-low 16 mOhm on-state resistance; 6.5A nominal load current; 70A short circuit current capability; Proportional load current sense with diagnostic feedback; Reverse battery protection (Reversave); Overtemperature shutdown with automatic restart; Short circuit protection; Overvoltage protection including load dump; Loss of ground and loss of Vbb protection; Fast demagnetization of inductive loads; ESD protection; AEC-Q100 qualified; Green Product (RoHS compliant); Tape and reel packaging

Applications

Domain controller for ADAS and autonomous driving; Electric vehicle drivetrain systems; 24V industrial systems; Truck and agriculture vehicle solutions; Motor drive and solenoid control; Power distribution modules; Replaces electromechanical relays and fuses

Product Introduction: BTS6163DATMA1 Product Introduction

The BTS6163DATMA1 from Infineon Technologies is the tape-and-reel variant of the BTS6163D, a single-channel smart high-side power switch from the Classic PROFET 24V family. Featuring an ultra-low on-state resistance of 16 mOhm typical and a nominal load current of 6.5A with short circuit capability up to 70A, the device integrates an N-channel vertical power MOSFET with charge pump, current-controlled input, and proportional current sense diagnostic feedback, all monolithically implemented in Smart SIPMOS chip-on-chip technology. Designed for 24V and 42V DC grounded loads, the BTS6163DATMA1 is AEC-Q100 qualified and provides comprehensive embedded protection including reverse battery protection (Reversave), overtemperature shutdown with automatic restart, short circuit protection, overvoltage protection including load dump, and loss of ground and Vbb protection. The ATMA1 suffix indicates tape and reel packaging with 2500 units per reel, suitable for automated SMT production. The PG-TO252-5-11 (DPAK-5) package provides a thermal resistance of only 1.1 K/W junction-to-case for efficient heat dissipation.

Working Principle: BTS6163DATMA1 Working Principle

The BTS6163DATMA1 operates as a monolithic high-side power switch with integrated control, diagnostic, and protection functions. The N-channel vertical power MOSFET is driven by an internal charge pump that generates a gate voltage above the supply rail to fully enhance the transistor when the input pin is activated (current-controlled, active-low input). The proportional current sense (IS) output mirrors a fraction of the load current through an integrated sense FET, with the sense ratio determined by an external resistor (RIS). During normal operation, the IS pin provides a current proportional to the load current, enabling the MCU to monitor the load state via an ADC. During fault conditions (overload, overtemperature, or short circuit), the IS output transitions to a defined diagnostic current level per the device truth table, allowing the MCU to identify the specific fault type. The Reversave feature provides reverse battery protection by self-turn-on of the MOSFET in reverse polarity conditions, with the input resistor limiting current. Overvoltage protection clamps the drain voltage at approximately 68-73V during load dump transients.

Pin Description: BTS6163DATMA1 Pin Definition and Functions
Pin Name Type Function
1 OUT Output Output to load; pins 1 and 5 must be externally shorted
2 IN Input Input; activates the power switch when shorted to ground
3/Tab Vbb Power Supply voltage; tab and pin 3 are internally shorted (5.5V to 62V)
4 IS Sense Diagnostic feedback; sense current proportional to load current; fault signal during overload/overtemperature/short circuit
5 OUT Output Output to load; must be externally shorted to pin 1
Application Scenarios: In which products and applications is BTS6163DATMA1 used
  • ADAS Domain Controllers: Provides high-current protected switching for radar, lidar, and camera modules with diagnostic feedback for system health monitoring.
  • EV Power Distribution: Switches high-current 24V loads in electric vehicle power distribution units with reverse battery and load dump protection.
  • 24V Industrial Systems: Replaces electromechanical relays in factory automation with solid-state reliability and integrated current monitoring.
  • Truck and Agriculture: Drives 24V loads in commercial vehicles including lighting, HVAC, and hydraulic control systems.
Alternative Models: What chips are recommended as replacements for BTS6163DATMA1
Manufacturer Part Number Package RDS(on) Current Notes
Infineon BTS6163DAUMA1 PG-TO252-5 16 mOhm 6.5A Smaller reel (180mm)
Infineon BTS441RGATMA1 PG-TO263-5 15 mOhm 17A Higher current D2PAK option
STMicroelectronics VND5E160AJ PowerSSO-12 16 mOhm 6A VIPower alternative
NXP MC33889 SOIC-20 20 mOhm 5A eSwitch alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1