Opens in a new tab

C1206C226Z9VAC-TU

22µF 6.3V Y5V MLCC, 1206 package, -20%/+80% tolerance, general-purpose decoupling

4287

Effective Inventory

Image for reference only

Manufacturer Part:

C1206C226Z9VAC-TU

Package:

1206 (3216 Metric, 3.20 × 1.60 × 1.70 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The KEMET C1206C226Z9VAC-TU is a multilayer ceramic chip capacitor (MLCC) from the C1206 Series, featuring Y5V (Class III) dielectric in a 1206 (3216 Metric) surface-mount package. With 22µF capacitance at 6.3VDC rating and -20%/+80% tolerance, this component is designed for general-purpose bypass and decoupling applications where capacitance stability is not critical. It uses matte tin-plated terminations and is lead-free, RoHS, and REACH compliant.

Key Specifications

Manufacturer KEMET Electronics Corporation
Series C1206 (SMD Comm Y5V)
Capacitance 22µF (226 = 22 × 10⁶ pF)
Tolerance -20%, +80% (Z)
Rated Voltage 6.3VDC (9V)
Dielectric Y5V (Class III)
Package / Case 1206 (3216 Metric)
Dimensions 3.20 × 1.60 × 1.70 mm (L × W × T)
Operating Temperature -30°C ~ +85°C
Temperature Coefficient +22%, -82% over -30°C to +85°C
Dissipation Factor (DF) ≤10%
Insulation Resistance Not specified (Y5V Class III)
Termination Matte Tin-plated (Ni/Sn)
Mounting Type Surface Mount, MLCC
Packaging Tape & Reel (7800), Cut Tape (TU)
RoHS Status ROHS3 Compliant
REACH Status REACH Unaffected
MSL 1 (Unlimited)
ECCN EAR99
Country of Origin Mexico

Features

  • High bulk capacitance (22µF) in 1206 footprint for compact power rail decoupling
  • Y5V Class III dielectric achieves maximum capacitance density at low voltage ratings
  • Non-polar device simplifies PCB layout with no orientation concern
  • Matte tin-plated terminations ensure reliable lead-free solder joints
  • Lead-free, RoHS, and REACH compliant for global manufacturing compliance
  • MSL 1 (unlimited floor life) requires no special moisture handling
  • Available in tape & reel (7800 pcs) and cut tape (TU) packaging options

Applications

  • Low-voltage (3.3V/5V) power rail bypass and decoupling
  • Bulk charge storage for DC-DC converter output filtering
  • Consumer electronics power management where capacitance stability is non-critical
  • General-purpose noise filtering in digital circuits
  • Board-level power integrity in portable and battery-powered devices
Product Introduction: C1206C226Z9VAC-TU Product Introduction

The KEMET C1206C226Z9VAC-TU is a surface-mount multilayer ceramic chip capacitor from the C1206 Series, utilizing Y5V (Class III) dielectric material to achieve 22µF of capacitance within the 1206 (3216 Metric) form factor. This component is part of KEMET’s commercial-grade MLCC portfolio, designed specifically for bypass and decoupling applications where volumetric efficiency takes priority over capacitance stability.

Y5V dielectric is classified by EIA as a Class III ceramic material, offering the highest capacitance density among standard MLCC dielectrics but with significant trade-offs in temperature and voltage stability. Over the operating range of -30°C to +85°C, capacitance can vary by +22% to -82%, and DC bias effects can further reduce effective capacitance by 50% or more at rated voltage. These characteristics make Y5V capacitors unsuitable for precision timing, filtering, or resonant circuits, but well-suited for bulk decoupling where the primary requirement is maximum charge storage in minimum board area.

The component features matte tin-plated terminations over a nickel barrier layer, compatible with standard lead-free reflow soldering profiles. It is fully compliant with RoHS3 and REACH regulations, and carries an MSL 1 rating, eliminating moisture sensitivity concerns during PCB assembly. Manufactured at KEMET’s facility in Mexico, this part is available in both tape & reel (7800 pcs/reel, suffix 7800) and cut tape (suffix TU) packaging formats.

Working Principle: C1206C226Z9VAC-TU Working Principle

1. Y5V Dielectric Mechanism: The Y5V dielectric is based on barium titanate (BaTiO₃) formulated to maximize dielectric constant (K), typically reaching 8000–15000. This extremely high permittivity enables the 22µF capacitance value in the relatively small 1206 package. However, this high-K formulation comes at the cost of pronounced ferroelectric behavior — the dielectric constant drops sharply with applied DC voltage (DC bias effect) and varies dramatically with temperature.

2. Temperature and Voltage Dependence: Over the -30°C to +85°C range, Y5V capacitance changes by +22% to -82% relative to the 25°C reference value. At the extremes, near -30°C and near +85°C, capacitance drops significantly. When DC bias voltage is applied, the effective capacitance can decrease by 40–60% or more at voltages approaching the 6.3V rating. Designers must account for these combined effects — at -30°C with full DC bias, the actual capacitance may be less than 15% of the nominal 22µF value.

3. Multilayer Stacking Architecture: Internally, the capacitor consists of many alternating layers of Y5V ceramic dielectric and nickel inner electrodes, co-fired into a monolithic structure. Each electrode pair forms a parallel-plate capacitor, and the parallel combination of all layers yields the total capacitance. The outer terminations connect to alternating inner electrode sets through wraparound contacts.

4. Decoupling Function: In power rail decoupling applications, the capacitor acts as a local charge reservoir. When a load transient demands current faster than the power supply can deliver, the stored charge in the capacitor supplies the transient current, maintaining voltage stability. The Y5V capacitor’s role is purely to provide bulk charge storage — its high ESR and ESL compared to Class I/II dielectrics limit its effectiveness at higher frequencies, where X5R/X7R or C0G capacitors are preferred.

Pin Description: C1206C226Z9VAC-TU Pin Definition and Functions
Terminal Name Type Function
1 Terminal A Passive (Non-polarized) Electrode connection — connects to one set of internal nickel electrode layers
2 Terminal B Passive (Non-polarized) Electrode connection — connects to the alternate set of internal nickel electrode layers

Note: MLCCs are non-polarized components; Terminal A and Terminal B are interchangeable. The 1206 package uses wraparound terminations on opposite ends of the ceramic body. No polarity marking exists on the component.

Application Scenarios: In which products and applications is C1206C226Z9VAC-TU used
  • 3.3V/5V Power Rail Bulk Decoupling: Positioned near power pins of digital ICs to provide local charge storage for load transients. Y5V’s wide tolerance is acceptable because the decoupling function depends on charge reservoir size, not precise capacitance value
  • DC-DC Converter Output Filtering: Used at the output of buck regulators in consumer electronics to supplement X5R/X7R capacitors with additional bulk capacitance at low cost
  • Consumer Electronics Power Management: Power rail stabilization in cost-sensitive devices such as set-top boxes, digital photo frames, and home appliances where operating temperature remains near 25°C and Y5V performance is acceptable
  • Battery-Powered Device Charge Reservoir: Local energy storage for IoT sensors and portable devices operating at 3.3V or lower, where the low operating voltage keeps Y5V DC bias effects manageable
  • General-Purpose Noise Filtering: Low-frequency noise suppression on power distribution networks where precise capacitance values and tight temperature stability are not design requirements
Alternative Models: What chips are recommended as replacements for C1206C226Z9VAC-TU
Manufacturer Part Number Package Capacitance Voltage Dielectric Notes
KEMET C1206C226K8RACTU 1206 22µF 6.3V X7R Same manufacturer, X7R upgrade, ±10% tolerance, -55~125°C, recommended replacement
Murata GRM32ER70J226ME15L 1210 22µF 6.3V X7R X7R dielectric, larger footprint (1210 vs 1206), superior stability
Samsung CL32B226KQ6NNNE 1210 22µF 6.3V X7R X7R alternative, wider temperature range, ±10% tolerance
TDK C3225X5R0J226K250AB 1210 22µF 6.3V X5R X5R dielectric, better stability than Y5V, ±10% tolerance
Yageo CC1210ZKY5V8BB226 1210 22µF 6.3V Y5V Y5V equivalent, larger 1210 package, same -20/+80% tolerance

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1