Opens in a new tab

Home » Integrated Circuits ICs » CAT24C512WI-GT3

CAT24C512WI-GT3

512Kb I2C EEPROM, 1MHz, 128B page, ECC, 1M cycles, 100yr retention, SOIC-8

8960

Effective Inventory

Image for reference only

Manufacturer Part:

CAT24C512WI-GT3

Package:

SOIC-8 (5.00 x 5.85 x 1.75 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CAT24C512WI-GT3 from onsemi is a 512-Kb (64K x 8) I2C serial EEPROM with 128-byte page write buffer, on-chip ECC, and support for Standard (100kHz), Fast (400kHz), and Fast-Plus (1MHz) I2C protocols in an SOIC-8 package.

Key Specifications

Memory Size 512 Kbit (64K x 8)
Interface I2C (100kHz / 400kHz / 1MHz)
Page Write Buffer 128 bytes
Write Cycle Time 5 ms
Write Endurance 1,000,000 cycles
Data Retention 100 years
Supply Voltage 1.8 V to 5.5 V
Standby Current 2 uA max
Active Current 1 mA max (read)
On-Chip ECC Yes
Hardware Write Protect Yes (WP pin, entire memory)
Address Pins 3 (up to 8 devices on bus)
Operating Temperature -40°C to +85°C
Package SOIC-8

Features

  • 512Kbit I2C EEPROM with 128-byte page write for efficient data storage
  • Supports Standard, Fast, and Fast-Plus I2C modes up to 1MHz
  • On-chip ECC (Error Correction Code) for high-reliability applications
  • 1 million write cycle endurance and 100-year data retention
  • Hardware write protection and Schmitt trigger inputs for noise immunity

Applications

  • Configuration and calibration data storage in industrial systems
  • Firmware parameter and user setting storage in consumer electronics
  • High-reliability data logging with on-chip ECC protection
Product Introduction: CAT24C512WI-GT3 Product Introduction

The CAT24C512WI-GT3 from onsemi is a 512-Kb serial I2C EEPROM internally organized as 65,536 words of 8 bits each. The device supports Standard (100kHz), Fast (400kHz), and Fast-Plus (1MHz) I2C protocols for flexible system integration. The 128-byte page write buffer enables efficient writing of large data blocks. On-chip ECC (Error Correction Code) provides single-bit error correction, making the device suitable for high-reliability applications where data integrity is critical. The hardware write protect (WP) pin protects the entire memory array when driven high. Schmitt trigger inputs and noise suppression filters on the SCL and SDA pins provide robust noise immunity in electrically harsh environments. Three address pins (A0, A1, A2) allow up to eight CAT24C512 devices to share the same I2C bus. The device features 1 million program/erase cycle endurance and 100-year data retention.

Working Principle: CAT24C512WI-GT3 Working Principle

The CAT24C512WI-GT3 is a serial I2C EEPROM using floating-gate NMOS technology. (1) I2C Interface: The device communicates via a 2-wire I2C bus. The master initiates communication by sending a start condition followed by the 7-bit device address (1010xxx) and read/write bit. The 17-bit word address (A16-A0) specifies the memory location. (2) Write Operation: In page write mode, up to 128 bytes can be written in a single operation. Data is first written to the page buffer, then the internal write cycle programs the non-volatile memory cells within 5ms. The ECC engine calculates and stores error correction bits alongside each data word. (3) Read Operation: Sequential read mode allows reading the entire 512Kbit memory in a continuous stream by sending ACK after each byte. The access time is 400ns maximum at 1MHz. (4) ECC: The on-chip ECC engine corrects single-bit errors during read operations, significantly improving data reliability over the device lifetime. (5) Write Protect: When WP is high, all write operations are inhibited, protecting the entire memory from accidental modification.

Pin Description: CAT24C512WI-GT3 Pin Definition and Functions
Pin Name Function
1 A0 Address input 0
2 A1 Address input 1
3 A2 Address input 2
4 VSS Ground
5 SDA Serial data I/O
6 SCL Serial clock input
7 WP Write protect (high=protect)
8 VCC Supply voltage (1.8-5.5V)
Application Scenarios: In which products and applications is CAT24C512WI-GT3 used
  • Configuration and calibration data storage with ECC protection in industrial systems
  • User settings and firmware parameter storage in consumer electronics
  • High-reliability data logging with 1M cycle endurance and 100yr retention
Alternative Models: What chips are recommended as replacements for CAT24C512WI-GT3
Manufacturer Part Number Package Notes
onsemi CAT24C512YI-GT3 TSSOP-8 TSSOP package version
Microchip AT24C512C-SSHL-T SOIC-8 512Kb, I2C, 1MHz
ST M24256-DFMC6TG SOIC-8 256Kb, similar

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1