Opens in a new tab

CAT24C02TDI-GT3A

2Kbit I2C EEPROM, 400kHz, TSOT-23-5

12066

Effective Inventory

Image for reference only

Manufacturer Part:

CAT24C02TDI-GT3A

Package:

TSOT-23-5 (2.9 x 1.6 x 0.87 mm, 0.95mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CAT24C02TDI-GT3A from onsemi is a 2Kbit I2C serial EEPROM with 256×8 organization, 400kHz clock, and TSOT-23-5 package.

Key Specifications

Type 2Kbit I2C Serial EEPROM
Density 2 Kbit (256 x 8 bits)
Organization 256 bytes x 8 bits
Interface I2C (Standard 100kHz / Fast 400kHz)
Page Size 16 bytes
Supply Voltage 1.7V to 5.5V
Write Cycle Time 5 ms (max, page write)
Access Time 900 ns (max)
Endurance 1,000,000 write cycles
Data Retention 100 years
Standby Current 3 uA (max)
Package TSOT-23-5 (2.9 x 1.6 x 0.87 mm)
Operating Temperature -40C to +85C

Features

  • 2Kbit (256 bytes) I2C EEPROM
  • 400kHz Fast-mode I2C support
  • 1.7V to 5.5V wide operating voltage
  • 16-byte page write buffer
  • Hardware write protection (WP pin)
  • Schmitt triggers and noise suppression on SCL/SDA
  • Power-on reset (POR) circuit
  • 1M write cycle endurance, 100-year retention

Applications

  • Configuration storage
  • Calibration data storage
  • Sensor offset storage
  • Small parameter storage
Product Introduction: CAT24C02TDI-GT3A Product Introduction

The CAT24C02TDI-GT3A from onsemi is a 2Kbit (256 bytes) serial I2C EEPROM in an ultra-compact TSOT-23-5 package. The device supports both Standard (100kHz) and Fast (400kHz) I2C modes, providing flexible data rates for various MCU I2C peripherals. The 1.7V to 5.5V supply voltage range allows operation from low-voltage 1.8V MCUs up to 5V systems without level translation. The 16-byte page write buffer allows up to 16 bytes to be written in a single internal write cycle, reducing overall write time for multi-byte data structures. The hardware write protection (WP) pin can prevent inadvertent writes to the entire memory array. Schmitt trigger inputs on SCL and SDA provide improved noise immunity in electrically noisy environments. The internal power-on reset (POR) circuit ensures the EEPROM is in a known state after power-up, preventing data corruption during brown-out conditions. The 1 million write cycle endurance and 100-year data retention provide exceptional reliability for configuration and calibration data storage. The GT3A suffix indicates tape and reel packaging with 3000 units per reel.

Working Principle: CAT24C02TDI-GT3A Working Principle

The CAT24C02TDI-GT3A uses a floating-gate CMOS EEPROM cell array to store data. Each byte consists of 8 floating-gate transistors that can hold charge indefinitely (100-year retention) when no power is applied. Writing data involves tunneling electrons onto the floating gate through Fowler-Nordheim tunneling, which requires approximately 14V generated by an internal charge pump from the 1.7-5.5V supply. The write operation is initiated by sending an I2C START condition, the device address byte (1010A2A1A0R/W#), the word address byte, and up to 16 data bytes, followed by a STOP condition. The internal write cycle takes up to 5ms, during which the device does not acknowledge I2C bus requests (ACK polling can be used to detect completion). Reading data is non-destructive: after sending the device address and word address, the master issues a repeated START with the R/W# bit set to 1, and the EEPROM shifts out data bytes while incrementing the internal address counter. The Schmitt triggers on SCL and SDA inputs convert slowly-rising or noisy signals into clean digital edges, preventing false clock or data detection. The WP pin, when tied HIGH, prevents write operations to the entire memory array while still allowing reads.

Pin Description: CAT24C02TDI-GT3A Pin Definition and Functions
Pin Name Type Function
1 SCL Input I2C serial clock (Schmitt trigger)
2 SDA I/O I2C serial data (open-drain, Schmitt trigger)
3 A0 Input Address bit 0 (connect to VCC or GND)
4 VSS Power Ground
5 VCC Power Supply voltage (1.7V-5.5V)
Application Scenarios: In which products and applications is CAT24C02TDI-GT3A used
  • Sensor calibration offset storage with 2Kbit capacity, 100-year retention, and 1.8V operation from low-power MCU
  • Device configuration parameter storage with 16-byte page write and WP hardware protection against accidental overwrite
  • Small form-factor TSOT-23-5 EEPROM for space-constrained IoT node with 400kHz I2C fast-mode readback
Alternative Models: What chips are recommended as replacements for CAT24C02TDI-GT3A
Manufacturer Part Number Package Notes
onsemi CAT24C02WI-GT3 SOIC-8 Same function, larger package
Microchip AT24C02DN-SH-B TSSOP-8 2Kbit, similar spec
ST M24C02-WMN6TP SOIC-8 2Kbit, SOIC-8
onsemi CAT24C04TDI-GT3A TSOT-23-5 4Kbit, same package
onsemi CAT24C01TDI-GT3A TSOT-23-5 1Kbit, smaller capacity

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1