Opens in a new tab

Home » Integrated Circuits ICs » CAT823RTDI-GT3

CAT823RTDI-GT3

Microprocessor reset IC, 3.08V threshold, push-pull, SOT-23-5

12427

Effective Inventory

Image for reference only

Manufacturer Part:

CAT823RTDI-GT3

Package:

SOT-23-5 (2.9×1.6mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CAT823RTDI-GT3 from onsemi is a microprocessor supervisory reset IC with 3.08V threshold, 200ms reset timeout, push-pull active-high reset output in SOT-23-5 for MCU brownout detection.

Key Specifications

Threshold 3.08V
Reset Output Push-pull active-high
Timeout 200ms min
Supply 1.0-5.5V
Iq 5uA typ
Temp -40~85C

Features

  • Precision 3.08V threshold
  • 200ms reset timeout
  • Push-pull active-high output
  • 5uA low supply current
  • Manual reset input

Applications

  • MCU supervisory circuits
  • Brownout detection
  • Power-on reset
  • Embedded systems
  • FPGA/CPU monitoring
Product Introduction: CAT823RTDI-GT3 Product Introduction

The CAT823RTDI-GT3 from onsemi is a microprocessor supervisory reset IC with 3.08V threshold, 200ms reset timeout, push-pull active-high reset output in SOT-23-5 for MCU brownout detection.

Working Principle: CAT823RTDI-GT3 Working Principle

The CAT823RTDI-GT3 is a microprocessor reset IC from onsemi in SOT-23-5 with a 3.08V reset threshold and push-pull active-LOW output. It monitors the VCC supply voltage: when VCC drops below 3.08V (the reset threshold for the R suffix), the RESET output immediately goes LOW, holding the MCU in reset. When VCC rises above the threshold, the internal timer starts a 140ms (typical) reset timeout before releasing RESET HIGH, ensuring the supply and oscillator are stable before the MCU starts executing code. The MR (Manual Reset) pin allows an external push-button or logic signal to trigger a reset: pulling MR below 0.4V activates RESET LOW for as long as MR is held LOW plus the 140ms timeout after MR is released. The internal pull-up resistor (approximately 30k-ohm) on MR means it can be left floating if manual reset is not needed. The push-pull output (TDI suffix) actively drives both HIGH and LOW, unlike open-drain versions that require an external pull-up resistor. The T suffix in RTDI specifies the 3.08V threshold. Operating current is only 5uA at 3.3V, making it suitable for battery-powered applications. The device operates from 1.0V to 5.5V, with valid RESET output guaranteed down to VCC=1.0V. The -GT3 suffix denotes tape-and-reel, automotive grade.

Pin Description: CAT823RTDI-GT3 Pin Definition and Functions
Pin Name Type Function
1 MR Input Manual reset input (active low, internal pull-up)
2 VSS Power Ground
3 RESET Output Active-low reset output (push-pull)
4 NC – No connect
5 VCC Power Supply (1.0-5.5V)
Application Scenarios: In which products and applications is CAT823RTDI-GT3 used
  • MCU supervisory circuits
  • Brownout detection
  • Power-on reset
  • Embedded systems
  • FPGA/CPU monitoring
  • Alternative Models: What chips are recommended as replacements for CAT823RTDI-GT3
    Manufacturer Part Number Package Notes
    onsemi CAT823ZTDI-GT3 SOT-23-5 Same device, open-drain reset output
    Texas Instruments TPS3839K33DBVR SOT-23-5 3.3V reset IC, 150nA Iq, push-pull
    Maxim MAX809STRG+T SOT-23-5 3.08V reset IC, push-pull, 240ms timeout
    Analog Devices ADM803RARTZ-REEL7 SOT-23-5 2.93V reset IC, push-pull
    STMicroelectronics STM809SWX6F SC-70-3 2.93V reset IC, minimal footprint

    Recommend Parts

    IRFS4310ZTRLPBF

    IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

    Brand: infineon

    Package: D2PAK (TO-263AB)

    IN STOCK: 11137pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MSASJ105BB5475MFNA01

    4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

    Brand: gigadevice

    Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

    IN STOCK: 9701pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRF3415PBF

    150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 2940pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    105017-1001

    USB Type-C receptacle connector, 24-pin, SMD

    Brand: Amphenol

    Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

    IN STOCK: 5335pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRLB3034PBF

    IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 9724pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    XC6SLX75-2FGG484I

    Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

    Brand: xilinx

    Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

    IN STOCK: 890pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1